Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright TL-S12W-S 120mm ARGB PWM Case Fan. Please read this guide thoroughly before installation to ensure proper functionality and longevity of your product.
Bild: Überview of the Thermalright TL-S12W-S 120mm ARGB PWM Case Fans, highlighting dual side pad shock absorption, airflow fan blade design, and low noise S-FDB bearing.
Produkteigenschaften
- Hochleistungskühlung: Automatic speed control via 4-pin PWM fan cable, adjusting speed based on motherboard temperature.
- ARGB-Beleuchtung: Features an ARGB light effect with 7 fan blades for soft, synchronized lighting. Colors can be managed via motherboard ARGB port.
- Langlebige Konstruktion: Made from insulation grade PBT+PC material.
- Leiser Betrieb: Soft silicone feet on all four corners reduce fan noise through damping.
- Fluid Dynamic Bearing (S-FDB): Equipped with a high-durability S-FDB bearing for low-friction and low-noise operation, ensuring a long service life.
- Optimierter Luftstrom: Fine-tuned fan blade shape and angles for enhanced airflow performance.
Image: Close-up of the fan, illustrating the 7-blade design and PWM fan speed sync connector, capable of 47.6 CFM airflow at 1500 RPM.
Image: Detail of the fan's corner, showing the soft-touch silicone rubber pads designed for vibration absorption and noise damping.
Packungsinhalt
Das Paket enthält die folgenden Artikel:
- Thermalright TL-S12W-S CPU Fan (3 units for X3 pack)
- Befestigungsschrauben
- ARGB-Beleuchtungskabel
- PWM-Lüfterkabel
Technische Daten
| Besonderheit | Spezifikation |
|---|---|
| Modell | TL-S12W-S |
| Maße | 120 x 120 x 25 mm (4.72"L x 0.98"W x 4.72"H) |
| Geschwindigkeit | 1500 U / min ± 10% |
| Geräuschpegel | ≤ 23.2 dBA |
| Luftstrom | 47.6 CFM |
| Luftdruck | 1.31 mm H2O |
| Konnektor | 4-Pin PWM (Fan), 3-Pin ARGB (+5V) |
| Aktuell | 0.15 A |
| Bandtage | 12 Volt (DC) |
| Wastage | 1.8 Watt |
| Lagertyp | S-FDB (Fluid Dynamic Bearing) |
| Material | PBT+PC Plastic |
| Kompatible Geräte | Desktop PCs (Case, CPU Air Coolers, Liquid Coolers) |
Setup und Installation
Follow these steps to properly install your Thermalright TL-S12W-S fans into your PC system.
1. Physische Installation
- Luftstromrichtung bestimmen: Select the fan installation direction based on your PC case's desired airflow. Fans typically have an arrow indicating airflow direction.
- Montieren Sie den Lüfter: Position the fan in the desired location (e.g., rear exhaust, front intake, top exhaust). Use the provided screws to secure the fan to the PC case. Ensure a snug fit without overtightening.
Image: A fan being placed into a PC case opening, demonstrating the initial step of physical installation.
Image: A hand using a screwdriver to secure a fan to the back of a PC case, illustrating the screw-in installation process.
2. Wiring for ARGB Lighting
- ARGB-Header anschließen: Each fan has a 3-pin ARGB header. Connect these headers in series using the provided ARGB sync cables. Ensure the arrows on the connectors align to maintain correct polarity.
- Mit dem Motherboard verbinden: Plug the final 3-pin ARGB cable into your motherboard's +5V ARGB header. The TL-S12 series supports connecting up to 4 fans to a single motherboard 3-pin ARGB socket, while the TL-S12S series supports up to 3.
Image: Close-up of ARGB lighting cables being connected, showing the male and female headers and the importance of aligning arrows for proper synchronization.
3. Wiring for Fan Speed Control (PWM)
- Connect PWM Headers: Connect the 4-pin PWM headers of the fans in series using the provided PWM sync cables.
- Mit dem Motherboard verbinden: Plug the final 4-pin PWM cable into your motherboard's fan header. This allows the motherboard to control the fan speed automatically based on system temperature. A maximum of 3 fans can be connected to a single motherboard fan socket.
Image: A series of fans with their PWM cables being connected, demonstrating how to daisy-chain them for synchronized speed control.
4. Installationsvideoanleitung
Video: Official installation guide for Thermalright TL-S12 series fans, demonstrating the physical installation into a PC case and wiring for ARGB lighting and PWM fan speed control.
Bedienungsanleitung
Once installed and connected, your Thermalright TL-S12W-S fans will operate as follows:
- PWM Fan Speed Control: The fans' speed is automatically regulated by your motherboard via the 4-pin PWM connection. This ensures optimal cooling performance by adjusting fan speed based on CPU or system temperature. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
- ARGB-Beleuchtungssteuerung: The ARGB lighting effect is controlled by your motherboard's +5V ARGB header. You can customize lighting patterns, colors, and synchronization through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard software is up-to-date for the best experience.
Image: The fan showcasing its dual-side ring ARGB lighting, illustrating the aesthetic customization possibilities.
Wartung
Regelmäßige Wartung trägt dazu bei, eine optimale Leistung zu gewährleisten und die Lebensdauer Ihrer Ventilatoren zu verlängern.
- Staubreinigung: Reinigen Sie die Lüfterflügel und das Gehäuse regelmäßig mit Druckluft oder einer weichen Bürste von Staub. Stellen Sie sicher, dass der PC vor der Reinigung ausgeschaltet und vom Stromnetz getrennt ist.
- Lager: The S-FDB bearing is designed to be maintenance-free. Do not attempt to disassemble the fan for lubrication or repair, as this may void the warranty.
- Kabelmanagement: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components, which could lead to damage or noise.
Fehlerbehebung
If you encounter issues with your Thermalright TL-S12W-S fans, refer to the following common troubleshooting steps:
- Lüfter dreht sich nicht:
- Prüfen Sie, ob das 4-polige PWM-Kabel fest mit dem Lüfteranschluss auf dem Motherboard verbunden ist.
- Verify that the motherboard's fan header is enabled in BIOS/UEFI settings.
- Stellen Sie sicher, dass die Stromversorgung ordnungsgemäß funktioniert.
- ARGB-Beleuchtung funktioniert nicht:
- Confirm the 3-pin ARGB cable is correctly connected to the motherboard's +5V ARGB header, with arrows aligned.
- Check your motherboard's RGB software to ensure lighting is enabled and configured.
- Ensure the motherboard's ARGB header is providing power.
- Übermäßiger Lärm:
- Verify that all mounting screws are tightened properly.
- Prüfen Sie, ob Kabel oder andere Hindernisse die Lüfterflügel berühren.
- Entfernen Sie jeglichen Staub von den Lüfterflügeln.
- Ensure the fan is not running at excessively high RPMs; adjust fan curves in BIOS/UEFI if necessary.
Garantie und Support
Thermalright-Produkte werden nach hohen Qualitätsstandards gefertigt. Informationen zu Garantie, technischem Support oder Serviceanfragen finden Sie auf der offiziellen Thermalright-Website. webBesuchen Sie unsere Website oder wenden Sie sich an Ihren Händler vor Ort. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
