Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric 46-inch LED Utility Light. This fixture features a motion sensor, multiple operating modes, a timer, and remote control functionality, designed for use in various indoor environments such as garages, workshops, and storage areas.
Image: The Feit Electric 46-inch LED Utility Light, shown with hanging chains attached.
Sicherheitshinweise
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other hazards.
- Stellen Sie sicher, dass die Stromversorgung vor der Installation oder Wartung unterbrochen ist.
- Dieses Produkt ist nur für den Gebrauch in Innenräumen vorgesehen.
- Versuchen Sie nicht, die Vorrichtung zu verändern.
- Ziehen Sie einen qualifizierten Elektriker zu Rate, wenn Sie sich bei irgendeinem Teil der Installation unsicher sind.
Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- 1 x Feit Electric 46" LED Utility Light
- 1 x Fernbedienung
- Mounting Hardware (chains, screws, anchors)
Image: A collection of mounting hardware including chains, screws, and anchors.
Image: The remote control, a wall mount bracket, and batteries for the utility light.
Technische Daten
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | SHOP/4/840/MM |
| Abmessungen (L x B x H) | 46.2" x 2.1" x 2.2" |
| Wastage | 55 W |
| Helligkeit | 5000 Lumen |
| Farbtemperatur | 4000K Kaltweiß |
| Bandtage | 120 Volt |
| Lebensdauer | Bis zu 50,000 Stunden |
| Besondere Merkmale | Motion Sensor, Remote Controlled |
| Installationstyp | Flush Mount, Hanging |
| Verwendung im Innen- und Außenbereich | Innenbereich |
| Material | Plastik |
Image: Diagram illustrating the 46-inch length, 2-inch width, and 3.35-inch height of the light, along with icons for 55W, 5000 Lumens, 50,000 Hours, 4000K Color Temperature, Link up to 6 Fixtures, 5 Motion Detection Options, 7 Motion Timer Options, Intuitive IR Wireless Remote included, and 10 Adjustable Brightness Levels.
Setup und Installation
The Feit Electric LED Utility Light offers versatile installation options: hanging or flush mount. Ensure the power source is off before installation.
Hängende Installation
- Attach the hanging chains to the designated points on the fixture.
- Securely fasten the other end of the chains to a sturdy ceiling structure using the provided hooks and screws.
- Adjust the chain length to achieve the desired height.
Unterputzmontage
- Position the fixture against the ceiling at the desired location.
- Mark the mounting points through the fixture's mounting holes.
- Bohren Sie gegebenenfalls Vorbohrungen und setzen Sie Wandanker ein.
- Befestigen Sie die Leuchte mit den mitgelieferten Schrauben an der Decke.
After mounting, plug the 5-ft. cord into a standard electrical outlet.
Image: A visual comparison showing how to perform a flush mount installation with screws and a hanging installation with chains and hooks.
Bedienungsanleitung
The utility light can be operated manually or via the included remote control.
Fernbedienungsfunktionen
The remote control allows for comprehensive management of the light's features:
Image: A detailed diagram of the remote control, labeling buttons for ON/OFF, increasing/Dekrementasing light level, setting to highest brightness, resetting to default, setting lowest light level, motion timer options (30s, 1min, 3min, 5min, 10min, 15min, 30min), and motion range settings (2-5ft, 5-10ft, 10-15ft, 15-25ft, 20-25ft).
- Netzschalter: Schaltet das Gerät EIN oder AUS.
- Helligkeitsstufe: Use the up/down arrows to increase or decrease light intensity.
- HOCH NIEDRIG: Quickly set to highest or lowest brightness. Press and hold HIGH for three seconds to reset to default settings.
- Motion Timer: Select from 30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, or 30 minutes. The light will turn off after the pre-selected time if no motion is detected.
- Bewegungsbereich: Set the motion sensor detection distance to 2-5ft, 5-10ft, 10-15ft, 15-25ft, or 20-25ft.
Bedienung des Bewegungssensors
The built-in PIR motion sensor detects movement and can automatically activate the light. There are 5 convenient lighting modes:
- Immer an: Das Licht bleibt dauerhaft an.
- Motion Sensor On/Off: Light turns on when motion is detected and off when no motion is detected for a set period.
- Motion Sensor with Timer: Light turns on with motion and stays on for the selected timer duration.
- Dimmmodus: Light operates at a reduced brightness level.
- Nachtmodus: Specific setting for low-light conditions.
Image: A woman walking in a kitchen, illustrating the motion detection range with options from 2-5ft to 20-25ft.
Wartung
This LED utility light is designed for long-lasting, maintenance-free operation. To ensure optimal performance:
- Reinigung: Vor der Reinigung die Stromzufuhr unterbrechen. Die Leuchte mit einem weichen, trockenen oder leicht feuchten Tuch abwischen.amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Lampenwechsel: The integrated LEDs are designed to last up to 50,000 hours and are not user-replaceable.
- Inspektion: Periodically check the mounting hardware for tightness and ensure the power cord is free from damage.
Fehlerbehebung
If you experience issues with your utility light, refer to the following common solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an | No power, loose connection, remote battery dead | Check power outlet, ensure cord is securely plugged in, replace remote batteries. |
| Bewegungssensor funktioniert nicht | Incorrect motion range setting, obstruction, ambient light too high | Adjust motion range on remote, clear obstructions, ensure sensor is not in direct bright light. |
| Das Licht flackert oder wird unerwartet schwächer | Unstable power supply, faulty unit | Überprüfen Sie die Stromversorgung. Sollte das Problem weiterhin bestehen, wenden Sie sich bitte an den Kundendienst. |
Garantie
This Feit Electric LED Utility Light is covered by a 5 Jahr Herstellergarantie. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official Feit Electric webWebsite oder wenden Sie sich an den Kundendienst.
Kundenservice
Für Kundensupport rund um die Uhr und weitere Informationen besuchen Sie bitte das Feit Electric Hilfezentrum:
Image: A graphic indicating 24/7 help and directing users to feit.com/help, accompanied by a QR code.
