TRENDnet TEG-S591 9-Port-Multi-Gig-Switch

1. Einleitung

This manual provides instructions for the installation, operation, and maintenance of the TRENDnet TEG-S591 9-Port Multi-Gig Switch. This unmanaged switch is designed to expand network bandwidth and reduce traffic bottlenecks, offering high-speed connectivity for various network environments.

Hauptmerkmale:

• 8 x 2.5G RJ-45 Ports (1Gbps/2.5Gbps)
• 1 x 10G RJ-45 Port (1Gbps/2.5Gbps/10Gbps)
• 60Gbps Switching Capacity
• Lüfterloses Design für geräuschlosen Betrieb
• Wall-Mountable Metal Housing
• NDAA & TAA Compliant

2. Packungsinhalt

Überprüfen Sie, ob Ihr Paket die folgenden Artikel enthält:

• TRENDnet TEG-S591 9-Port-Multi-Gig-Switch
• Kurzanleitung zur Installation
• Netzteil (12V, 1A)

If any items are missing or damaged, please contact your reseller or TRENDnet customer support.

3. Hardware-Overview

Abbildung 3.1: Layout der Frontplatte
Detaillierte Front view of the TEG-S591 switch, highlighting the eight 2.5G RJ-45 ports (1-8), one 10G RJ-45 port (9), and the corresponding LED indicators for power, link, and activity.

Abbildung 3.2: Layout der Rückseite
Hinteren view of the TEG-S591 switch, displaying the DC power input port and ventilation slots.

The TEG-S591 features a durable metal housing with ventilation for heat dissipation. The front panel includes LED indicators for power and port status, while the rear panel houses the DC power input.

LED-Anzeigen:

• DWR: Indicates power status. On when the device is powered.
• Ports 1-8 (2.5G LINK/ACT): Indicates link status and activity for 2.5G ports.
• Port 9 (10G LINK/ACT): Indicates link status and activity for the 10G port.

4. Einrichtung

The TRENDnet TEG-S591 is an unmanaged switch, designed for plug-and-play operation. No software configuration is required.

1. Stromanschluss: Connect the included power adapter to the DC IN port on the rear of the switch and then plug the adapter into a standard electrical outlet. The PWR LED on the front panel will illuminate.
2. Netzwerkgeräteverbindung: Connect your network devices (e.g., computers, servers, network-attached storage, routers, access points) to any of the RJ-45 ports (1-9) using standard Ethernet cables (Cat5e or better for 2.5G, Cat6a or better for 10G).
3. Verbindung überprüfen: Once a device is connected, the corresponding LINK/ACT LED for that port will illuminate, indicating an active network link. The LED will blink to show data activity.

Figure 4.1: Typical Network Deployment
An illustrative diagram demonstrating how the TEG-S591 Multi-Gig Switch integrates into a home network, connecting various devices like WiFi 6 routers, access points, and adapters to enhance network speed.

5. Betrieb

The TEG-S591 operates automatically once connected. It functions as a store-and-forward device, ensuring reliable data transmission. The switch supports auto-negotiation for speed and duplex mode, and auto-MDI/MDIX, eliminating the need for crossover cables.

The fanless design ensures silent operation, making it suitable for quiet environments such as home offices or living rooms.

6. Wartung

To ensure optimal performance and longevity of your TRENDnet TEG-S591 switch, follow these maintenance guidelines:

• Umgebungsbedingungen: Operate the switch within the specified temperature and humidity ranges. Avoid placing it in direct sunlight or near heat sources.
• Reinigung: Reinigen Sie die Außenseite des Schalters mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen oder Aerosolreiniger. Stellen Sie sicher, dass das Gerät vor der Reinigung ausgeschaltet ist.
• Belüftung: Ensure that the ventilation slots are not blocked to allow for proper airflow and heat dissipation.
• Kabelmanagement: Ordnen Sie die Netzwerkkabel so an, dass die Anschlüsse nicht überlastet werden und ein ordentliches Setup gewährleistet ist.

7. Fehlerbehebung

If you encounter issues with your TEG-S591 switch, refer to the following common troubleshooting steps:

• Kein Strom: Ensure the power adapter is securely connected to both the switch and a working electrical outlet. Check if the PWR LED is illuminated.
• Keine Verbindungsleuchte: Vergewissern Sie sich, dass das Ethernet-Kabel sowohl am Switch-Port als auch am angeschlossenen Gerät fest angeschlossen ist. Versuchen Sie es gegebenenfalls mit einem anderen Ethernet-Kabel oder -Port. Stellen Sie sicher, dass das angeschlossene Gerät eingeschaltet ist und ordnungsgemäß funktioniert.
• Langsame Netzwerkgeschwindigkeit: Confirm that your connected devices and cables support the desired multi-gigabit speeds (2.5G or 10G). Ensure you are using Cat5e or better cabling for 2.5G, and Cat6a or better for 10G connections. Check for network congestion or issues with the connected devices.
• Intermittierende Konnektivität: Check all cable connections for looseness or damage. Ensure the switch is placed in a well-ventilated area to prevent overheating.

For further assistance, consult the TRENDnet support resources or contact technical support.

8. Spezifikationen

9. Garantieinformationen

The TRENDnet TEG-S591 9-Port Multi-Gig Switch is backed by TRENDnet’s Lifetime Manufacturer Protection. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official TRENDnet webWebsite oder wenden Sie sich an den Kundendienst.

10. Technischer Support

TRENDnet provides reliable technical support for its products. Our team of English-speaking advisors and technical experts are available during normal business hours to assist with any inquiries or issues you may have.

For support, please visit the official TRENDnet website or refer to the contact information provided in the Quick Installation Guide included with your product.