Einführung
Thank you for choosing the Aigostar Solar Outdoor Light. This manual provides essential information for the safe and efficient operation of your solar light. Please read it thoroughly before installation and use, and retain it for future reference.
This 50W LED solar light features a motion sensor, remote control, IP65 waterproof rating, and adjustable color temperature. It is designed for outdoor use, providing illumination for gardens, fences, and other outdoor areas.
Wichtige Sicherheitshinweise
- Stellen Sie sicher, dass das Solarpanel an einem Ort installiert wird, der direktes Sonnenlicht erhält, um eine optimale Ladung zu gewährleisten.
- Do not attempt to disassemble or modify the product. This may cause damage and void the warranty.
- Halten Sie das Produkt von Feuer und hohen Temperaturen fern.
- The product is IP65 waterproof, suitable for outdoor use, but avoid submerging it in water.
- Handle the remote control with care.
- Entsorgen Sie Batterien gemäß den örtlichen Vorschriften.
Packungsinhalt
Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:
- Solar Outdoor Light unit
- Solarmodul mit 3 Meter Kabel
- Fernbedienung
- Universal wheel (for angle adjustment)
- Montagezubehör (Schrauben, Dübel)
Produkt überview
The Aigostar Solar Outdoor Light consists of a solar panel and a lamp unit connected by a 3-meter cable.

Abbildung 1: Produktkomponenten und Abmessungen. This image illustrates the solar panel (175mm x 175mm), the 2.8-meter connecting cable, and the lamp unit (175mm diameter, 63mm height) with a 0.2-meter cable from the lamp to its mounting point.
Setup und Installation
The solar light offers two installation options: as a suspended light or a wall-mounted light. Choose the method that best suits your needs.
1. Platzierung der Solarmodule
The solar panel must be installed in a location that receives maximum direct sunlight throughout the day to ensure efficient charging of the 5000 mAh lithium-ion battery. A full charge takes 4-6 hours and provides up to 12 hours of illumination.
2. Lamp Geräteinstallation
Die lamp unit can be installed as a pendant light or a wall sconce. Use the provided universal wheel to adjust the lighting angle as required. The 3-meter cable allows flexible placement of the lamp unit relative to the solar panel.

Figure 2: Two Installation Methods. The left side shows the lamp unit wall-mounted, while the right side shows it suspended from a pergola. A brightness adjustment bar is also visible, indicating adjustable light output.
Wandhalterung: Sichern Sie das lamp unit to a wall using appropriate screws and anchors. Ensure the universal wheel is tightened after adjusting the angle.
Suspended Mount: Hänge das lamp unit from a suitable overhead structure. The cable length provides flexibility for placement.
Bedienungsanleitung
The Aigostar Solar Outdoor Light is controlled via the included remote control. The remote has a range of up to 6 meters.
Fernbedienungsfunktionen:

Abbildung 3: Fernsteuerung überview. This image displays the remote control with buttons for power, sensing modes (M1, M2, M3), color temperature (3000K, 4000K, 6500K), brightness levels (25%, 50%, 100%), and timer settings (3H, 5H, 8H, Time Off).
- EIN/AUS: Press to turn the light on or off manually.
- Sensing Modes:
- M1 (Dim Light after people leave): The light stays dim and brightens to full intensity when motion is detected. It returns to dim after motion ceases.
- M2 (Turn off the lights after people leave): The light remains off and turns on to full intensity when motion is detected. It turns off completely after motion ceases.
- M3 (Automatically lights up after dark): The light automatically turns on at a set brightness after dark, without motion detection.
- Anpassung der Farbtemperatur: Wählen Sie zwischen 3000K (Warmweiß), 4000K (Neutralweiß) und 6500K (Kaltweiß).
- Helligkeitsanpassung: Set the brightness to 25%, 50%, or 100%.
- Zeitmessung (Timer): Set the light to operate for 3 hours, 5 hours, or 8 hours. "Time Off" cancels the timer.
Funktionsweise des Bewegungssensors:
The motion sensor has a 360° detection angle and a range of 8-10 meters. It activates the light based on the selected sensing mode.

Figure 4: Motion Sensor Modes. This image visually explains the three sensing modes: Dim Sensor Light Mode (M1) where the light is dim and brightens upon motion, Sensor Light Mode (M2) where the light is off and turns on upon motion, and Smart Light Mode (M3) which provides automatic illumination after dark.
Wartung
- Reinigung: Wischen Sie das Solarpanel regelmäßig mit einem weichen, fusselfreien Tuch ab.amp Mit einem Tuch Staub, Schmutz oder Ablagerungen entfernen. Ein sauberes Panel gewährleistet optimale Ladeeffizienz.
- Batterie: The integrated lithium-ion battery is designed for long-term use. No user maintenance is required for the battery itself. Ensure the solar panel receives sufficient sunlight daily.
- Umgebungsbedingungen: The IP65 rating ensures protection against dust and water jets. The light is designed to withstand extreme weather conditions from -30°C to 85°C.

Abbildung 5: Witterungsbeständigkeit. This image demonstrates the product's durability in diverse weather, including rain, bright sun, and snow, emphasizing its IP65 waterproof rating and ability to operate between -30°C and 85°C.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nachts nicht an. | Unzureichende Ladung der Solaranlage. | Stellen Sie sicher, dass das Solarpanel täglich 4–6 Stunden direktem Sonnenlicht ausgesetzt ist. Reinigen Sie die Oberfläche des Solarpanels. |
| Bewegungssensor funktioniert nicht. | Incorrect sensing mode selected or obstruction. | Check remote control settings (M1, M2). Ensure no obstructions are blocking the sensor. |
| Fernbedienung reagiert nicht. | Remote battery depleted or out of range. | Replace the remote control battery. Ensure you are within the 6-meter operating range. |
| Die Lichtleistung ist schwach. | Low battery charge or brightness setting. | Allow the solar panel to charge fully. Adjust brightness to 50% or 100% using the remote. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | Aigostar |
| Modellnummer | SSP-Microwave Sensor-G |
| Leistung | 50W LED |
| Lichtstrom | 500 Lumen |
| Farbtemperatur | Adjustable: 3000K / 4000K / 6500K |
| Batteriekapazität | 5000 mAh Lithium-Ionen- |
| Ladezeit | 4-6 Stunden (direktes Sonnenlicht) |
| Beleuchtungsdauer | Bis zu 12 Stunden (bei voller Ladung) |
| Bewegungssensorwinkel | 360° |
| Bewegungssensor-Entfernung | 8-10 Meter |
| Reichweite der Fernbedienung | 6 Meter |
| Cable Length (Solar Panel to Lamp) | 3 Meter |
| Wasserdichtigkeit | IP65 |
| Material | Plastik |
| Produktabmessungen (L x B x H) | 18.5 x 19.5 x 11.5 cm |
| Artikelgewicht | 620 Gramm |
| Installationstyp | Wall mount, Suspended mount |
Garantie und Support
For warranty information and customer support, please refer to the purchase platform or contact Aigostar customer service directly. Details regarding spare parts availability and software updates are not provided in the product specifications.
Weitere Hilfe finden Sie auf der offiziellen Aigostar-Website. webWebsite oder wenden Sie sich an Ihren Händler.





