1. Einleitung
Thank you for choosing the OREiN 4500LM/30W Hardwired Motion Sensor LED Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Sicherheitshinweise
WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Installation must be performed by a qualified electrician or person familiar with the construction and operation of the product and the hazards involved.
- Sicherstellung der Versorgungsvoltage ist richtig (120 V Wechselstrom).
- Nicht in der Nähe von brennbaren Materialien installieren.
- Tragen Sie während der Installation Schutzbrille und Handschuhe.
- This fixture is designed for outdoor use and is IP65 waterproof rated.
3. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- Leuchte (1)
- Montagehalterung (1)
- Schrauben (verschiedene Größen)
- Drahtmuttern (3)
- Bedienungsanleitung (1)
4. Produktüberschreitungview
The OREiN Flood Light features three adjustable LED heads and a motion sensor for comprehensive outdoor illumination and security.
Abbildung 1: Vorderseite view of the OREiN 4500LM/30W Hardwired Motion Sensor LED Flood Light, showing the three adjustable light heads and the motion sensor below.
Figure 2: Diagram illustrating the flexible adjustment angles of the three light heads (340°) and the motion sensor (270° horizontally, 120° vertically).
5. Installation
This flood light is designed for hardwired installation on a standard junction box (2.75” / 3.5”). It supports both wall and eave mounting.
Installationsschritte:
- Strom ausschalten: Disconnect power at the circuit breaker before starting.
- Sichere Montagehalterung: Attach the metal mounting bracket to your existing junction box using the provided screws.
- Kabel anschließen: Connect the household wiring to the fixture wires using the provided wire nuts. Typically, black to black (live), white to white (neutral). This light belongs to secondary luminaires, so no extra ground wire connection is needed.
- Sichern Sie die Leuchte: Align the light fixture with the mounting bracket and secure it with the appropriate screws.
- Insert Waterproof Plug: Ensure the waterproof plug is properly inserted to prevent moisture ingress.
- Lichtköpfe und Sensor einstellen: Position the three light heads and the motion sensor to cover the desired areas.
- Strom wiederherstellen: Schalten Sie den Strom am Leistungsschalter wieder ein.
Figure 3: Step-by-step diagram for hardwired installation, showing mounting bracket, wire connections, and securing the fixture.
Abbildung 4: Bspamples of wall-mounted and soffit-mounted installations for the flood light.
6. Betriebsarten
The OREiN Flood Light offers three operational modes, selectable via a switch on the motion sensor unit:
- Testmodus: The light turns on for 5 seconds when motion is detected, regardless of ambient light. Useful for testing sensor coverage during installation.
- Dämmerungs- bis Morgengrauen-Modus (D2D): The light automatically turns on at night and off during the day. In this mode, the motion sensing function is inactive.
- Automatikmodus: The light turns on only at night when motion is detected. The duration the light stays on (1, 5, or 10 minutes) can be adjusted.
Figure 5: Visual representation of Test, Dusk to Dawn, and Auto modes in operation.
Figure 6: Illustration of the Dusk to Dawn mode, showing the light automatically activating when surroundings are dark and deactivating when bright.
7. Anpassen der Einstellungen
The motion sensor unit includes dials for adjusting the light's duration and sensitivity:
- Time Adjustment (Timer Minutes): Set the duration the light stays on after motion detection in Auto Mode (1, 5, or 10 minutes).
- Sensitivity Adjustment (Sensitivity): Adjust the motion detection range (10ft, 20ft, 30ft, 40ft). Max setting provides up to 40ft detection.
Figure 7: Close-up of the motion sensor with dials for adjusting mode, timer minutes, and sensitivity.
Video 1: Official OREiN video demonstrating the motion sensor outdoor lights, including features like wide detection, adjustable sensing distance, heat dissipation, adjustable time/sensitivity, flexible adjustment, and easy installation.
8. Wartung
- Reinigung: Reinigen Sie die Leuchte mit einem weichen,amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Inspektion: Periodically check for any damage to the wiring or housing.
- Lampenwechsel: The LED bulbs are integrated and not user-replaceable. The fixture has a lifespan of up to 50,000 hours.
Figure 8: Illustration demonstrating the IP65 waterproof rating, showing the light functioning reliably under rain.
Figure 9: Diagram showing the heat dissipation design of the light heads, contributing to the product's longevity.
9. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Keine Stromversorgung; falsche Verkabelung; falsche Sensoreinstellungen. | Check circuit breaker. Verify wiring connections. Adjust sensor mode/sensitivity. |
| Licht bleibt dauerhaft an. | Sensor in D2D mode; continuous motion detected; sensitivity too high. | Switch to Auto mode. Check for constant heat sources or movement in detection zone. Reduce sensitivity. |
| Das Licht wird tagsüber eingeschaltet. | Sensor in Test mode; ambient light sensor blocked. | Switch to Auto or D2D mode. Ensure the ambient light sensor is not obstructed. |
| Der Bewegungserkennungsbereich ist zu kurz/zu lang. | Die Empfindlichkeitseinstellung ist falsch. | Adjust the sensitivity dial on the motion sensor. |
10. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellname | OL3600354 |
| Marke | ORein |
| Helligkeit | 4500 Lumen |
| Wastage | 30 Watt |
| Farbtemperatur | 5000 Kelvin (Tageslicht) |
| Bandtage | 120 Volt |
| Material | Acrylnitril-Butadien-Styrol (ABS) |
| Wasserbeständigkeit | IP65 Wasserdicht |
| Bewegungserkennungswinkel | 240° |
| Bewegungserkennungsdistanz | Bis zu 40 Fuß |
| Lichtkopfeinstellung | 340°-Abdeckung |
| Geschätzte Lebensdauer | 50,000 Stunden |
| Installationstyp | Hardwired (Wall Mount, Eave Mount) |
| Technische Daten | 7.6 Zoll L x 8 Zoll B x 6 Zoll H |
| Artikelgewicht | 1.87 Pfund |
11. Garantie und Support
OREiN offers an extended warranty for this product. For specific warranty details, please refer to the product packaging or contact OREiN customer support.
Kundendienst:
- For assistance, contact OREiN directly through Amazon or search for the brand name online.
- If you encounter any issues, it is recommended to contact customer support before initiating a return.
Figure 10: Image representing OREiN customer support, available for assistance.
