PAL 120W Multi Color Dual Zone Remote Control Transformer Instruction Manual

1. Einleitung

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.

2. Sicherheitshinweise

WARNUNG: Die Nichtbeachtung dieser Sicherheitshinweise kann zu Bränden, Stromschlägen, Verletzungen oder Schäden am Produkt oder am Eigentum führen.

• Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
• Die Installation muss von einem qualifizierten Elektriker und in Übereinstimmung mit allen lokalen und nationalen Elektrovorschriften durchgeführt werden.
• Do not operate the transformer if it has been damaged in any way.
• Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
• Überprüfen Sie, ob die Versorgungsspannungtage matches the transformer's specified input voltage (100-240V AC, 50/60Hz).
• Do not exceed the maximum output power of 120 Watts.

3. Packungsinhalt

Please verify that all items listed below are present and undamaged in your package:

• 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
• 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
• 2 x AAA-Batterien (für die Fernbedienung)

Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.

4. Produktüberschreitungview

4.1. Transformer Unit (64-PCR-3D-120)

The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:

• Eingangslautstärketage: 100-240 V Wechselstrom, 50/60 Hz
• Versorgungsspannung: 125 Watt
• Ausgangsleistung: 120 Watts (24V DC)
• IP-Schutzart: IP65 (staubdicht und gegen Strahlwasser geschützt)
• Zertifizierungen: CE, SELV

4.2. PCZ-2 Color Touch 2 Zone Remote Control

The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.

5. Einrichtung und Installation

Before beginning installation, ensure all power is disconnected at the main circuit breaker.

1. Montage: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
2. Eingangsverkabelung: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
3. Ausgangsbeschaltung: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
4. Batterien der Fernbedienung: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
5. Einschalten: Sobald alle Verbindungen sicher und überprüft sind, stellen Sie die Stromversorgung am Leistungsschalter wieder her.

6. Bedienungsanleitung

6.1. Koppeln der Fernbedienung

The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:

1. Stellen Sie sicher, dass der Transformator eingeschaltet ist.
2. Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
3. Repeat for 'Zone 2 ON' button if you wish to pair the second zone.

6.2. Grundlegende Fernbedienungsfunktionen

• Ein-/Ausschalten: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
• Farbauswahl: Use the color touch wheel to select desired static colors.
• Helligkeitsregelung: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
• Modusauswahl: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
• Zonensteuerung: Independently control Zone 1 and Zone 2 using their respective buttons.

7. Wartung

• Reinigung: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Inspektion: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
• Batteriewechsel: Replace the AAA batteries in the remote control when its performance degrades or it stops responding.

8. Fehlerbehebung

9. Spezifikationen

10. Garantie und Support

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's webStandort oder Produktverpackung.