BoxWave DirectSync PD-Kabel (3 m) – USB-C auf USB-C (100 W) Bedienungsanleitung

1. Einleitung

This manual provides essential instructions for the proper use and maintenance of your BoxWave DirectSync PD Cable. This USB-C to USB-C cable is designed for efficient power delivery up to 100W and high-speed data transfer, compatible with various USB-C devices, including the XTool XT90.

Image 1.1: The BoxWave DirectSync PD Cable, coiled for storage.

2. Produktmerkmale

100 W Stromversorgung: Supports fast charging for a wide range of USB-C devices, including laptops, tablets, and smartphones, with power delivery up to 100 Watts.
Hochgeschwindigkeitsdatenübertragung: Facilitates data synchronization at speeds up to 480Mbps, allowing for quick file transfers while charging.
Strapazierfähiges Flechtdesign: Constructed with high-grade nylon braiding for enhanced durability, resistance to tangles, and protection against daily wear and tear.
Verstärkte Zugentlastung: Features rubberized grommet strain reliefs at both connector ends to prevent cable fraying and ensure a stable connection over time.
Universelle USB-C-Kompatibilität: Designed for use with USB-C enabled devices, such as the XTool XT90.

Laptop charging with BoxWave DirectSync PD Cable

Image 2.1: The cable connected to a laptop, illustrating its power delivery capability.

Laptop and phone charging and syncing with BoxWave DirectSync PD Cable

Image 2.2: The cable simultaneously charging a laptop and a smartphone, demonstrating charge and sync functionality.

3. Einrichtung und Verbindung

Ports identifizieren: Stellen Sie sicher, dass Ihr Gerät und Ihre Stromquelle (z. B. Netzteil, Computer) über kompatible USB-C-Anschlüsse verfügen.
An Stromquelle anschließen: Insert one end of the BoxWave DirectSync PD Cable into a USB-C power adapter or a USB-C port on a computer.
Mit Gerät verbinden: Insert the other end of the cable into the USB-C port of your device (e.g., XTool XT90, laptop, smartphone).
Verbindung überprüfen: Confirm that both ends of the cable are securely seated in their respective ports. Your device should indicate that it is charging or connected for data transfer.

Image 3.1: The BoxWave DirectSync PD Cable connected to an XTool XT90 device.

4. Bedienungsanleitung

4.1 Aufladen Ihres Geräts

To charge your device, connect the cable as described in the "Setup and Connection" section. The cable supports Power Delivery (PD) up to 100W, allowing for rapid charging when paired with a compatible power adapter and device. Charging speed may vary based on the power source and device capabilities.

4.2 Datenübertragung

For data transfer, connect your device to a computer using the BoxWave DirectSync PD Cable. Once connected, your device should appear as a removable storage device or prompt you to select a connection mode (e.g., "File Transfer," "PTP"). Follow your device's instructions to initiate data transfer. The cable supports data speeds up to 480Mbps.

5. Wartung und Pflege

Lagerung: Store the cable in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tightly coiling or bending the cable at sharp angles to prevent internal damage.
Reinigung: Verwenden Sie ein weiches, trockenes Tuch, um Kabel und Anschlüsse vorsichtig abzuwischen. Verwenden Sie keine flüssigen Reiniger oder Scheuermittel.
Handhabung: Always grasp the connector head when plugging or unplugging the cable, rather than pulling on the cable itself. This helps preserve the integrity of the strain relief and internal wiring.
Inspektion: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if damage is observed.

Close-up of the nylon braided exterior of the BoxWave DirectSync PD Cable

Bild 5.1: Eine Nahaufnahme view of the durable nylon braided cable design.

Close-up of the reinforced strain relief on the BoxWave DirectSync PD Cable connector

Image 5.2: Detail of the reinforced strain relief, designed to prevent cable damage at the connector.

6. Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Gerät wird nicht geladen.	Wackelkontakt. Inkompatibles Netzteil. Device or power source issue.	Ensure cable is firmly plugged into both device and power source. Use a USB-C PD compatible power adapter. Test with another cable or power source to isolate the issue.
Langsame Ladegeschwindigkeit.	Power adapter not sufficient for 100W PD. Das Gerät unterstützt kein Schnellladen.	Use a power adapter that supports 100W Power Delivery. Verify your device's charging specifications.
Datenübertragung funktioniert nicht.	Incorrect device connection mode. Treiberprobleme auf dem Computer.	On your device, select "File Transfer" or "MTP" mode. Ensure your computer has the necessary drivers for your device.

7. Spezifikationen

Modell: DirectSync PD-Kabel
Marke: BoxWave
Steckertyp: USB-C auf USB-C
Kabellänge: 3 feet (approximately 100 cm)
Stromversorgung: Bis zu 100 W
Datenübertragungsgeschwindigkeit: Bis zu 480 Mbit/s
Material: High-grade Nylon Braided
Farbe: Tiefschwarz
Artikelgewicht: 3 Unzen

8. Garantie und Support

BoxWave products are designed for reliability and performance. For information regarding warranty coverage, technical support, or to contact customer service, please visit the official BoxWave website or refer to the product packaging for specific details.

WebWebsite: www.boxwave.com

	AUKEY CB-CD2 3.3ft/1m USB 3.0 A to C Cable User Manual User manual for the AUKEY CB-CD2 3.3ft/1m USB 3.0 A to C Cable, providing specifications, package contents, and warranty information.
	DJI RC PLUS Package Contents Detailed list of items included in the DJI RC PLUS package, covering remote controller, power adapter, cables, and battery. Information is provided in multiple languages for user convenience.
	AUKEY CB-CMD3 USB 3.0 A to C Cable User Manual User manual for the AUKEY CB-CMD3 USB 3.0 A to C Cable, including package contents, specifications, and warranty information.
	dbramante1928 USB-C-Ladekabel: 3 m, 100 W Leistungsabgabe Benutzerhandbuch und Produktinformationen zum dbramante1928 USB-C-zu-USB-C-Ladekabel (3 m, 100 W). Enthält Spezifikationen, Sicherheitshinweise, Garantiebestimmungen und Pflegehinweise in mehreren Sprachen.
	dbramante1928 CB20CCBL4389 USB-C-zu-USB-C-Kabel 100 W – 2 m, Schwarz Dieses Dokument enthält wichtige Informationen zum dbramante1928 CB20CCBL4389, einem 2 Meter langen USB-C-zu-USB-C-Kabel mit 100 W Leistung. Es umfasst Spezifikationen, Sicherheitshinweise, Garantiebedingungen und Kundendienstinformationen und ist in mehreren Sprachen verfügbar.
	AUKEY CB-CD5 3.3ft/1m USB-C-auf-C-Kabel Benutzerhandbuch Offizielles Benutzerhandbuch für das AUKEY CB-CD5 3.3 ft/1 m USB-C-auf-C-Kabel. Hier finden Sie Spezifikationen, Packungsinhalt, Garantieinformationen und Kundensupportdetails von AUKEY.

BoxWave DirectSync PD Cable