1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your NOVOSTELLA NTA22 LED Security Light. Designed for outdoor use, this 45W, 5000lm, 5000K LED floodlight features a motion sensor, remote control, and adjustable heads, offering reliable and efficient illumination for various outdoor areas.
2. Sicherheitshinweise
Please read and understand all instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Vor der Installation oder Wartung der Leuchte muss immer die Stromzufuhr am Sicherungsautomaten unterbrochen werden.
- Ensure proper grounding to avoid potential electrical hazards.
- Ziehen Sie einen qualifizierten Elektriker zu Rate, wenn Sie sich bei irgendeinem Teil der Installation unsicher sind.
- Nehmen Sie keine Veränderungen an der Leuchte vor. Jegliche Veränderungen können zum Erlöschen der Garantie und zu Sicherheitsrisiken führen.
- This product is rated for 120V AC. Ensure your power supply matches this requirement.
3. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- 2 × LED Security Lights
- 2 × Schrauben
- 3 × Wire Connectors
- 1 × Mounting Bolt
- 1 × Montagehalterung
- 1 × Gasket
- 1 × Rubber Plug
- 1 × IR Remote Control (with 1 CR2 battery included)
4. Produktmerkmale
- IR-Fernbedienung: Easily adjust settings such as sensor mode, hold time, luminance detection, and sensor sensitivity without needing to access the physical unit.
- Motion Sensor Mode (PIR): Activates the light to 100% brightness when motion is detected within a 60ft range.
- Motion Sensor Mode (DIM): Activates the light to 100% brightness upon motion detection, then dims to 20% brightness after motion ceases.
- Dusk to Dawn-Modus: Automatically turns the light ON at dusk and OFF at dawn. Motion detection is inactive in this mode.
- Immer eingeschalteter Modus: Allows the light to function as a standard light, controlled manually via the IR remote. Motion detection is inactive in this mode.
- Hohe Helligkeit und Energieeffizienz: 45W LED provides 5000 lumens of 5000K daylight, equivalent to a 400W incandescent fixture, saving over 80% in energy costs.
- Einstellbares Design: Features 3 adjustable heads and a movable sensor to customize illumination and detection areas.
- IP65 Wasserdicht: Durable construction ensures safety and longevity for outdoor use in various weather conditions.
5. Installationsanleitung
Follow these steps for a secure and functional installation. It is recommended to watch the installation video for visual guidance.
5.1 Vorinstallation
- Vor Beginn der Arbeiten die Stromzufuhr am Sicherungsautomaten unterbrechen.
- Stellen Sie sicher, dass die Montagefläche stabil ist und das Gewicht der Vorrichtung tragen kann.
- Benötigte Werkzeuge bereithalten: Schraubendreher, Abisolierzange, Isolierband (optional).
5.2 Montage des Geräts
- Attach the mounting bracket to your electrical box using the provided screws. Ensure it is securely fastened.
- Schließen Sie die Kabel an:
- Connect the white wire from the fixture to the white (neutral) wire from your electrical box using a wire connector.
- Connect the black wire from the fixture to the black (live) wire from your electrical box using a wire connector.
- Connect the green (ground) wire from the fixture to the ground wire from your electrical box.
- Carefully push the connected wires into the electrical box.
- Align the fixture with the mounting bracket and secure it with the mounting bolt. Ensure the gasket and rubber plug are properly seated for weatherproofing.
- Adjust the light heads and motion sensor to your desired angles.
Image: Securely attach the mounting bracket to the electrical box.
Image: Connect the white, black, and ground wires using wire connectors.
Image: The adjustable light heads and motion sensor allow for customized coverage.
5.3 Installationsvideo
For a visual walkthrough of the installation process, please refer to the official product video below:
Video: Official installation and feature overview for NOVOSTELLA Security Lights. This video demonstrates the wiring and mounting process, as well as the various operational modes and remote control functions.
6. Bedienungsanleitung
The NOVOSTELLA NTA22 LED Security Light is controlled using the included IR remote. Aim the remote directly at the motion sensor for optimal response. Ensure no obstacles are between the remote and the sensor. A distance within 16ft is recommended.
6.1 Fernbedienungsfunktionen
Image: The IR remote control allows for easy adjustment of light settings.
- EIN/AUS: Das Licht manuell ein- oder ausschalten.
- D2D (Dusk to Dawn): Activates Dusk to Dawn mode. The light turns on automatically at dusk and off at dawn. Motion detection is disabled.
- PIR (Motion Sensor - 100% Brightness): Activates motion sensor mode. When motion is detected, the light turns on at 100% brightness.
- DIM (Motion Sensor - 20% Dim): Activates motion sensor mode. When motion is detected, the light turns on at 100% brightness, then dims to 20% brightness after motion ceases.
- HOLD TIME (10s, 1min, 5min, 10min): Sets how long the light remains at full brightness after motion is detected and then ceases.
- LUX (DAY, NIGHT): Adjusts the ambient light level at which the motion sensor becomes active.
- TAG: Motion sensor is active during both day and night.
- NACHT: Motion sensor is active only when ambient light is low (at night).
- SENS (LOW, HIGH): Adjusts the sensitivity of the motion sensor.
- NIEDRIG: Reduced sensitivity, detects motion at closer distances.
- HOCH: Increased sensitivity, detects motion at longer distances (up to 60ft).
6.2 Understanding Modes
Image: Illustration of Dusk to Dawn (Auto ON/OFF) and Manual ON/OFF modes. Motion detection is not active in these modes.
Image: Comparison of PIR mode (100% brightness on motion) and DIM mode (100% on motion, then 20% dim).
7. Wartung
Regelmäßige Wartung gewährleistet optimale Leistung und Langlebigkeit Ihrer Sicherheitsbeleuchtung.
- Reinigung: Periodically wipe the light fixture and sensor lens with a soft, damp Verwenden Sie ein Tuch, um Schmutz, Staub oder Ablagerungen zu entfernen. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
- Inspektion: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections.
- Sensorbereich: Keep the area around the motion sensor clear of obstructions (e.g., tree branches, tall plants) that could interfere with its detection capabilities.
8. Fehlerbehebung
If you encounter issues with your NOVOSTELLA NTA22 LED Security Light, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | No power, loose wiring, incorrect mode setting, faulty sensor. | Check circuit breaker. Verify all wire connections are secure. Ensure the remote is set to a motion-activated mode (PIR or DIM) or D2D mode at night. Test the sensor sensitivity. |
| Licht bleibt dauerhaft an. | Continuous motion, incorrect mode setting, sensor malfunction. | Ensure no constant motion in the detection area. Check if the light is set to "Always ON" mode. If in motion sensor mode, try adjusting sensor sensitivity (SENS LOW) or hold time. |
| Licht blinkt oder flackert. | Unstable power supply, loose connection, incompatible dimmer (not dimmable via wall switch). | Verify stable power. Check wiring connections. This fixture is not designed for use with external dimmer switches. |
| Bewegungssensor erkennt nicht. | Obstruction, incorrect sensitivity, LUX setting, sensor angle. | Clear obstructions. Set SENS to HIGH. Ensure LUX is set to DAY or NIGHT as appropriate. Adjust the sensor angle to cover the desired area. |
| Fernbedienung funktioniert nicht. | Battery dead, remote out of range, obstruction. | Replace the CR2 battery in the remote. Ensure you are within 16ft and aiming directly at the sensor without obstructions. |
9. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | NOVOSTELLA |
| Modellname | NTA22 (LED Security Light) |
| Stromquelle | Kabelgebundene Elektrik |
| Bandtage | 120 Volt (Wechselstrom) |
| Wastage | 45 Watt |
| Helligkeit | 5000 Lumen |
| Farbtemperatur | 5000 Kelvin (Tageslichtweiß) |
| Lichtquellentyp | LED |
| Material | Acrylnitril-Butadien-Styrol, Kunststoff |
| Verwendung im Innen- und Außenbereich | Im Freien |
| Wasserbeständigkeit | IP65 Wasserdicht |
| Kontrollmethode | Fernbedienung |
| Schaltertyp | Remote, Motion Sensor |
| Reichweite des Bewegungssensors | Bis zu 60 Fuß |
| Bewegungssensorwinkel | 180° |
| Technische Daten | 8 Zoll L x 6 Zoll B x 13 Zoll H |
| Artikelgewicht | 3.34 Pfund |
| Batterien erforderlich | Yes (1 CR2 battery for remote, included) |
10. Garantieinformationen
This NOVOSTELLA LED Security Light comes with a 2 Jahr Garantie Ab Kaufdatum. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf. Die Garantie deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab.
11. Kundendienst
For further assistance, technical support, or to explore other NOVOSTELLA products, please visit the official NOVOSTELLA store:
