Keeley Halo Andy Timmons Dual Echo Pedal Bedienungsanleitung

1. Einleitung

The Keeley Halo Andy Timmons Dual Echo pedal is a sophisticated delay effect designed to replicate Andy Timmons' signature delay sound. This pedal offers two independent delay settings (A and B) that can be switched between, along with a dedicated 'Halo' rhythm mode. It features a memory bank for storing presets and versatile controls for shaping your delay tone.

2. Einrichtung

2.1 Stromanschluss

Connect a standard 9V DC power supply (center negative) to the 9VDC input jack on the top of the pedal. Ensure the power supply meets the pedal's requirements to prevent damage.

2.2 Audioverbindungen

Connect your instrument or the output of a preceding pedal to the input jack. Connect the output jack to your amplifier or the input of a subsequent pedal. The Halo pedal supports both mono and stereo operation. Refer to the diagram below for typical connections.

Keeley Halo Andy Timmons Dual Echo Pedal front view with all controls and jacks visible.

Abbildung 1: Front view of the Keeley Halo Andy Timmons Dual Echo Pedal. This image displays the pedal's vibrant red enclosure, all control knobs, footswitches, and input/output jacks. The top row features 'TIME/HPF', 'FDBK (PRESS) ALT', and 'LEVEL/SATURATE' knobs. The middle row includes 'RATE/TONE' and 'DEPTH/RHYTHM' knobs, along with a toggle switch and A/B/Status LEDs. The bottom section shows the 'HALO Andy Timmons DUAL ECHO' branding, 'PRESETS' LEDs (1, 2, 3), and the 'A' and 'B' footswitches with their respective indicator LEDs. The Keeley logo is centered at the bottom.

3. Das Pedal betätigen

3.1 Kontrollen überview

TIME/HPF Knob: Controls the delay time. Pressing and holding this knob engages the High-Pass Filter (HPF) function, allowing you to filter the delay repeats.
FDBK (PRESS) ALT Knob: Adjusts the feedback (number of repeats) of the delay. Pressing and holding this knob activates the Alternate function, which can vary depending on the selected delay mode.
LEVEL/SATURATE Knob: Sets the overall output level of the delay effect. Pressing and holding this knob engages the Saturate function, adding a subtle drive or warmth to the repeats.
RATE/TONE Knob: In most modes, this controls the modulation rate. Pressing and holding this knob activates the Tone control, allowing you to brighten or darken the delay repeats.
DEPTH/RHYTHM Knob: Controls the modulation depth. Pressing and holding this knob engages the Rhythm mode selector, which allows you to choose different delay subdivisions, including the unique 'Halo' effect.
A/B Footswitches: These footswitches allow you to toggle between two independent delay settings (A and B). The corresponding LEDs indicate the active setting.
PRESETS LEDs (1, 2, 3): Indicate the currently selected preset. The pedal can store up to eight presets.
STATUS-LED: Indicates the pedal's bypass status and other operational information.

3.2 Switching Between Delay Settings (A/B)

Press the 'A' footswitch to activate delay setting A, or the 'B' footswitch to activate delay setting B. Each setting can have its own unique parameters for Time, Feedback, Level, Rate, and Depth. This allows for quick transitions between different delay sounds during performance.

3.3 Engaging the 'Halo' Effect

To access the 'Halo' effect, press and hold the DEPTH/RHYTHM knob. This will cycle through various rhythm modes, including the specific 'Halo' setting that provides Andy Timmons' signature delay sound. Experiment with the ZEIT Und FDBK controls to fine-tune the effect.

3.4 Voreinstellungen

The Halo pedal features a memory bank capable of storing up to eight presets. To save a preset, dial in your desired sound, then refer to the full manual for the specific save procedure (typically involving holding down a footswitch or combination of controls). To recall a preset, use the designated preset selection method, which will illuminate the corresponding PRESETS LED (1, 2, or 3).

3.5 Erweiterte Funktionen

Tippen Sie auf Tempo: The pedal includes a tap tempo function for synchronizing delay time to your playing. Consult the full manual for tap tempo activation.
Infinite Hold: An infinite hold feature allows for sustained delay repeats.
Trails/True Bypass: The pedal can operate in either trails mode (delay repeats decay naturally after bypass) or true bypass mode (signal is completely removed when bypassed).
Steuerung des Expression-Pedals: An external expression pedal can be connected to control various parameters in real-time.

4. Wartung

To ensure the longevity and optimal performance of your Keeley Halo pedal, follow these maintenance guidelines:

Reinigung: Reinigen Sie die Außenseite des Pedals mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
Lagerung: Lagern Sie das Pedal an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.
Stromversorgung: Always use a compatible 9V DC center-negative power supply. Disconnect power when not in use for extended periods.
Verbindungen: Periodically check all input/output jacks and power connections for secure fit.

5. Fehlerbehebung

If you encounter issues with your Keeley Halo pedal, refer to the following common problems and solutions:

Kein Ton:
- Stellen Sie sicher, dass die Stromversorgung korrekt angeschlossen ist und funktioniert.
- Prüfen Sie alle Audiokabel auf korrekten Anschluss und einwandfreie Funktion.
- Verify that the pedal is not in bypass mode if you expect an effect.
Schwacher oder verzerrter Ton:
- Überprüfen Sie die EBENE Knopfeinstellung.
- Ensure your instrument's output and amplifier's input levels are appropriate.
- Bei Verwendung des SÄTTIGEN function, adjust it to a lower setting if distortion is undesired.
Delay Not Functioning Correctly:
- Anpassen ZEIT Und FDBK knobs to hear the delay effect.
- If using presets, ensure the correct preset is selected.
- Reset the pedal to factory settings if issues persist (refer to the full manual for this procedure).

6. Spezifikationen

Modell: Halo Andy Timmons Dual-Echo-Pedal
Marke: Keeley Electronics
Artikelgewicht: 15.8 Unzen
Produktabmessungen: 5.45 x 4.15 x 2.7 Zoll
Signalformat: Analog
Energiequelle: Kabelgebundenes elektrisches Gerät (9V DC, Mittelkontakt negativ)
Farbe: Andy Apple Red

7. Garantie und Support

Keeley Electronics products are known for their quality and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Keeley Electronics website. For technical support, product inquiries, or service, please contact Keeley Electronics directly through their official support channels.

Offiziell WebWebsite: www.robertkeeley.com

	Keeley HALO Andy Timmons Dual Echo Bedienungsanleitung Umfassende Bedienungsanleitung für das Keeley HALO Andy Timmons Dual Echo-Gitarreneffektpedal mit Informationen zu primären und sekundären Bedienelementen, Fußschalterfunktionen, Tap Tempo, Infinite Hold, Trails/True Bypass, All Wet/Dry-Modus, Preset-Verwaltung, Verwendung des Expression-Pedals, Zurücksetzen auf Werkseinstellungen und technischen Daten.
	Keeley HALO Andy Timmons Dual Echo Delay Pedal User Manual Comprehensive user manual for the Keeley HALO Andy Timmons Dual Echo stereo delay pedal, detailing primary and secondary controls, footswitch functions, tap tempo, preset management, expression pedal integration, factory settings, and technical specifications.
	Keeley Nocturne Reverb Pedal: Kurzanleitung Comprehensive quick start guide for the Keeley Nocturne reverb pedal. Discover its three unique reverb modes (HALO, Spring, Plate), control settings, and advanced power-up functions. Learn about Preset and WYSIWYG modes, expression pedal setup, and bypass options.
	Keeley Halo Core Andy Timmons Signature Delay Pedal User Manual Comprehensive guide to the Keeley Halo Core Andy Timmons Signature Delay pedal, detailing its controls, modes, additional functions, power options, and bypass settings for guitarists.
	Keeley HALO Core Delay Pedal – Benutzerhandbuch und Funktionen Detaillierte Informationen zum Keeley HALO Core Delay-Pedal, einschließlich Bedienelementen, Sekundärfunktionen, Strombedarf und Bypass-Modi. Erfahren Sie, wie Sie den charakteristischen Delay-Effekt von Andy Timmons nutzen.
	Keeley Mk3 Driver Andy Timmons Full Range Overdrive Pedal Detailed information on the Keeley Mk3 Driver, an Andy Timmons signature full-range overdrive guitar pedal. Features include adjustable Tone, Drive, and Level controls, selectable clipping styles (Silicon-LED, Germanium), and true bypass/buffered bypass modes.

Keeley Halo

Keeley Halo Andy Timmons Dual Echo Pedal User Manual