Westcott 00529

Westcott iPoint® GEM Batterie-Bleistiftspitzer – Benutzerhandbuch

Modell: 00529

Einführung

The Westcott iPoint® GEM Battery Pencil Sharpener is designed for efficient and convenient pencil sharpening. Its compact size and battery operation make it ideal for desktop use in various settings. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your sharpener.

Westcott iPoint GEM Battery Pencil Sharpener, Blue

Front view of the Westcott iPoint® GEM Battery Pencil Sharpener in blue.

Aufstellen

Einlegen der Batterie

The Westcott iPoint® GEM Battery Pencil Sharpener requires 4 AA batteries (not included).

  1. Locate the battery compartment on the bottom of the sharpener.
  2. Öffnen Sie die Abdeckung des Batteriefachs.
  3. Legen Sie 4 AA-Batterien ein und achten Sie dabei auf die richtige Polarität (+/-), wie im Batteriefach angegeben.
  4. Schließen Sie den Batteriefachdeckel fest.
Zurück view of the Westcott iPoint GEM Battery Pencil Sharpener

Zurück view of the sharpener, showing the location of the battery compartment.

Bedienungsanleitung

Sharpening a Pencil

  1. Stellen Sie sicher, dass die Batterien richtig eingelegt sind.
  2. Hold the sharpener firmly on a flat surface. The sharpener has rubber grippers on the bottom for stability.
  3. Insert a standard-sized pencil into the sharpening hole at the top of the unit.
  4. Apply gentle downward pressure. The sharpener will automatically begin sharpening.
  5. Remove the pencil once it reaches the desired sharpness. The sharpener is designed to create a fine point. Avoid over-sharpening to prevent lead breakage.
Hand sharpening a pencil with the Westcott iPoint GEM sharpener

A hand inserting a pencil into the sharpener for sharpening.

Pencil inserted into the Westcott iPoint GEM sharpener

Close-up of a pencil inserted into the sharpening mechanism.

Emptying Shavings Reservoir

Die EZ-view shavings reservoir allows you to monitor the fill level.

  1. To empty, gently twist the top section of the sharpener counter-clockwise to detach it from the base.
  2. Die Bleistiftspäne vorsichtig in einen Abfalleimer entleeren.
  3. Realign the top section with the base and twist clockwise until it clicks securely into place.
Westcott iPoint GEM sharpener with top removed for emptying

The sharpener with its top section removed, revealing the shavings reservoir.

Wartung

To ensure the longevity and optimal performance of your Westcott iPoint® GEM Battery Pencil Sharpener, follow these maintenance guidelines:

Spitze view of the Westcott iPoint GEM sharpener showing the blade area

Spitze view of the sharpener, highlighting the sharpening mechanism and blade area.

Fehlerbehebung

ProblemMögliche UrsacheLösung
Der Anspitzer funktioniert nicht.
  • Defekte oder falsch eingesetzte Batterien.
  • Shavings reservoir is full or improperly seated.
  • Batterien prüfen und ersetzen, auf richtige Polarität achten.
  • Empty reservoir and ensure it is securely reattached.
Pencil does not sharpen effectively.
  • Stumpfe Klingen.
  • Pencil lead is broken inside.
  • Improper pencil insertion.
  • Blades are not user-replaceable; consider product replacement if severely dull.
  • Try inserting a different pencil or gently rotating the current one to dislodge broken lead.
  • Ensure pencil is inserted straight and with gentle pressure.
Motor feels hot during use.
  • Längerer, kontinuierlicher Gebrauch.
  • Excessive pressure on the pencil.
  • Allow the sharpener to cool down between uses.
  • Use only gentle pressure when sharpening.

Technische Daten

Garantie und Support

This Westcott iPoint® GEM Battery Pencil Sharpener comes with a one-year manufacturer's warranty. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Westcott webWebsite.

For more information about Westcott products, visit the Westcott Store on Amazon.

Zugehörige Dokumente - 00529

Vorview Westcott iPoint Evolution Outer Casing Ersatzleitfaden
Step-by-step instructions for replacing the outer casing of the Westcott iPoint Evolution pencil sharpener. Learn how to disassemble and reassemble your device.
Vorview Westcott ClickBox Quick Start Guide and Warranty Information
A comprehensive guide to setting up, assembling, using, and maintaining the Westcott ClickBox softbox, including detailed instructions, component overview, warnings, and warranty terms.
Vorview Westcott u60-B LED Light Quick Start Guide & Setup Instructions
Get started with your Westcott u60-B LED Light. This guide provides setup, operation, assembly, and warranty information for the u60-B light and its modifiers.
Vorview Anleitung zum Firmware-Update für den Westcott FJ80
Detaillierte Anleitung zum Aktualisieren der Firmware Ihres Westcott FJ80 Blitzgeräts. Diese Anleitung umfasst das Herunterladen der neuesten Firmware, den Installationsprozess und wichtige Tipps zur Fehlerbehebung, um eine optimale Leistung zu gewährleisten.
Vorview Westcott Solix LED – Kurzanleitung und Produktinformationen
Eine umfassende Anleitung zur Einrichtung, Verwendung und Wartung der Westcott Solix LED-Leuchte. Enthält Details zu Lieferumfang, Einrichtungshinweisen, Verwendung, Modifikationsmöglichkeiten, Batteriebetrieb, Pflege und Aufbewahrung sowie Garantieinformationen.
Vorview Westcott FJ-X3 Wireless Trigger – Kurzanleitung
Kurzanleitung für den Westcott FJ-X3 Wireless Trigger (Modelle M und S). Behandelt Einrichtung, Bedienelemente, LCD-Display, Kameravorbereitung, Laden, Ein-/Ausschalten, Testfeuer, Einstellungssperre, Batteriewechsel, Montage, Firmware-Updates und Garantieinformationen.