Einführung
This manual provides comprehensive instructions for the safe and efficient operation and maintenance of your Gre RBR120 Wet Runner Xpert cordless robotic pool cleaner. Please read this manual thoroughly before using the product and retain it for future reference.
The Gre RBR120 Wet Runner Xpert is designed for cleaning the bottom of above-ground and in-ground pools up to 12 x 5 meters (60 m²). It is suitable for pools with flat bottoms and a maximum floor inclination of 15%.
Wichtige Sicherheitsinformationen
- Always ensure the robot is fully charged before use.
- Do not operate the robot if the charging port or battery compartment is damaged.
- Halten Sie Kinder und Haustiere vom Poolbereich fern, solange der Roboter in Betrieb ist.
- Verwenden Sie ausschließlich das mit dem Gerät gelieferte Original-Ladegerät.
- Do not attempt to open or repair the robot yourself. Contact qualified service personnel.
- Remove the robot from the pool before adding chemicals or performing maintenance.
- Bewahren Sie den Roboter an einem kühlen, trockenen Ort auf, wenn Sie ihn nicht verwenden.
Packungsinhalt
Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:
- Gre RBR120 Wet Runner Xpert Robotic Pool Cleaner
- Ladekabel
- Particle Filter (pre-installed or additional)
- Bergungshaken
- Benutzerhandbuch (dieses Dokument)
Produkt überview
The Gre RBR120 Wet Runner Xpert is a compact and efficient cordless pool cleaner. Key components include:
- Haupteinheit: Houses the motor, battery, and control system.
- Räder: For movement across the pool floor.
- Brushes/Cleaning Mechanism: To dislodge debris.
- Filterfach: Sammelt Schutt.
- Ladeanschluss: Zum Anschließen des Ladegeräts.
- Flaps/Fins: Assist with navigation and debris collection.
Figure 1: Gre RBR120 Wet Runner Xpert robotic pool cleaner on a wooden pool deck. This image provides an overall view of the robot's design and placement near a pool.
Abbildung 2: Oben view of the robot's filter compartment. This image highlights the transparent cover and the internal filter basket where debris is collected.
Abbildung 3: Ausführlich view of the robot's cleaning brushes. These brushes are designed to scrub the pool surface and dislodge dirt for effective cleaning.
Aufstellen
1. Erstes Aufladen
Before first use, fully charge the robot. Connect the charging cable to the robot's charging port and then to a power outlet. The charging indicator light will illuminate. A full charge takes approximately 8 hours. Disconnect the charger once charging is complete.
2. Filter Installation (if not pre-installed)
Open the filter compartment and ensure the particle filter is correctly seated. Close the compartment securely.
Bedienungsanleitung
1. Platzieren des Roboters im Pool
Gently lower the robot into the pool. Ensure it sinks to the bottom and is fully submerged before activation. Avoid dropping it into the water.
Figure 4: The robotic pool cleaner submerged in water. This image demonstrates the robot in its operational environment, actively cleaning the pool bottom.
2. Activating the Robot
Press the power button (control method: touch) on the robot to start the cleaning cycle. The robot will begin its autonomous cleaning path across the pool floor.
3. Reinigungszyklus
The robot operates for approximately 120 minutes on a full charge. It will automatically shut off once the cycle is complete or the battery is depleted.
4. Retrieving the Robot
Once the cleaning cycle is finished, use the provided retrieval hook to carefully lift the robot out of the water. Allow excess water to drain before removing it completely.
Wartung
1. Reinigung des Filters
After each use, or when the filter appears dirty, remove the filter from its compartment. Rinse the filter thoroughly with a garden hose to remove all collected debris. Ensure the filter is clean before re-installing it.
2. Allgemeine Reinigung
Wischen Sie die Außenseite des Roboters mit einem weichen, fusselfreien Tuch ab.amp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
3. Speicherung
When not in use for extended periods, store the robot in a cool, dry, and shaded area. Ensure the battery is charged before storage to prolong its lifespan.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Roboter startet nicht. | Der Akku ist schwach oder leer. | Charge the robot for 8 hours. |
| Robot moves slowly or inefficiently. | Der Filter ist mit Ablagerungen verstopft. | Clean the particle filter thoroughly. |
| Robot does not cover the entire pool. | Battery life is insufficient for pool size; pool floor inclination exceeds 15%. | Ensure full charge; verify pool floor is flat or within 15% inclination. |
| Debris is not being collected. | Filter is improperly installed or damaged. | Check filter installation; replace if damaged. |
Technische Daten
- Modell: Gre RBR120 Wet Runner Xpert
- Pooltyp: Above-ground and In-ground pools
- Maximum Pool Size: Up to 12 x 5 meters (60 m²)
- Pool Floor Type: Flat bottom (max. 15% inclination)
- Energiequelle: Wiederaufladbarer Lithium-Ionen-Akku
- Batteriekapazität: 13000 mAh
- Betriebsautonomie: Ungefähr 120 Minuten
- Ladezeit: Ungefähr 8 Stunden
- Artikelgewicht: 6.4 Kilogramm
- Enthaltene Komponenten: Robotic cleaner, particle filter, retrieval hook, charger
- Kontrollmethode: Berühren
- Material: Langlebige Kunststoff- und Metallkomponenten
- Ursprungsland: China
Garantie und Support
Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen Website des Herstellers. webBesuchen Sie unsere Website oder kontaktieren Sie Ihren Händler. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
