Produkt überview
The Topaz 2-foot LED Linear Strip Luminaire is designed for versatile lighting applications in commercial facilities. This fixture features a 3-CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3500K, 4000K, and 5000K to achieve the desired lighting environment. Its design facilitates direct surface mounting and includes press-to-release buttons for tool-less access to the wiring compartment, simplifying installation in various settings such as healthcare facilities, offices, and retail locations. It is suitable for both new construction and remodeling projects.
Wichtige Sicherheitshinweise
Bitte lesen und verstehen Sie alle Anweisungen, bevor Sie diese Leuchte installieren oder in Betrieb nehmen. Die Nichtbeachtung dieser Anweisungen kann zu Stromschlag, Brand oder anderen Gefahren führen.
- WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Die Installation muss von einem qualifizierten Elektriker gemäß allen nationalen und lokalen Elektrovorschriften durchgeführt werden.
- Sicherstellung der Versorgungsvoltage is compatible with the fixture's requirements (120-277V AC).
- Nicht in der Nähe von Wärmequellen oder in Bereichen mit übermäßiger Feuchtigkeit installieren.
- Do not handle energized fixture with wet hands.
- Diese Leuchte ist nur für den Innenbereich bestimmt.
Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- LED Linear Strip Luminaire (1 unit)
- Montagezubehör (Schrauben, Dübel)
- Bedienungsanleitung (dieses Dokument)
Image: The Topaz LED 2' Linear Strip Luminaire shown with included mounting screws and a mounting plate. The fixture is white with a translucent diffuser, and wiring is visible at one end.
Installationshandbuch
Follow these steps for proper installation of your LED Linear Strip Luminaire.
Schritt 1: Bereiten Sie die Installation vor
- Turn off power at the circuit breaker or fuse box before starting.
- Packen Sie die Leuchte aus und überprüfen Sie sie auf eventuelle Beschädigungen.
- Identify the desired mounting location. Ensure the surface is suitable for supporting the fixture's weight.
Schritt 2: Montage des Geräts
- Position the fixture against the mounting surface and mark the locations for mounting screws.
- Drill pilot holes if necessary, and insert wall anchors if mounting into drywall.
- Secure the fixture to the mounting surface using the provided screws. Ensure it is firmly attached.
Schritt 3: Kabelverbindungen
- Access the wiring compartment by pressing the release buttons on the fixture. This allows tool-less access.
- Schließen Sie die elektrischen Leitungen an:
- Verbinden Sie Schwarz Kabel von der Leuchte zum live/hot wire from the supply.
- Verbinden Sie Weiß Kabel von der Leuchte zum neutral wire from the supply.
- Verbinden Sie green/ground Kabel von der Leuchte zum Boden wire from the supply.
- Stellen Sie sicher, dass alle Verbindungen mit geeigneten Drahtverbindern sicher sind.
- Carefully tuck all wires into the wiring compartment and close the cover securely.
Step 4: CCT Selection (Before Final Power On)
Before restoring power, select your desired Correlated Color Temperature (CCT) using the integrated dip-switch. This switch is located on the fixture, typically near the wiring compartment.
Bild: Eine Nahaufnahme view of the CCT selectable switch on the side of the LED linear strip. The switch has three positions labeled 3500K, 4000K, and 5000K, allowing the user to choose the color temperature.
- 3500K: Warmweiß
- 4000K: Cool White / Neutral White
- 5000K: Tageslicht
Slide the switch to your preferred CCT setting. Once set, restore power to the circuit.
Bedienungsanleitung
Once installed and powered, the Topaz LED Linear Strip Luminaire will operate according to the selected CCT setting. If you wish to change the CCT, you must first disconnect power to the fixture at the circuit breaker, then access the CCT selectable switch as described in Step 4 of the Installation Guide, adjust the setting, and finally restore power.
Wartung
The Topaz LED Linear Strip Luminaire requires minimal maintenance.
- Reinigung: Vor der Reinigung unbedingt ausschalten. Verwenden Sie ein weiches, trockenes oder leicht angefeuchtetes Tuch.amp Verwenden Sie ein Tuch, um die Außenseite der Leuchte abzuwischen. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
- Lamp Ersatz: The LED light source is integrated and not user-replaceable. The fixture is designed for a long operational life of 50,000 hours.
Fehlerbehebung
If you encounter issues with your LED Linear Strip Luminaire, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Die Leuchte leuchtet nicht. | Keine Stromversorgung; lose Verkabelung; defekte Leuchte. | Check circuit breaker/fuse. Verify all wiring connections are secure. If problem persists, contact a qualified electrician or customer support. |
| Das Licht flackert oder ist schwach. | Loose wiring; incompatible dimmer (if applicable); voltage Schwankungen. | Check wiring connections. Ensure dimmer is LED compatible. Consult an electrician for voltage-Probleme. |
| Incorrect CCT (color temperature). | Der CCT-Schalter ist falsch eingestellt. | Turn off power, open wiring compartment, and adjust the CCT selectable switch to the desired setting (3500K, 4000K, or 5000K). Restore power. |
Technische Daten
| Marke | Topas |
| Modellnummer | F-L2/20W/CTS/D-87 |
| Wastage | 20 Watt |
| CCT wählbar | 3500K, 4000K, 5000K (via 3-way dip-switch) |
| Lumenleistung | 2600/2800/2700 Lumens (depending on CCT) |
| Nennlebensdauer | 50,000 Stunden |
| Montage | Direkte Oberflächenmontage |
| UPC / EAN | 751338039407 |
Garantie und Support
This Topaz product is backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Topaz webWebsite.
For technical support, troubleshooting assistance, or warranty claims, please contact Topaz customer service. Keep your purchase receipt and model number (F-L2/20W/CTS/D-87) readily available when contacting support.
Note: Contact information for Topaz can typically be found on their official webStandort oder Produktverpackung.
