Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Dual Head Motion Sensor Security Outdoor Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed to enhance security and illumination in outdoor spaces with its integrated motion and dusk-to-dawn sensors, and selectable color temperature feature.
Sicherheitshinweise
WARNUNG: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. Do not install this fixture with wet hands or while standing on a wet or damp Oberfläche.
VORSICHT: All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician. This fixture is intended for outdoor use only and is rated for wet locations.
- Ensure the mounting surface is structurally sound to support the fixture.
- Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
- Halten Sie brennbare Materialien von der Leuchte fern.
- Tragen Sie während der Installation Schutzbrille und Handschuhe.
Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind.
- LED Dual Head Motion Sensor Security Outdoor Light
- Mounting Hardware (screws, wire nuts, gasket, mounting plate)
Installation
Follow these steps for proper installation of your security light.
- Strom ausschalten: Vor Beginn der Arbeiten muss sichergestellt werden, dass die Stromzufuhr zur Anschlussdose am Sicherungsautomaten oder Sicherungskasten abgeschaltet ist.
- Montagefläche vorbereiten: Secure the mounting plate to the junction box using the provided screws. Ensure the plate is flush and stable.
- Verdrahtung: Connect the fixture's wires to your household wiring. Connect the black wire from the fixture to the black (live) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the green/ground wire from the fixture to the bare copper (ground) wire from the junction box. Secure connections with wire nuts.
- Montagevorrichtung: Attach the fixture body to the mounting plate, ensuring the gasket is properly seated to prevent water intrusion. Secure with the provided screws.
- Lichtköpfe einstellen: Loosen the adjustment screws on the light heads to position them as desired for optimal coverage. Tighten screws once adjusted.
Betrieb
Your Feit Electric security light features multiple operational modes for enhanced functionality.
Dämmerungssensor
The integrated dusk-to-dawn sensor automatically turns the light on at sundown and off at sunrise, providing continuous illumination during nighttime hours without manual intervention. This feature is active by default.
Bewegungssensor
The motion sensor detects movement within its coverage area, activating the light when motion is detected. The detection range is approximately 60 feet. The light will remain on for a set duration after motion ceases, then turn off automatically.
5CCT Color Selectable
Before or during installation, you can select your preferred color temperature using the CCT control switch located on the fixture. Choose from five options:
- 2700K: Weiches Weiß
- 3000K: Strahlendes Weiß
- 4000K: Kaltweiß
- 5000K: Tageslicht
- 6500K: Tageslicht Deluxe
Wartung
The Feit Electric LED Dual Head Motion Sensor Security Outdoor Light is designed for minimal maintenance.
- Reinigung: Um die Leuchte zu reinigen, stellen Sie sicher, dass der Strom abgeschaltet ist. Verwenden Sie ein weiches, fusselfreies Tuch.amp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel oder Lösungsmittel, da diese die Oberfläche oder elektrische Bauteile beschädigen können.
- Lampenwechsel: This fixture features integrated LEDs, meaning there are no bulbs to replace. The LEDs are rated for a 50,000-hour lifetime.
- Wetterbeständigkeit: The rugged, weather-resistant housing (IP65 rated) is designed to withstand various outdoor conditions. Periodically check for any debris accumulation that might obstruct sensors or light output.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Kein Strom am Gerät. Der Dämmerungssensor erkennt zu viel Umgebungslicht. | Leistungsschalter/Sicherung prüfen. Ensure sensor is not obstructed and ambient light levels are low enough for activation. |
| Licht bleibt dauerhaft an. | Motion sensor is continuously detecting movement. Problem mit der Verkabelung. | Ensure no constant motion in the detection zone. Adjust sensor angle if necessary. Überprüfen Sie, ob die Kabelverbindungen korrekt sind. |
| Der Bewegungssensor erkennt keine Bewegung. | Sensor obstructed or improperly aimed. Ambient temperature too high (reduces sensor sensitivity). | Hindernisse beseitigen und den Sensorwinkel anpassen. Ensure sensor is not exposed to direct heat sources. |
| Licht flackert. | Wackelkontakt. Bandtage Schwankungen. | Schalten Sie die Stromzufuhr ab und überprüfen Sie alle Kabelverbindungen. Konsultieren Sie einen Elektriker, wenn die SpannungtagDie Probleme bestehen weiterhin. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | S10.5DFL/5CCT/MM/BZ |
| Wastage | 48 Watt |
| Helligkeit | 5000 Lumen |
| Bandtage | 120 Volt |
| Farbtemperatur (CCT) | 2700K, 3000K, 4000K, 5000K, 6500K Wählbar |
| Lebensdauer | 50,000 Stunden |
| Bewegungssensorabdeckung | Bis zu 60 Fuß |
| Dämmerungsfunktion | Integriert |
| Innen-/Außenbereich | Im Freien |
| Wasserbeständigkeit | Water Resistant (IP65 Rated) |
| Abmessungen (L x B x H) | 9.68" x 4.58" x 4.94" |
| Gewicht | 1.2 Pfund |
| Im Lieferumfang enthaltene Komponenten | Montagezubehör |
Garantie und Support
This Feit Electric product is backed by a 5-year manufacturer's warranty. For warranty claims or technical support, please contact Feit Electric customer service. Retain your proof of purchase for warranty validation.
For further assistance, visit the official Feit Electric webBesuchen Sie die Website oder kontaktieren Sie deren Kundendienst.
