Einführung
Das Wampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
Produkt überview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
Abbildung 1: Front view des Wampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
Abbildung 2: Abgewinkelt view des Wampler Catacombs pedal, highlighting its compact design and various control knobs.
Aufstellen
Strombedarf
Das Wampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
Anschließen des Pedals
- Schließen Sie Ihr Instrument (z. B. Gitarre) an den/die/das an. MONO IN or STEREO-EING Anschlussbuchse auf der rechten Seite des Pedals mit einem Standard-Instrumentenkabel (6,35 mm).
- Verbinden Sie MONO AUS or STEREO OUT Klinkenstecker auf der linken Seite des Pedals zu Ihrem ampVerstärker oder nächstes Effektpedal.
- Connect the 9V DC power supply to the 9 V Gleichstrom Eingangsbuchse.
- For MIDI control, connect a MIDI cable to the MIDI Eingang.
Bedienungsanleitung
Kontrollen überview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Formt den Klang der verzögerten Wiederholungen.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
Voreinstellungen speichern und abrufen
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
Wartung
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Lagern Sie das Pedal an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.
- Bei längerem Nichtgebrauch die Stromzufuhr unterbrechen.
- Überprüfen Sie regelmäßig alle Kabelverbindungen auf festen Sitz.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Geräusch beim Betätigen des Pedals. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Voreinstellungen können nicht gespeichert oder abgerufen werden. | Falsche Fußschalterfunktion. | Ensure you are holding the Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | Ground loop, faulty power supply, interference. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
Technische Daten
- Modell: CATACOMBS
- Abmessungen: 7.25 x 5.7 x 3.75 Zoll
- Artikelgewicht: 1.39 Pfund
- Energiequelle: Corded Electric (9V DC, center-negative, power supply not included)
- Signalformat: Analog
- Audio Output Effects: Verzögerung, Nachhall
- Sampling-Rate: 48 kHz
- Audio Bit Depth: 24-Bit
- Voreinstellungen: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
Garantie und Support
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampler Pedale webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
Weitere Unterstützung finden Sie unter Wampler Store on Amazon.
