Einführung
Thank you for choosing the RESTMO Sprinkler Timer with Brass Inlet. This programmable water timer is designed to simplify your garden watering tasks, providing automatic control for garden hoses, outdoor faucets, drip irrigation systems, and lawn watering. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.
Bild: Vorderseite view of the RESTMO Sprinkler Timer, showing the digital display and control dial.
Sicherheitshinweise
- Do not immerse the timer in water. It is IP54 waterproof, meaning it is protected against dust and splashing water, but not full immersion.
- Use only 2 x AAA 1.5V alkaline batteries (not included). Do not mix old and new batteries or different types of batteries.
- Um ein Auslaufen zu verhindern, sollten die Batterien entfernt werden, wenn der Timer längere Zeit nicht benutzt wird.
- Protect the timer from freezing temperatures. Disconnect and store indoors during winter.
- Ensure all connections are tight to prevent leaks. Teflon tape is recommended for a secure seal.
Produkt überview
The RESTMO Sprinkler Timer features a user-friendly design with a large LCD screen and intuitive controls.
Image: Diagram illustrating the various components of the sprinkler timer, including the brass inlet, LCD screen, control dial, and buttons.
Schlüsselkomponenten:
- Pure Brass Inlet Thread: 360-degree rotatable for easy installation, with a built-in metal filter washer to prevent debris.
- Großer LCD-Bildschirm: Displays current time, next watering time, and battery status.
- Timer-Einstellrad: Used to select different settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF).
- OK/Manuell-Taste: Confirms settings and activates manual watering.
- +/- Tasten: Adjust values and activate rain delay.
- Waterproof Battery Compartment: Houses 2 x AAA batteries.
Bild: Nahaufnahme view of the 360-degree swivel pure brass inlet, highlighting its design and durability.
Setup und Installation
Follow these steps to install your RESTMO Sprinkler Timer:
Image: Four-panel diagram showing the installation process: installing batteries, attaching to faucet, attaching hose, and setting the program.
- Batterien installieren: Open the waterproof battery compartment. Insert 2 x AAA 1.5V alkaline batteries (not included), ensuring correct polarity. Close the compartment securely. Keep your hands dry during this process.
- An den Wasserhahn anbringen: Screw the timer's brass inlet onto your 3/4" outdoor faucet. Hand-tighten firmly. For a leak-proof connection, wrap Teflon tape around the faucet threads before attaching the timer.
- Schlauch anbringen: Connect your garden hose to the 3/4" hose connection at the bottom of the timer. Ensure it is tightly secured.
- Turn on Faucet: Open your faucet fully. The timer is designed to operate under water pressure.
Bedienungsanleitung
1. Uhr einstellen
This step sets the current time on the timer.
- Drehen Sie das Zifferblatt auf UHR EINSTELLEN.
- Drücken Sie die +/- Tasten zum Einstellen der aktuellen Stunde und Minute.
- Drücken Sie die OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
2. Set Start Time
This sets when your automatic watering program will begin.
- Drehen Sie das Zifferblatt auf STARTZEIT.
- Drücken Sie die +/- -Tasten, um die gewünschte Startzeit einzustellen.
- Drücken Sie die OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
3. Set Watering Duration (How Long)
This sets how long the watering will last for each cycle.
- Drehen Sie das Zifferblatt auf WIE LANGE.
- Drücken Sie die +/- buttons to set the watering duration from 1 minute to 239 minutes.
- Drücken Sie die OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
4. Set Watering Frequency (How Often)
This sets how often the watering cycles will repeat.
- Drehen Sie das Zifferblatt auf WIE OFT.
- Drücken Sie die +/- buttons to set the watering frequency: from 1 hour to 12 hours, or from 1 day to 7 days.
- Drücken Sie die OK button to switch between hour and day/hour setup.
- Turn the dial to any other position to save changes.
Image: Visual guide showing the range for 'How Long' (1-239 mins) and 'How Often' (1hr-7 days) settings.
5. Automatic Watering
Once programmed, turn the dial to ON to activate the automatic watering schedule. The LCD screen will display the remaining time of the current watering program when watering is active. When watering is off, the screen will flash between the next watering start time and the current time.
Image: Depicts the timer set to 'ON' for automatic watering, with a visual representation of the watering duration and frequency settings.
6. Manuelle Bewässerung
Manuelles Bewässern ohne Beeinträchtigung Ihres programmierten Bewässerungsplans:
- With the dial at ON, lange drücken OK/MANUELL -Taste 3 Sekunden lang gedrückt.
- Drücken Sie die +/- buttons to select the desired manual watering duration (1 to 239 minutes).
- Drücken OK to switch between hour and minute. The setup flashes 3 times and manual watering will automatically start.
- To cancel manual watering, turn the dial to AUS und dann zurück zu ON.
Image: Shows how to activate manual watering and adjust its duration, with a visual of water flowing from the hose.
7. Regenverzögerung
To temporarily pause your watering schedule due to rain or other reasons:
- With the dial at ON, lange drücken DELAY + -Taste 3 Sekunden lang gedrückt.
- Drücken Sie die +/- buttons to select a delay of 12, 24, 48, or 72 hours.
- Drücken OK or wait for 3 seconds to start the rain delay.
- To cancel rain delay, turn the dial to AUS und dann zurück zu ON.
Image: Illustrates the rain delay function with options for 12, 24, 48, and 72-hour delays.
8. Stop Watering
To completely stop all watering programs:
- Drehen Sie das Zifferblatt auf AUS. The timer will keep off until the dial is turned to ON wieder.
Image: Shows the timer dial set to 'OFF', indicating that watering has stopped.
Wartung
- Reinigung: Periodically check the brass inlet filter washer for debris and clean it to ensure optimal water flow.
- Batteriewechsel: When the battery indicator on the LCD screen shows low power, replace the batteries promptly to avoid interruption of watering schedules.
- Überwinterung: Before the first frost, disconnect the timer from the faucet and hose. Remove the batteries and store the timer indoors in a dry, protected area to prevent damage from freezing.
Fehlerbehebung
Hier sind einige häufige Probleme und ihre Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Timer schaltet sich nicht ein/LCD bleibt schwarz | Defekte oder falsch eingesetzte Batterien. | Replace batteries with new 2 x AAA alkaline batteries, ensuring correct polarity. |
| Water not flowing/Timer not watering | Faucet is off; low water pressure; clogged filter; incorrect program settings; valve stuck. | Ensure faucet is fully open. Check water pressure (10-120 psi required). Clean the inlet filter. Verify program settings (start time, duration, frequency). Reset the valves (see video below). |
| Wasser tritt aus den Anschlüssen aus | Loose connections; missing/damaged washer; insufficient Teflon tape. | Tighten all connections. Check for and replace any missing or damaged rubber washers. Apply more Teflon tape to faucet threads. |
| Zeitschaltuhr hält sich nicht an den Zeitplan | Incorrect clock setting; program not activated (dial not on ON); rain delay active. | Re-set the current time. Ensure the dial is set to ON. Check if rain delay is active and cancel if necessary. |
How to Reset the Valves:
If the timer's internal valves are not functioning correctly, you may need to reset them. This process involves cycling water through the timer manually to clear any obstructions or reset the mechanism.
Video: A step-by-step guide on how to reset the internal valves of the RESTMO Sprinkler Timer to ensure proper water flow.
Technische Daten
- Modell: O-HT
- Material: Messing, Metall
- Einlassgewinde: 3/4" NH (Pure Brass)
- Hose Fitting: 3/4"
- Bewässerungsdauer: 1-239 Minuten
- Bewässerungshäufigkeit: 1-12 hours or 1-7 days
- Optionen bei Regenverzögerung: 12/24/48/72 Stunden
- Max. Fließrate: 10 GPM (35 L/Min)
- Arbeitsdruck: 10-120 PSI (0.5-8.0 Bar)
- Temperaturbereich: 38 bis 120 °C (3 bis 50 °F)
- Wasserdichtigkeit: IP54
- Energiequelle: 2 x AAA-Alkaline-Batterien (nicht im Lieferumfang enthalten)
- Produktabmessungen: 3.94"T x 3.94"B x 1.57"H
- Artikelgewicht: 5 Unzen
Garantie und Support
RESTMO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo webUnsere Website. Unser Kundenservice-Team steht Ihnen bei Fragen oder Anliegen gerne zur Verfügung.
