REPTITRIP Reptilien-Heizmatte mit PID-Thermostat (Modell 8X12"-24W) Bedienungsanleitung

Einführung

This manual provides instructions for the safe and effective use of your REPTITRIP Reptile Heating Pad with PID Thermostat. This device is designed to provide a controlled heat source for reptile terrariums, helping to maintain a stable and appropriate temperature for your pets. Please read all instructions carefully before installation and operation.

Wichtige Sicherheitsinformationen

Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.

• This product is intended for household use only, specifically for heating reptile terrariums.
• Do not immerse the heating pad or thermostat controller in water. The heating pad is waterproof (IP67 rated) but not designed for submersion.
• Do not use the heating pad if it is folded or creased. Ensure it lies flat.
• Do not use the heating pad directly on a metal tank, as this can lead to inefficient heating or damage.
• Prolonged application at high temperature settings can cause skin burns to animals. Always monitor the temperature carefully.
• Discontinue use immediately if the heating pad shows any signs of deterioration, such as cracking, blistering, or melting.
• The heating pad features a built-in temperature sensor that will stop heating if the internal temperature reaches 122°F (50°C) to prevent overheating.
• Keep out of reach of children and pets not intended for its use.

Produkt überview

The REPTITRIP Reptile Heating Pad system includes a heating mat and an intelligent PID thermostat controller. It is designed to provide precise and stable temperature control for reptile habitats.

Hauptmerkmale:

• PID Intelligent Thermostat: Accurately controls heating temperature for efficiency and stability.
• Schnelles Aufheizen: 24W power heats to 113°F (45°C) in approximately 1 minute.
• Hochtemperaturschutz: Automatically stops heating at 122°F (50°C).
• Temperaturerkennung: Built-in sensor and external probe for real-time temperature monitoring.
• Langlebige Konstruktion: 5-layer design including PVC material, lagging, and heating layer.
• Wasserdichtes Design: IP67 rated heating pad (do not immerse).
• Kleberücken: Equipped with 3M adhesive for secure mounting.

Installationsanweisungen

1. Ort wählen: Select a suitable location for the heating pad, typically on the bottom or side of a glass terrarium. Ensure the surface is clean and dry.
2. Apply Heating Pad: Remove the protective film from the 3M adhesive backing on the heating pad. Carefully press the pad firmly onto the chosen surface of the terrarium. Ensure there are no air bubbles or wrinkles.
3. Position des Temperaturfühlers: Place the external temperature probe inside the terrarium, near the area where the heat is needed most, but away from direct contact with the heating pad to ensure accurate ambient temperature readings. Secure it to prevent movement.
4. Thermostat anschließen: Plug the heating pad into the thermostat controller. Then, plug the thermostat controller into a standard electrical outlet.

Bedienungsanleitung

The PID thermostat controller allows for precise temperature management. The controllable temperature range is 68°F to 113°F (20°C to 45°C).

Controller-Funktionen:

• LCD Anzeige: Shows current time, sensor temperature, set temperature, and power percentage.
• EIN/AUS-Taste: Zum Ein- oder Ausschalten des Geräts drücken und halten.
• Set-Taste: Drücken Sie diese Taste, um in den Temperatureinstellungsmodus zu gelangen.
• '+'-Schaltfläche: Increases the set temperature or navigates menu options.
• '-' Taste: Decreases the set temperature or navigates menu options.
• OK-Taste: Bestätigt die Auswahl.

Temperatur einstellen:

1. Drücken Sie die SATZ button. The set temperature display will begin to flash.
2. Verwenden Sie die + or - Tasten, um die gewünschte Temperatur einzustellen.
3. Drücken Sie die OK button to confirm your setting. The display will stop flashing.

Switching Between °F and °C:

To switch the temperature display between Fahrenheit (°F) and Celsius (°C), long press the SATZ und die + gleichzeitig drücken.

Wartung

• Reinigung: Disconnect the power before cleaning. Wipe the heating pad and controller with a damp Tuch. Keine Scheuermittel verwenden und das Gerät nicht in Wasser tauchen.
• Inspektion: Regularly inspect the heating pad and power cords for any signs of damage, wear, or deterioration. If any damage is observed, discontinue use and replace the unit.
• Lagerung: When not in use, store the heating pad and controller in a dry, cool place, away from direct sunlight and extreme temperatures.

Fehlerbehebung

• No Power/Heating:
  • Stellen Sie sicher, dass das Netzkabel fest in eine funktionierende Steckdose eingesteckt ist.
  • Check if the thermostat controller is powered on (press and hold the ON/OFF button).
  • Verify that the heating pad is correctly plugged into the thermostat controller.
• Falsche Temperaturanzeige:
  • Ensure the external temperature probe is properly positioned within the terrarium and not directly touching the heating pad or other heat sources.
  • Check for any obstructions around the probe that might affect its reading.
• Temperaturschwankungen:
  • The PID system is designed for stable control, but significant external temperature changes or drafts can affect stability.
  • Ensure the terrarium is adequately insulated and placed in a stable environment.
• Heating Pad Overheating (reaching 122°F/50°C):
  • The built-in protection will temporarily stop heating. This is a safety feature.
  • Check if the set temperature is too high for the environment or if the pad is covered by insulating material that traps excessive heat.

Technische Daten

Garantie und Kundendienst

For warranty information, technical assistance, or customer support, please refer to the contact information provided with your purchase or visit the official REPTITRIP webBewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.