1. Einleitung
This manual provides comprehensive instructions for the proper use and maintenance of your LUCORB Gym Timer Remote Control. Please read this manual thoroughly before operating the device to ensure correct functionality and to prevent damage.
Hinweis zur Kompatibilität: This remote controller is specifically designed as a replacement for the LUCORB 15-inch large display wall-mounted gym timer. It is not compatible with other brands or models of gym timers. Please verify that your existing remote matches the images provided in this manual before use.
2. Sicherheitshinweise
- Die Fernbedienung sollte vor Wasser und übermäßiger Feuchtigkeit geschützt werden.
- Setzen Sie die Fernbedienung weder direkter Sonneneinstrahlung noch extremen Temperaturen aus.
- Use only AAA batteries as specified. Do not mix old and new batteries or different types of batteries.
- Entsorgen Sie gebrauchte Batterien gemäß den örtlichen Vorschriften.
- Do not attempt to disassemble or repair the remote control yourself. Contact customer support if issues arise.
3. Packungsinhalt
- 1 x LUCORB Gym Timer Remote Control
- Hinweis: AAA-Batterien sind nicht im Lieferumfang enthalten und müssen separat erworben werden.
4. Produktüberschreitungview
The LUCORB Gym Timer Remote Control is designed for intuitive operation of your compatible gym timer. Its ergonomic design and clearly labeled buttons allow for quick and efficient control over various timer functions.

Abbildung 4.1: Schräg view of the LUCORB Gym Timer Remote Control, showcasing dank seines kompakten Designs und der Tastenanordnung.
Refer to the diagram below for a detailed layout of the remote control buttons and their corresponding functions.

Figure 4.2: Detailed diagram of the LUCORB Gym Timer Remote Control with each button clearly labeled for its function.
Tastenfunktionen
| Tastenbeschriftung | Funktion |
|---|---|
| ON/OFF (Red Power Button) | Powers the timer on or off. |
| DN | Countdown-Modus. |
| UP | Count Up mode. |
| ST | Stoppuhrmodus. |
| TA | TABATA interval timer mode. |
| HIIT | High-Intensity Interval Training mode. |
| FGB1 | Fight Gone Bad 1 interval timer mode. |
| FGB2 | Fight Gone Bad 2 interval timer mode. |
| 10er Jahre | Activates 10-second preparation time. |
| Symbol für Musiknotiz | Adjusts optional tone type. |
| Lautsprechersymbol | Passt die Lautstärke an. |
| Schleifensymbol | Activates Loop Countdown (EMOM). |
| Wiedergabe / Pause-Symbol | Starts, pauses, or resumes the timer. |
| Symbol überspringen | Adjusts countdown time before the end. |
| Pfeil nach oben | Page Up / Increase value. |
| Pfeil nach unten | Page Down / Decrease value. |
| Pfeil nach links | Left Shift / Navigate left. |
| Pfeil nach rechts | Right Shift / Navigate right. |
| OK | Confirms selection or setting. |
| Bleistiftsymbol | Edit function. |
| Mülleimer-Symbol | Löschfunktion. |
| 1 P1 to 9 P9 | Programmable Plans (P1-P9) selection. |
| Wecker-Symbol | Activates Alarm Clock settings. |
| 12/24 Uhr | Schaltet zwischen 12-Stunden- und 24-Stunden-Zeitformat um. |
| Uhrensymbol | Accesses Time Clock settings. |
| Helligkeitssymbol | Passt die Displayhelligkeit an. |
5. Einrichtung
5.1 Einlegen der Batterie
Für den Betrieb der Fernbedienung werden zwei (2) AAA-Batterien benötigt (nicht im Lieferumfang enthalten).
- Suchen Sie die Batteriefachabdeckung auf der Rückseite der Fernbedienung.
- Schieben Sie den Deckel nach unten oder drücken Sie den Riegel (falls vorhanden), um das Fach zu öffnen.
- Legen Sie zwei AAA-Batterien ein und achten Sie darauf, dass die Plus- (+) und Minus- (-) Anschlüsse mit den Markierungen im Inneren des Batteriefachs übereinstimmen.
- Bringen Sie die Abdeckung des Batteriefachs wieder an, bis sie sicher einrastet.
After battery installation, the remote is ready to be used with your LUCORB 15-inch gym timer.

Figure 5.1: The remote control being used to operate a LUCORB gym timer, demonstrating its intended function.
6. Bedienungsanleitung
Ensure the gym timer is powered on and within range of the remote control. Point the remote directly at the timer for optimal signal transmission.
6.1 Ein-/Ausschalten
- Drücken Sie die EIN/AUS (red power) button to turn the gym timer on or off.
6.2 Lautstärke und Helligkeit anpassen
- Drücken Sie die Lautsprechersymbol button to cycle through volume levels or mute the timer.
- Drücken Sie die Helligkeitssymbol button to adjust the display brightness of the gym timer.
6.3 Timer-Modi
Select the desired timer mode by pressing the corresponding button:
- DN (Countdown): Initiates a countdown from a set time. Use arrow keys to set time, then OK Und Abspielen/Pause.
- UP (Count Up): Starts counting upwards from zero. Press Abspielen/Pause Starten/Stoppen.
- ST (Stopwatch): Functions as a stopwatch. Press Abspielen/Pause Starten/Stoppen.
- TA (TABATA): Activates the TABATA interval protocol (e.g., 20s work, 10s rest, 8 rounds).
- HIIT (High-Intensity Interval Training): Engages HIIT specific interval settings.
- FGB1 / FGB2 (Fight Gone Bad): Selects pre-programmed Fight Gone Bad interval routines.
6.4 Allgemeine Bedienung
- 10 Sekunden: Press to add a 10-second preparation time before a workout begins.
- Musiknoten-Symbol: Cycles through available tone types for alerts and beeps.
- Loop Icon: Activates or deactivates the Loop Countdown (EMOM - Every Minute On the Minute) function.
- Play/Pause Icon: Starts, pauses, or resumes any active timer or program.
- Skip Icon: Adjusts the countdown time before the end of an interval or program.
- Arrow Keys (Up, Down, Left, Right): Used for navigation, adjusting values, or shifting between digits during setup.
- OK: Bestätigt die Auswahl oder speichert die Einstellungen.
- Pencil Icon (Edit): Enters edit mode for modifying timer settings or programmable plans.
- Trash Can Icon (Delete): Deletes selected settings or programmable plans.
6.5 Programmable Plans (P1-P9)
- The buttons labeled 1 P1 durch 9 P9 allow you to select and activate pre-saved or custom programmable workout plans.
- To program a plan, enter edit mode using the Bleistiftsymbol, configure your desired intervals, and then save it to one of the P1-P9 slots using the OK Taste.
6.6 Alarm Clock and Time Clock
- Drücken Sie die Wecker-Symbol to access and set alarm functions on the gym timer.
- Drücken Sie die Uhrensymbol Zu view or adjust the current time displayed on the gym timer.
- Verwenden Sie die 12/24 Uhr Taste zum Umschalten zwischen 12-Stunden- und 24-Stunden-Zeitformat.
7. Wartung
7.1 Reinigung
- Wischen Sie die Fernbedienung mit einem weichen, trockenen Tuch ab.
- Verwenden Sie keine Scheuermittel, Lösungsmittel oder chemische Sprays, da diese die Oberfläche oder interne Bauteile beschädigen können.
7.2 Batteriewechsel
- If the remote control's range decreases or it becomes unresponsive, replace the batteries as described in Section 5.1.
- Tauschen Sie immer beide Batterien gleichzeitig aus.
8. Fehlerbehebung
- Fernbedienung reagiert nicht:
- Prüfen Sie, ob die Batterien richtig eingelegt sind und ausreichend geladen sind. Tauschen Sie sie gegebenenfalls aus.
- Ensure there are no obstructions between the remote and the gym timer.
- Confirm the remote is pointed directly at the timer's receiver.
- Begrenzte Reichweite:
- Ersetzen Sie die Batterien durch neue.
- Stellen Sie sicher, dass keine starken Lichtquellen (wie z. B. direktes Sonnenlicht) das Infrarotsignal stören.
- Incorrect timer response:
- Verify that this remote is indeed for the LUCORB 15-inch gym timer and not another model or brand.
- Refer to your gym timer's specific instruction manual for detailed programming steps.
9. Spezifikationen
- Marke: LUCORB
- Modellnummer: 15
- Material: Plastik
- Farbe: Schwarz
- Produktabmessungen: 5.5 x 1.6 x 0.6 Zoll (13.97 x 4.06 x 1.52 cm)
- Artikelgewicht: 1.2 Unzen (34 Gramm)
- Akku-Typ: 2 x AAA (nicht enthalten)
10. Garantie und Support
For warranty information, technical support, or any inquiries regarding your LUCORB Gym Timer Remote Control, please contact LUCORB customer service through the official channels provided with your original product purchase or via the LUCORB brand store on Amazon.




