ROBOTIME MC801 Vintage Car und AMK63 Magic Cello Musikbox 3D Holzpuzzle-Bausatz Bedienungsanleitung

1. Einleitung

This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME MC801 Vintage Car and AMK63 Magic Cello Music Box 3D Wooden Puzzle Kits. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building experience.

Abbildung 1: Überview of the ROBOTIME MC801 Vintage Car and AMK63 Magic Cello Music Box.

2. Sicherheitshinweise

• Warnung vor Kleinteilen: Dieses Set enthält Kleinteile, die verschluckt werden können. Außerhalb der Reichweite von Kleinkindern aufbewahren.
• Scharfe Kanten: Einige Holzteile können scharfe Kanten aufweisen. Gehen Sie beim Zusammenbau vorsichtig damit um.
• Aufsicht durch Erwachsene: Für jüngere Bauarbeiter wird die Aufsicht durch Erwachsene empfohlen.
• Entzündliches Material: The wooden components are flammable. Keep away from open flames and high heat sources.

3. Packungsinhalt

Nach dem Öffnen der Verpackung sollten Sie folgende Komponenten vorfinden:

• Pre-cut wooden puzzle sheets for MC801 Vintage Car.
• Pre-cut wooden puzzle sheets for AMK63 Magic Cello Music Box.
• Bedienungsanleitung (diese Anleitung).
• Small accessories (e.g., springs, gears, music box mechanism, sandpaper, wax) as required for each model.

Notiz: The kit is designed for "No Glue Needed" assembly, utilizing interlocking pieces.

Figure 2: The MC801 Vintage Car highlighting key features like piece count and glue-free assembly.

4. Montageanleitung

Follow these general tips and specific instructions for each model. It is recommended to assemble one model completely before starting the next.

4.1. Allgemeine Montagehinweise

• Weiterlesen: Review all steps for a section before beginning.
• Teileidentifikation: Carefully identify each part from the wooden sheets before detaching.
• Abnehmen der Teile: Gently push out parts. If a part is stubborn, use a craft knife (with caution) to carefully cut the connecting points.
• Schleifen: Use the included sandpaper to smooth any rough edges or burrs on the detached pieces.
• Waxing (for moving parts): For gears and other moving components, apply a small amount of wax (if included) to reduce friction and ensure smooth operation.
• Sanfte Gewalt: Apply gentle, even pressure when fitting pieces together. Do not force parts, as this may cause breakage.

4.2. ROBOTIME MC801 Vintage Car Assembly

Die MC801 Vintage Car is a detailed model consisting of approximately 296 pieces. Follow the numbered steps in the included diagrammatic instructions for precise assembly.

1. Begin by assembling the chassis and base structure of the car.
2. Attach the engine components and front grille.
3. Assemble and install the four wheels, ensuring they can rotate freely.
4. Construct the passenger compartment, including seats and dashboard.
5. Add the roof and any decorative elements.
6. Verify all connections are secure and the model is stable.

Figure 3: Assembled ROBOTIME MC801 Vintage Car.

Figure 4: The ROBOTIME MC801 Vintage Car in a display setting.

4.3. ROBOTIME AMK63 Magic Cello Music Box Assembly

The AMK63 Magic Cello Music Box is a functional model that plays music upon completion. Pay close attention to the gear mechanisms.

1. Start by building the base and the main body of the cello.
2. Carefully assemble the internal gear system and the music box mechanism. Ensure all gears mesh correctly and rotate freely after waxing.
3. Integrate the music box component into the cello body.
4. Attach the neck, scroll, and tuning pegs.
5. Add decorative elements and the bow.
6. Test the music box mechanism by gently winding it.

Figure 5: Assembled ROBOTIME AMK63 Magic Cello Music Box.

5. Bedienung

5.1. ROBOTIME MC801 Vintage Car

Die MC801 Vintage Car is primarily a static display model. Its wheels are designed to rotate, allowing for manual movement across flat surfaces. There are no motorized or wind-up functions for propulsion.

5.2. ROBOTIME AMK63 Magic Cello Music Box

To operate the music box:

1. Locate the winding key or mechanism, typically found on the side or bottom of the base.
2. Drehen Sie den Schlüssel vorsichtig im Uhrzeigersinn, bis Sie einen leichten Widerstand spüren. Drehen Sie ihn nicht zu weit, da dies den Mechanismus beschädigen kann.
3. Release the key, and the music box will begin to play its melody. The AMK63 plays "Nocturne in E Flat, Op. 9 No. 2".

Figure 6: The AMK63 Magic Cello Music Box, highlighting its musical function.

6. Wartung

• Reinigung: Dust the models regularly with a soft, dry cloth or a soft brush. Avoid using water or chemical cleaners, as they may damage the wood.
• Lagerung: Lagern Sie die Modelle in einer trockenen Umgebung, fern von direkter Sonneneinstrahlung und extremen Temperaturschwankungen, um ein Verziehen oder Ausbleichen des Holzes zu verhindern.
• Bewegliche Teile: If any moving parts (especially on the music box) become stiff, apply a small amount of wax (paraffin wax or beeswax) to the contact points.

7. Fehlerbehebung

• Nicht passende Teile: If pieces are too tight, gently sand the connecting tabs. If too loose, a tiny drop of wood glue (not included) can be used, but this is generally not recommended for these kits.
• Abgebrochenes Stück: If a piece breaks during assembly, attempt to repair it with wood glue. Contact customer support if a critical piece is irreparably damaged.
• Spieluhr spielt nicht:
  • Ensure the winding mechanism is fully wound (but not overwound).
  • Check if any gears are jammed or misaligned. Gently adjust if possible.
  • Apply wax to gears if friction is preventing movement.

8. Spezifikationen

9. Garantie und Support

ROBOTIME products are manufactured with high-quality standards. If you encounter any issues with missing or defective parts, or require assistance with assembly, please contact ROBOTIME customer support through the retailer where the product was purchased or visit the official ROBOTIME webWebsite für Supportinformationen.

Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.