Einführung
This manual provides instructions for the installation, operation, and maintenance of your PUR Faucet Mount Water Filtration System. This system is designed to provide filtered water directly from your faucet, reducing various contaminants for improved water quality.

Image: The PUR Faucet Mount Water Filtration System attached to a faucet, with water flowing from it. Three purple replacement filters are shown next to the main unit.
Im Leistungsumfang enthalten
Your PUR Faucet Mount Water Filtration System package includes the following components:
- One (1) PUR Faucet Mount Filtration System unit
- One (1) PUR filter pre-installed or for initial setup
- Three (3) additional generic replacement filters
Setup und Installation
The PUR Faucet Mount Water Filtration System is designed for easy installation without the need for special tools. Please follow these steps:
- Komponenten auspacken: Nehmen Sie alle Artikel vorsichtig aus der Verpackung.
- Prepare Faucet: Ensure your faucet is clean and free from debris. This system is compatible with most standard faucets, but not with pull-out or hand-held faucet types.
- Attach Filter System: Align the faucet mount system with your faucet's aerator. Twist or secure the system onto the faucet according to the specific adapter type provided (if any). Ensure a snug fit to prevent leaks.
- Spülfilter: Once installed, turn on the cold water and allow it to run through the filter for approximately 5 minutes. This flushes out carbon dust and prepares the filter for use.
- Auf Lecks prüfen: After flushing, inspect all connections for any signs of leakage. Tighten if necessary.
For detailed visual instructions, refer to the diagrams in the quick start guide included with your product.
Bedienungsanleitung
Using your PUR Faucet Mount Water Filtration System is straightforward:
- Gefiltertes Wasser: To dispense filtered water, activate the filter lever or button on the unit. Water will flow through the filter, providing clean drinking water.
- Ungefiltertes Wasser: To dispense unfiltered water for washing dishes or other non-drinking purposes, switch the lever or button to the unfiltered setting. This extends the life of your filter.
- Wassertemperatur: Always use cold water when operating the filter. Hot water can damage the filter media and reduce its effectiveness.
Wartung
Regular maintenance ensures optimal performance and longevity of your filtration system. The primary maintenance task is filter replacement.
Filterwechsel
Filters should be replaced approximately every 2-3 months, or after filtering 100 gallons of water, whichever comes first. The system may have an indicator light that changes color to signal when a filter change is needed.
- Wasser abstellen: Ensure the water supply to the faucet is turned off.
- Alten Filter entfernen: Locate the filter housing on the unit. Twist or unclip the housing to remove the used filter cartridge.
- Neuen Filter einfügen: Insert a new PUR replacement filter into the housing. Ensure it is seated correctly.
- Sichere Unterbringung: Reattach and secure the filter housing.
- Neuen Filter spülen: Turn on the cold water and flush the new filter for 5 minutes to remove any carbon dust.
- Reset Indicator (if applicable): If your unit has a filter life indicator, follow the manufacturer's instructions to reset it.
Always use genuine PUR replacement filters or compatible generic filters to ensure proper filtration and system function.
Fehlerbehebung
If you encounter issues with your PUR Faucet Mount Water Filtration System, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Langsamer Wasserfluss | Verstopfter Filter; niedriger Wasserdruck. | Replace the filter cartridge. Check household water pressure. |
| Leaking from Unit/Faucet Connection | Loose connection; damaged washer/gasket. | Ensure the unit is securely tightened to the faucet. Check and replace any damaged washers or O-rings. |
| Water Tastes/Smells Unfiltered | Filter expired or improperly installed. | Replace the filter. Ensure the filter is correctly seated and the unit is set to filtered mode. |
| Filteranzeige funktioniert nicht | Battery issue (if applicable); sensor malfunction. | Refer to the specific product manual for battery replacement or contact customer support. |
Technische Daten
- Marke: PUR
- Modellname: Wasserhahnhalterung
- Artikelmodellnummer: e0d21695-f6e6-403d-b633-a3d05cdf4577
- UPC: 328785002096
- Besonderheit: Chlorine Reduction, Lead Reduction
- Installationstyp: Wasserhahnhalterung
- Energiequelle: Handbuch
- Filterlebensdauer: Approximately 100 gallons or 2-3 months (typical)
Garantie und Support
For warranty information, product registration, or technical support, please visit the official PUR webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
PUR Customer Support:
- WebWebsite: www.pur.com
- Telefon: Refer to the PUR webWebseite für aktuelle Kontaktnummern.





