Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK. This advanced outdoor lighting solution features a 180° motion sensor, multiple lighting modes, adjustable color temperature, and rotatable light heads for optimal illumination and security.
Bild: The ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK, shown with its packaging. This image illustrates the product's design and included components.
Sicherheitshinweise
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury. Keep this manual for future reference.
- Elektrische Sicherheit: Vor der Installation oder Wartung der Leuchte muss immer die Stromzufuhr am Sicherungskasten unterbrochen werden. Stellen Sie sicher, dass alle Kabelverbindungen fest sitzen und den örtlichen Elektrovorschriften entsprechen.
- Erdung: The fixture must be properly grounded to prevent potential electrical shock.
- Qualifizierter Elektriker: Wenn Sie sich bei irgendeinem Teil des Installationsprozesses unsicher sind, konsultieren Sie einen qualifizierten Elektriker.
- Betriebstemperatur: Do not operate the fixture outside its specified temperature range.
- Feuchte Standorte: This fixture is rated IP65 for wet locations, but ensure all seals and connections are properly secured during installation to maintain this rating.
Setup und Installation
Follow these steps for proper installation of your flood light. Ensure power is OFF at the circuit breaker before proceeding.
1. Bereiten Sie die Installation vor
- Packen Sie die Leuchte aus und überprüfen Sie sie auf eventuelle Beschädigungen.
- Stellen Sie sicher, dass alle notwendigen Montageteile vorhanden sind.
- Schalten Sie den Strom am Hauptschalter aus.
2. Montage der Vorrichtung
- Befestigen Sie die Montagehalterung mit den mitgelieferten Schrauben an der Anschlussdose.
- Feed the electrical wires from the junction box through the gasket and into the fixture's wiring compartment.
- Befestigen Sie die Vorrichtung an der Montagehalterung.
3. Kabelverbindungen
- Verbinden Sie Schwarz Kabel von der Leuchte zum black (live) wire from the power supply.
- Verbinden Sie Weiß Kabel von der Leuchte zum white (neutral) wire from the power supply.
- Verbinden Sie green (ground) Kabel von der Leuchte zum green or bare copper (ground) wire from the power supply.
- Ensure all connections are secured with wire nuts and tucked neatly into the junction box.
4. Einstellen der Leuchtenköpfe
The light heads are rotatable 150° side-to-side and 180° up-and-down. Adjust them to cover your desired illumination area.
Bild: Illustration showing the 180° up-and-down and 150° side-to-side rotation capabilities of the flood light heads, allowing for precise light direction.
Bild: Detailed product specification diagram showing dimensions (10-1/4" L x 4-7/16" W x 6-13/16" H) and key features like motion sensor, photocell, 20W power, 5CCT, 2045lm brightness, and IP65 wet location rating.
Bedienungsanleitung
Your ASD LED Flood Light offers versatile operation modes and customizable settings.
1. Selecting Lighting Modes
Use the control dial on the motion sensor to select one of three operating modes:
- PÜNKTLICH: The light functions as a standard lamp, staying on continuously without motion sensing.
- DUSK TO DAWN (D2D): The light automatically turns on at dusk and off at dawn, based on ambient light levels detected by the photocell.
- WAGEN: The light turns on and off based on motion detection and your selected lux requirement settings (L - Low sensitive / M - Middle sensitive / H - High sensitive).
Bild: Diagram illustrating the control dial for selecting ON TIME, D2D (Dusk to Dawn), and AUTO modes, with visual examples of how the light behaves in each setting.
Bild: The flood light operating at night, demonstrating the built-in dusk-to-dawn photocell functionality which automatically activates the light when ambient light levels drop.
2. Einstellungen des Bewegungssensors
The integrated 180° motion sensor has a detection range of up to 60 feet. In AUTO mode, you can adjust the sensitivity:
- L (Low Sensitive): Less sensitive to movement, ideal for areas with minimal activity.
- M (Middle Sensitive): Standardempfindlichkeit für allgemeine Anwendungen.
- H (High Sensitive): Most sensitive to movement, suitable for high-traffic areas or enhanced security.
You can also adjust the 'Hold Time' (how long the light stays on after motion is detected) and 'Ambient Light' (lux level at which the sensor becomes active) settings using the respective dials on the sensor unit.
Bild: A person walking in front of a garage, demonstrating the 180° detection angle of the high-sensitive motion sensor, which activates the flood light.
Bild: Diagram showing the flexible settings for the motion sensor, including Ambient Light (less than 10 lux), Hold Time (10 seconds to 10 minutes), and Detection Motion Speed (0.6-1.5 m/s), with a visual representation of the 60ft detection distance.
3. Color Temperature (CCT) Adjustment
The fixture offers 5 selectable color temperatures, ranging from warm to daylight. To change the CCT, locate the CCT switch on the fixture and slide it to your desired setting:
- 2700K: Weiches Weiß
- 3000K: Warmweiß
- 3500K: Neutralweiß
- 4000K: Kaltweiß
- 5000K: Tageslicht
Bild: Visual representation of the 5 CCT options (2700K, 3000K, 3500K, 4000K, 5000K) and how they appear when the flood light is active, allowing users to select their preferred light ambiance.
Wartung
Regelmäßige Wartung gewährleistet optimale Leistung und Langlebigkeit Ihres Flutlichts.
- Reinigung: Reinigen Sie die Armatur regelmäßig mit einem weichen, fusselfreien Tuch.amp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel oder Lösungsmittel, da diese die Oberfläche oder elektrische Bauteile beschädigen können.
- Inspektion: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten connections as needed.
- Sensorlinse: Halten Sie die Linse des Bewegungssensors sauber und frei von Verunreinigungen (z. B. Schmutz, Spinnweben).webs) to ensure proper operation.
Fehlerbehebung
Sollten Sie Probleme mit Ihrem Flutlicht haben, beachten Sie bitte die folgenden häufigen Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | No power, faulty wiring, incorrect mode setting, photocell detecting too much light. | Check circuit breaker. Verify wiring connections. Ensure mode is set to AUTO or ON TIME. Cover photocell to test if it's detecting light. |
| Licht bleibt dauerhaft an. | Mode set to ON TIME or D2D, constant motion detected, sensor sensitivity too high. | Switch mode to AUTO. Reduce motion sensor sensitivity (L setting). Check for constant heat sources or movement in detection zone. |
| Bewegungssensor erkennt keine Bewegung. | Sensor obstructed, sensitivity too low, incorrect ambient light setting. | Clean sensor lens. Increase sensor sensitivity (H setting). Adjust ambient light setting on the sensor. Ensure sensor is aimed correctly. |
| Das Licht flackert oder wird schwächer. | Loose wiring, voltage fluctuations, incompatible dimmer (if applicable). | Check and tighten all wiring connections. Consult an electrician for voltage issues. This fixture is not designed for use with dimmers. |
Produktspezifikationen
- Marke: ASD
- Modellname: SFL A-SFL-20BK
- Teilenummer: A-SFL-20BK
- Farbe: Black with Motion Sensor
- Material: Aluminium, Polycarbonat
- Stil: Modern
- Leuchtenform: Scheinwerfer
- Zimmertyp: Außenbereiche
- Produktabmessungen: 10.24 Zoll L x 4.45 Zoll B x 6.81 Zoll H
- Spezifische Verwendungszwecke für das Produkt: Im Freien
- Verwendung im Innen- und Außenbereich: Im Freien
- Energiequelle: Festverdrahtet
- Installationstyp: Unterputz
- Besondere Merkmale: 180° 3 Modes Motion Sensor and Photocell, 5 Color Temperature Options, Beam Angle 100°, Rotatable Light Heads for Directional Light Control, Wet Locations Rated (IP65)
- Kontrollmethode: Remote (referring to sensor adjustments, not a physical remote)
- Lichtquellentyp: LED
- Bandtage: 120 Volt
- Beleuchtungsmethode: Einstellbar
- Artikelgewicht: 1 Pfund
- Wastage: 20 Watt
- Stückzahl: 1.0 Anzahl
- Montageart: Wandhalterung
- Gerätetyp: Nicht entfernbar
- UPC: 810128113458
- Zertifizierungen: UL, DLC Premium
- Lebensdauer: 145,000 Stunden
Garantieinformationen
This ASD LED Motion Sensor Outdoor Flood Light (Model A-SFL-20BK) is covered by a 5 Jahr eingeschränkte Garantie Diese Garantie gilt ab Kaufdatum und deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab. Sie deckt keine Schäden ab, die durch unsachgemäße Installation, Unfälle, Missbrauch, unsachgemäße Verwendung oder unbefugte Änderungen entstehen.
For warranty claims or further details, please retain your proof of purchase and contact customer support.
Kundenservice
If you have any questions, require technical assistance, or need to report an issue with your ASD LED Motion Sensor Outdoor Flood Light, please contact our customer support team.
Please visit the official ASD website for the most current contact information, including phone numbers, email addresses, and online support resources.
Online-Ressourcen: Visit the ASD Store on Amazon
