Produkt überview
The Keychron K10 Pro is a full-size (100% layout) custom wireless mechanical keyboard designed for versatility and performance. It features QMK/VIA support for extensive key remapping, dual wireless (Bluetooth 5.1) and wired (USB-C) connectivity, and a durable construction with pre-lubricated Keychron K Pro switches. This manual provides essential information for setting up, operating, and maintaining your K10 Pro keyboard.
Image: The Keychron K10 Pro keyboard, showcasing its full-size layout and design.
Hauptmerkmale:
- QMK/VIA Support: Fully programmable keys for custom layouts, macros, and shortcuts.
- Duale Konnektivität: Seamless switching between Bluetooth 5.1 (up to 3 devices) and USB-C wired mode.
- Pre-lubed Keychron K Pro Switches: Ensures a smooth and consistent typing experience.
- Verbessertes Tipperlebnis: Features sound-absorbing foam, a silicone bottom pad, and a steel plate for improved acoustics and feel.
- Weiße Hintergrundbeleuchtung: Offers 14 types of white backlight effects.
- Ergonomisches Design: Three levels of adjustable typing angles (5°, 9.2°, and 12°).
- Langlebige Tastenkappen: Double-shot PBT keycaps for longevity and resistance to shine.
Installationshandbuch
Packungsinhalt:
Bevor Sie beginnen, vergewissern Sie sich, dass alle Komponenten vorhanden sind:
- 1 Keychron K10 Pro Mechanical Keyboard
- 1 ABS Case
- 1 Hot-swap PCB
- 1 Steel Plate
- 1 Sound Absorbing Foam
- 1 Silicone Bottom Pad
- 7 Sets 2U Screw-In Stabilizers
- 1 Set 6.25U Screw-In Stabilizers
- 1 Typ-A auf Typ-C Kabel
Erstladung:
Connect the keyboard to a power source using the provided USB-C cable. The battery indicator will show charging status. A full charge can last up to 100 hours with the lowest backlight brightness.
Image: The Keychron K10 Pro keyboard highlighting its 4000mAh battery capacity.
Betriebssystemumschaltung:
Locate the OS switch on the side of the keyboard. Slide it to the appropriate position for your operating system (macOS or Windows/Linux). This ensures correct key mapping for your system.
Image: Close-up of the keyboard's side switch for macOS and Windows/Linux compatibility.
Konnektivitätsmodi:
The K10 Pro supports both wireless Bluetooth and wired USB-C connections.
- Bluetooth-Modus: Slide the mode switch to 'BT'. Press and hold 'Fn + 1' (or 'Fn + 2'/'Fn + 3') for 4 seconds to enter pairing mode. The key will flash rapidly. Suchen nach 'Keychron K10 Pro' on your device and connect.
- Kabelgebundener Modus: Slide the mode switch to 'Cable'. Connect the USB-C cable from the keyboard to your computer. The keyboard will automatically switch to wired mode.
Image: The Keychron K10 Pro keyboard shown with both Mac and Windows operating systems, indicating broad compatibility.
Bedienungsanleitung
Key Remapping with QMK/VIA:
The K10 Pro is fully programmable with QMK and VIA software. To remap keys or create macros:
- Download the VIA software from the Keychron official webWebsite.
- Connect the K10 Pro to your device using the USB-C cable (wired mode is required for remapping).
- Open the VIA software. The software should automatically detect your keyboard.
- Drag and drop desired keys or macro commands to remap any key. Changes are saved directly to the keyboard's firmware and will work in both wired and wireless modes.
Image: A screenshot of the VIA software interface, demonstrating its drag-and-drop functionality for key customization.
Steuerung der Hintergrundbeleuchtung:
The K10 Pro features 14 types of white backlight effects. Use the dedicated backlight key (usually located near the function row) or a combination of 'Fn' and other keys (refer to the keyboard's keycap legends) to cycle through effects and adjust brightness.
Bild: Eine Nahaufnahme view of the keyboard's switches illuminated by the white backlight.
Einstellbarer Tippwinkel:
Die Tastatur verfügt über zwei Tasten.tage adjustable feet, allowing for three different typing angles: 5°, 9.2°, and 12°. Adjust the feet to find your preferred ergonomic position.
Bild: Eine detaillierte view Die verstellbaren Füße der Tastatur veranschaulichen die verschiedenen Höheneinstellungen.
Wartung
Reinigung der Tastatur:
Um optimale Leistung und ein ansprechendes Aussehen zu erhalten, reinigen Sie Ihre Tastatur regelmäßig:
- Trennen Sie die Tastatur vom Computer.
- Verwenden Sie eine Dose Druckluft, um Staub und Schmutz zwischen den Tastenkappen zu entfernen.
- Wipe the keycaps and case with a soft, damp Tuch. Vermeiden Sie die Verwendung aggressiver Chemikalien oder scheuernder Materialien.
- For deeper cleaning, keycaps can be removed using a keycap puller.
Tastenkappen- und Schalteraustausch:
The K10 Pro features hot-swappable switches, allowing you to change switches without soldering. The double-shot PBT keycaps are also durable and can be replaced if desired.
- Entfernen der Tastenkappen: Use a keycap puller to gently lift keycaps straight up.
- Schalter entfernen: Use a switch puller to carefully remove the switch from the PCB. Ensure the keyboard is disconnected before attempting this.
- Einbau von Schaltern/Tastenkappen: Align the new switch/keycap with the socket/stem and press down gently until it clicks into place.
Bild: Eine Nahaufnahme view of the mechanical switches, showing their construction and hot-swappable nature.
Image: A detailed shot of the double-shot PBT keycaps, highlighting their texture and durability.
Fehlerbehebung
Verbindungsprobleme:
- Bluetooth stellt keine Verbindung her: Ensure the keyboard is in Bluetooth mode and in pairing mode (Fn + 1/2/3 for 4 seconds). Check your device's Bluetooth settings and try re-pairing.
- Kabelverbindung funktioniert nicht: Ensure the mode switch is set to 'Cable' and the USB-C cable is securely connected to both the keyboard and your computer. Try a different USB port or cable.
Key Remapping Not Applying:
- Remember that key remapping via VIA software requires the keyboard to be connected in kabelgebundener Modus during the remapping process. Once remapped, the changes will apply to both wired and wireless modes.
- Ensure you have the correct firmware and VIA JSON file loaded for your specific K10 Pro model.
Hintergrundbeleuchtung funktioniert nicht:
- Check if the backlight is simply turned off or set to the lowest brightness. Use the backlight control keys to adjust.
- Stellen Sie sicher, dass der Akku der Tastatur ausreichend geladen ist.
Technische Daten
| Modellnummer | K10P-A1 |
| Layout | 100% Full Size (108 Keys) |
| Konnektivität | Bluetooth 5.1 (Wireless), USB-C (Wired) |
| Schalter | Keychron K Pro Red (Linear), Hot-swappable |
| Tastenkappen | Doppelschuss-PBT |
| Hintergrundbeleuchtung | White LED (14 types) |
| Batterie | 4000 mAh Lithium Ion (up to 100 hours with lowest brightness) |
| Kompatibles Betriebssystem | macOS, Windows, Linux |
| Artikelgewicht | 3.72 Pfund |
| Verpackungsabmessungen | 18.58 x 7.44 x 2.13 Zoll |
Image: Detailed specifications for the Keychron K Pro Red (Linear) switch, including operating force, pre-travel, and total travel distance.
Garantie und Support
For warranty information, technical support, and frequently asked questions, please visit the official Keychron website. You can also find updated drivers and VIA software downloads there.
Offizieller Keychron WebWebsite: www.keychron.com
