Ensenior AQ1-10I-60K-02-BL-M01

Ensenior 1800LM Solar Flood Lights Outdoor with Motion Sensor

Model: AQ1-10I-60K-02-BL-M01

Einführung

Thank you for choosing the Ensenior 1800LM Solar Flood Lights. This manual provides essential information for the proper installation, operation, and maintenance of your solar security lights. Please read it thoroughly before use and retain it for future reference.

These solar-powered flood lights are designed for outdoor use, featuring a motion sensor, adjustable heads, and multiple operating modes to enhance security and illumination around your property.

Packungsinhalt

  • Ensenior Solar Flood Light Unit (2 units for 2-PACK)
  • Separate Solar Panel
  • Fernbedienung
  • Montagezubehör (Schrauben, Dübel)
  • Bedienungsanleitung

Setup und Installation

Proper installation is crucial for optimal performance. Ensure the solar panel receives direct sunlight for at least 6-8 hours daily.

1. Wählen Sie einen Standort

Select a mounting location for the light unit that provides the desired illumination coverage. The motion sensor has a 180° detection angle and up to 75ft sensing distance. The separate solar panel should be mounted in an area with maximum direct sunlight exposure.

Diagram showing the solar panel mounted separately from the light unit, connected by a long cable, illustrating flexible placement for optimal sun exposure.

The separate solar panel allows for flexible placement to maximize sun exposure, even if the light unit is in a shaded area.

2. Mounting the Light Unit

The light unit can be wall-mounted or right-angle mounted. Use the provided screws and anchors to securely fasten the light fixture to your chosen surface. The recommended installation height is 6.5-8.25 feet above the ground for a detection distance of up to 72 feet at 77 degrees Fahrenheit.

Two diagrams illustrating wall-mounted and right-angle mounted installation methods for the flood light unit.

Illustration of wall-mounted and right-angle mounted installation options.

3. Montage des Solarpanels

Mount the solar panel in a location that receives maximum direct sunlight throughout the day. Connect the solar panel cable to the input port on the light unit. The cable length is approximately 14.8 feet (4.5m), providing flexibility for placement.

Diagram showing the dimensions of the solar flood light and its separate solar panel, including the 14.8 ft cable length.

Product dimensions and solar panel cable length for installation planning.

4. Adjusting Light Heads and Sensor

The light features 3 adjustable heads and a 180° adjustable motion sensor. Adjust the light heads to cover the desired area (up to 270° beam angle). Position the motion sensor to optimize detection range and sensitivity.

Diagram illustrating the adjustable features of the light heads and motion sensor, showing various rotation and tilt angles.

Adjustable light heads and motion sensor for customized illumination and detection.

Bedienungsanleitung

Your Ensenior Solar Flood Light offers 5 distinct operating modes, controllable via the included remote or buttons on the light unit.

Betriebsarten:

  • Sicherheitsmodus: High brightness (1800 LM) flashes for 15 seconds when motion is detected, then stays on high brightness for 15 seconds before turning off.
  • Sensormodus: Turns on high brightness (1800 LM) for 30/60/120 seconds when motion is detected, then turns off after motion leaves.
  • Sensor Mode (ECO): Turns on medium brightness (240 LM) for 30/60/120 seconds when motion is detected, then turns off after motion leaves.
  • Dim to Sensor Mode (ECO): Stays on low brightness (12 LM) continuously, then turns to medium brightness (240 LM) for 30/60/120 seconds when motion is detected, and dims back to 12 LM after motion leaves.
  • Ein-Modus: Keeps the light on medium brightness (240 LM) for 4 hours continuously.
Diagram illustrating the 5 operating modes of the Ensenior solar flood light, including Security Mode, Sensor Mode, Sensor Mode (ECO), Dim to Sensor Mode (ECO), and On Mode.

Visual representation of the 5 distinct operating modes.

Bewegungssensoreinstellungen:

The motion sensor has adjustable sensitivity (Low, Medium, High) and duration (30s, 60s, 120s). Adjust these settings using the dials on the sensor unit or the remote control to suit your needs.

Diagram showing the motion sensor with adjustable sensitivity dials (L, M, H) and detection distances (30ft, 53ft, 75ft).

Adjustable motion sensor sensitivity and detection range.

Wartung

To ensure the longevity and optimal performance of your solar flood lights, follow these maintenance guidelines:

  • Solarpanel reinigen: Wischen Sie das Solarpanel regelmäßig mit einem weichen, fusselfreien Tuch ab.amp Mit einem Tuch Staub, Schmutz und Ablagerungen entfernen. Ein sauberes Panel gewährleistet effizientes Laden.
  • Verbindungen prüfen: Periodically inspect all cable connections between the solar panel and the light unit to ensure they are secure and free from corrosion.
  • Hindernisse beseitigen: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel or obstructing the motion sensor's field of view.
  • Batteriepflege: The integrated Lithium-Ion batteries are designed for long life. If the light's performance significantly degrades over time, the batteries may need replacement by a qualified technician.

Fehlerbehebung

If your Ensenior Solar Flood Light is not functioning as expected, refer to the following common issues and solutions:

ProblemMögliche UrsacheLösung
Das Licht geht nachts nicht an.Unzureichende Ladung der Solaranlage.Sorgen Sie dafür, dass das Solarpanel täglich 6–8 Stunden direktem Sonnenlicht ausgesetzt ist. Reinigen Sie die Oberfläche des Solarpanels.
Light stays on continuously or flashes.Incorrect mode setting or motion sensor sensitivity too high.Check the selected operating mode. Adjust motion sensor sensitivity to a lower setting. Ensure no constant motion is within the sensor's range.
Light is dim or has short illumination time.Niedriger Batteriestand oder verschmutztes Solarpanel.Allow the solar panel to charge fully in direct sunlight. Clean the solar panel.
Bewegungssensor erkennt keine Bewegung.Motion sensor obstructed or sensitivity too low.Clear any obstructions from the sensor. Increase motion sensor sensitivity. Ensure the sensor is pointed towards the desired detection area.

Technische Daten

BesonderheitDetail
MarkeSenior
ModellnummerAQ1-10I-60K-02-BL-M01
Helligkeit1800 Lumen (max.)
Farbtemperatur6500 Kelvin (Kaltweiß)
StromquelleSolarbetrieben
Batterie2 Lithium Ion batteries (2200mAh total, included)
WasserbeständigkeitIP65 Wasserdicht
Bewegungssensorwinkel180°
Bewegungssensor-EntfernungBis zu 75 Fuß
Abstrahlwinkel270° (Adjustable 3 heads)
KontrollmethodeFernbedienung, Druckknopf
MaterialAcrylnitril-Butadien-Styrol (ABS)
Technische Daten9.06 Zoll L x 7.4 Zoll B x 11.61 Zoll H
Länge des Solarpanelkabels14.8 Fuß (4.5 m)
ZertifizierungenFCC

Garantie und Support

Ensenior provides a 3 Jahr Garantie for this product. If you encounter any quality issues or require assistance, please do not hesitate to contact Ensenior customer service. We aim to provide prompt service within 12 hours.

For further support or to explore other Ensenior products, please visit the official Ensenior store or contact our customer service team.

Online-Hilfe: Visit the Ensenior Store on Amazon

Wichtige Sicherheitsinformationen

  • Das Produkt darf nicht zerlegt oder verändert werden.
  • Keep away from fire or high temperatures.
  • Ensure proper installation to prevent falling hazards.
  • Entsorgen Sie Batterien gemäß den örtlichen Vorschriften.

Zugehörige Dokumente - AQ1-10I-60K-02-BL-M01

Vorview Ensenior Solar Motion Activated Sicherheitslicht Benutzerhandbuch
Dieses Benutzerhandbuch enthält Anweisungen für das Ensenior Solar Motion Activated Security Light und behandelt Installation, Funktionen, Modi und häufig gestellte Fragen. Es beschreibt detailliert, wie Sie das Bewegungslicht, das Solarpanel und die Fernbedienung für eine optimale Leistung einrichten.
Vorview Ensenior LED-Einbauleuchten: Anleitung zur Fehlerbehebung und Benutzerhandbuch
Das Benutzerhandbuch von Ensenior enthält wichtige Schritte zur Fehlerbehebung für die 5/6 Zoll LED-Einbauleuchten. Es behandelt häufige Probleme wie nicht einschaltende Leuchten, Dimmprobleme, Flackern und Brummgeräusche. Erfahren Sie mehr über kompatible Dimmer, die korrekte Installation und kontaktieren Sie Ensenior für Support. Mit ETL-, Energy Star-, FCC- und ROHS-Zertifizierung.
Vorview Ensenior 52" Deckenventilator mit Licht und Fernbedienung Benutzerhandbuch
Umfassendes Benutzerhandbuch für den Ensenior 52"-Deckenventilator mit detaillierten Informationen zu Installation, Betrieb, Fehlerbehebung und Sicherheitshinweisen für die Modelle 52-335, 52-425 und 52-322.
Vorview Ensenior LED-Deckenleuchte – Benutzerhandbuch und Anleitung zur Fehlerbehebung
Ausführliches Benutzerhandbuch für Ensenior LED-Deckenleuchten. Es behandelt die Installation, die Behebung häufiger Probleme wie nicht leuchtende oder flackernde Lichter, Dimmerkompatibilität und Produktspezifikationen. Enthält Garantieinformationen und Kontaktinformationen zum Kundendienst.
Vorview Ensenior 52" Ceiling Fan with Light Remote Control User Manual
Comprehensive user manual for the Ensenior 52-inch ceiling fan with light and remote control. Includes detailed product information, safety instructions, installation guide, remote operation, troubleshooting, warranty, and contact details.
Vorview Ensenior LED-Deckenleuchte – Benutzerhandbuch und Anleitung zur Fehlerbehebung
Ausführliche Bedienungsanleitung für die ultradünnen LED-Einbauleuchten von Ensenior, inklusive Installationsanleitung, Fehlerbehebung, technischen Daten und Informationen zur Dimmerkompatibilität. Mit 5 Jahren Garantie und Kundensupport.