AkaGear DS10 Pro Keyless Entry Door Lock User Manual

1. Produktüberschreitungview

The AkaGear DS10 Pro is a smart keyless entry door lock designed for enhanced home security and convenience. It offers multiple unlocking options including fingerprint, PIN code, smartphone app control via Bluetooth, and traditional mechanical keys. This lock features fast fingerprint recognition, auto-lock functionality, mute mode for quiet entry, and long battery life with backup power options.

Image: The AkaGear DS10 Pro smart lock illustrating its four primary unlocking methods: smartphone app, fingerprint, keypad code, and physical key.

2. Sicherheitshinweise

• Lesen Sie alle Anweisungen vor der Installation und Verwendung.
• Versuchen Sie nicht, das Schloss zu zerlegen oder zu verändern. Dies kann zum Erlöschen der Garantie und zur Gefährdung der Sicherheit führen.
• Use only specified batteries (4 AA batteries, not included). Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a safe place outside the home to prevent lockout.
• Avoid exposing the lock to direct water spray or harsh chemicals.

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• Fingerprint deadbolt door lock (exterior keypad and interior unit)
• 2 Standardtasten
• Verriegelungsmechanismus
• Schlagplatte
• Montageplatte
• Schrauben (verschiedene Größen für die Montage)
• Installation Instructions / Template

Image: A complete set of AkaGear DS10 Pro smart lock components, including the main lock units, latch, keys, and mounting hardware.

4. Installationsanleitung

The AkaGear DS10 Pro is designed for easy installation on standard US doors (left or right-handed) with a screwdriver. No complex adjustments are typically required.

4.1 Prepare Your Door

Stellen Sie sicher, dass Ihre Tür die folgenden Spezifikationen erfüllt:

• Türstärke: 1-3/8" bis 2" (35 mm bis 50 mm)
• Dornmaß: 2-3/8" oder 2-3/4" (60 mm oder 70 mm)
• Door hole diameter: 2-1/8" (54mm)

Image: A detailed diagram illustrating the required door dimensions and lock component sizes for proper installation.

4.2 Schrittweise Installation

1. Installieren Sie den Riegel: Insert the latch into the door edge. Ensure the 'UP' sign on the latch is pointing upwards. Secure with screws.
2. Installieren Sie das Tastenfeld: Feed the cable from the exterior keypad through the door hole. Align the keypad with the latch and door.
3. Installieren Sie die Montageplatte: Secure the mounting plate to the interior side of the door, ensuring the cable passes through the designated opening. Connect the cable from the keypad to the interior unit.
4. Install the Interior Unit: Attach the interior unit to the mounting plate, ensuring the spindle engages correctly with the latch. Secure with screws.
5. Batterien einlegen: Open the battery cover on the interior unit and insert 4 AA batteries (not included), observing polarity.
6. Testbetrieb: After battery insertion, the lock will perform an automatic orientation process. Wait for 5 seconds for this to complete. Test the lock using the mechanical key and by manually turning the knob.

Image: A visual step-by-step guide demonstrating the installation process of the AkaGear DS10 Pro smart lock.

5. Einrichtung und Programmierung

After installation, program your lock for secure access. The default programming code is 123456.

5.1 Initial Setup and Programming Code Change

It is recommended to change the default programming code immediately after installation. Refer to the programming video for detailed steps.

5.2 Adding User Codes and Fingerprints

The lock supports up to 300 PIN codes and 50 fingerprints. Follow the voice prompts during programming.

Image: The AkaGear DS10 Pro smart lock highlighting its capacity for up to 50 fingerprints, 300 user codes, and the inclusion of 2 physical keys.

5.3 Steuerung per Smartphone-App

Connect the lock via Bluetooth to your smartphone app to add users, set permissions, and monitor access logs. For remote control and integration with Alexa/Google Home Assistant, a separate Gateway (ASIN: B0F5GKK5HY) is required.

Image: The smartphone application interface for the AkaGear DS10 Pro, demonstrating easy management of lock settings and user access.

6. Bedienungsanleitung

6.1 Entsperrmethoden

• Fingerabdruck: Place your registered finger on the sensor for 0.3-second recognition.
• PIN-Code: Geben Sie Ihren 4- bis 9-stelligen PIN-Code über das Tastenfeld ein.
• Smartphone-App: Use the AkaGear app to unlock the door via Bluetooth.
• Mechanischer Schlüssel: Verwenden Sie die mitgelieferten physischen Schlüssel als Backup.

Image: The AkaGear DS10 Pro lock demonstrating its fast fingerprint unlock feature with a 0.3-second identification time.

6.2 Auto-Lock & Mute Mode

• Automatische Sperre: The lock can be set to automatically secure your home 5-59 seconds after closing the door. This feature can be enabled or disabled via programming.
• Stummschaltung: Enable mute mode for quiet entry and exit, preventing disturbance to others.

Image: The AkaGear DS10 Pro smart lock's auto-lock feature, which secures the door automatically within 5-59 seconds after closing.

7. Wartung

7.1 Batteriewechsel

The lock operates on 4 AA batteries (not included) with a battery life of up to 12 months (approximately 7,000 cycles). The lock will provide low-battery alerts when replacement is needed.

7.2 Backup Power

In case of complete battery depletion, the lock can be temporarily powered via a USB-C port for emergency access.

Image: The AkaGear DS10 Pro smart lock highlighting its long battery life and the low battery indicator light, ensuring you are aware when batteries need replacement.

8. Fehlerbehebung

• Schloss reagiert nicht: Check battery levels. Replace batteries if low. Ensure the cable connection between the keypad and interior unit is secure.
• Fingerabdruck nicht erkannt: Ensure your finger is clean and dry. Try re-registering your fingerprint.
• PIN-Code funktioniert nicht: Verify the code is correct. Ensure the lock is not in mute mode if expecting voice feedback.
• Automatische Verriegelung funktioniert nicht: Check the auto-lock settings in the programming menu or via the app.
• Door lock orientation issue: The lock automatically identifies left/right door orientation. If issues persist, perform a factory reset and re-install.

9. Spezifikationen

10. Garantie und Support

For warranty information, technical support, or any inquiries regarding your AkaGear DS10 Pro Keyless Entry Door Lock, please refer to the contact information provided in your product packaging or visit the official AkaGear webWebsite.