Einführung
This manual provides essential instructions for the safe and efficient use of your Sencor SRV 1550WH Robot Vacuum Cleaner and Mop. Please read this manual thoroughly before operating the device and keep it for future reference.
Produkt überview
The Sencor SRV 1550WH is a robot vacuum cleaner and mop designed for autonomous cleaning. It vacuums dirt and simultaneously mops dust from hard floors. Equipped with two side brushes, it effectively cleans along walls and in corners. Its ultra-slim design allows it to navigate under furniture and around obstacles. The SENCOR Smart Room technology ensures efficient movement, and the device features intelligent impact and fall sensors for safe operation.

Bild 1: Sencor SRV 1550WH Robot Vacuum Cleaner and Mop with its included accessories, including the charging station, remote control, side brushes, mop pads, and cleaning tools.
Packungsinhalt
- Robot vacuum cleaner (including two side brushes and filters)
- Akkuladestation
- Reinigungszubehör
- 3x textile mop sleeves
- Fernbedienung
- 2x AAA batteries (for remote control)
- 2x spare rotating side brushes
- Netzteil
- 1x spare HEPA filter
- Reinigungsbürste
Sicherheitshinweise
Before using the appliance, please read all safety warnings and instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual in a safe place for future reference.
- Dieses Gerät kann von Kindern ab 8 Jahren und von Personen mit eingeschränkten physischen, sensorischen oder geistigen Fähigkeiten oder Mangel an Erfahrung und Wissen verwendet werden, wenn sie beaufsichtigt werden oder in die sichere Verwendung des Geräts eingewiesen wurden und die damit verbundenen Gefahren verstehen.
- Kinder dürfen nicht mit dem Gerät spielen. Reinigung und Benutzerwartung dürfen nicht von Kindern ohne Aufsicht durchgeführt werden.
- Only use the original power adapter and charging station provided by the manufacturer.
- Das Gerät darf nicht in feuchten Umgebungen oder in der Nähe von Wasser verwendet werden.
- Stellen Sie sicher, dass die Ladestation auf einer ebenen, stabilen Fläche an einer Wand steht und dass sich um sie herum ausreichend Platz befindet.
- Entfernen Sie vor Beginn der Reinigung alle losen Kabel, kleinen Gegenstände oder zerbrechlichen Dinge aus dem Reinigungsbereich.
- Do not operate the robot over open flames or hot ashes.
- Der Roboter darf keine großen Gegenstände, Flüssigkeiten oder brennende/rauchende Materialien aufnehmen.
- Reinigen Sie die Bürsten und Filter regelmäßig, um eine optimale Leistung zu gewährleisten.
Aufstellen
1. Auspacken und Erstinspektion
Carefully remove all components from the packaging. Check for any signs of damage. Retain the packaging for future transport or storage.
2. Platzierung der Ladestation
Place the charging station against a wall in an open area. Ensure there is at least 1 meter (3 feet) of clear space on both sides and 2 meters (6 feet) in front of the charging station for the robot to easily dock. Connect the power adapter to the charging station and plug it into a power outlet.
3. Montage der Seitenbürsten
Turn the robot upside down. Align the side brushes with the corresponding posts on the bottom of the robot and press them down until they click into place. Ensure they are securely attached.
4. Anfangsgebühr
Place the robot onto the charging station. Ensure the charging contacts on the robot align with those on the station. The indicator light on the robot will show its charging status. For first-time use, charge the robot for at least 5-6 hours to ensure the battery is fully conditioned.
Bedienung des Saugroboters
1. Ein-/Ausschalten
Press and hold the power button on the robot for a few seconds to turn it on or off. Alternatively, use the power button on the remote control.

Bild 2: A hand holding the remote control for the Sencor robot vacuum, with the robot and charging station visible in the background, illustrating remote operation.
2. Starten eines Reinigungszyklus
Drücken Sie die "Clean" button on the robot or the remote control to start a cleaning cycle. The robot will automatically select a cleaning path using SENCOR Smart Room technology.
3. Reinigungsmodi
- Automatische Reinigung: The robot navigates and cleans the entire accessible area.
- 30-Minute Program: Ideal for smaller areas or a single room, the robot cleans for approximately 30 minutes before returning to the charging station. Activate this mode via the remote control.
4. Mop Function
To use the mop function, attach a clean textile mop sleeve to the bottom of the robot. The robot will vacuum and mop simultaneously. Ensure the water tank (if applicable, though not explicitly mentioned for this model, it's implied by "laveur") is filled if a wet mop is desired. For this model, it uses an antistatic mop for dust wiping.

Bild 3: The Sencor robot vacuum cleaner actively mopping a hard floor, leaving a clean path behind it.
5. Automatic Docking and Charging
When the battery is low or a cleaning cycle is complete, the robot will automatically return to its charging station. Ensure the charging station is accessible and powered on.

Bild 4: The Sencor robot vacuum cleaner moving from a carpeted area to a hard floor, demonstrating its ability to clean different surfaces and pick up debris.

Bild 5: The Sencor robot vacuum cleaner operating under a sofa, highlighting its ultra-slim 7 cm design for accessing hard-to-reach areas.
Wartung
Regelmäßige Wartung gewährleistet optimale Leistung und verlängert die Lebensdauer Ihres Saugroboters.
1. Den Mülleimer leeren
Press the release button to remove the dust bin. Open the dust bin cover and empty its contents into a trash can. It is recommended to empty the dust bin after each cleaning cycle.
2. Reinigung/Austausch der Filter
Remove the HEPA filter and primary filter from the dust bin. Tap the filters gently to remove dust. The HEPA filter is not washable; replace it every 3-6 months depending on usage. The primary filter can be rinsed with water and air-dried completely before reinstallation.
3. Seitenbürsten reinigen
Periodically remove the side brushes by pulling them upwards. Use the provided cleaning brush or a pair of scissors to remove any tangled hair or debris. Reinstall them securely.
4. Reinigungsmopp-Pads
Remove the textile mop sleeve after each use. Rinse it thoroughly with water and allow it to air dry. Replace mop sleeves when they show signs of wear or reduced effectiveness.
5. Reinigung der Sensoren und Ladekontakte
Wipe the anti-drop sensors, bumper sensors, and charging contacts on both the robot and the charging station with a clean, dry cloth to ensure proper function.
Fehlerbehebung
Sollte Ihr Saugroboter ein Problem haben, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Roboter lässt sich nicht einschalten. | Niedriger Batteriestand; nicht geladen. | Place the robot on the charging station and ensure it is fully charged. |
| Der Roboter lädt nicht. | Charging contacts are dirty; charging station not powered. | Clean charging contacts on both robot and station. Ensure charging station is plugged in and powered. |
| Der Roboter bleibt häufig stecken. | Obstacles in cleaning path; tangled brushes. | Clear the cleaning area of loose cables, small objects. Clean side brushes for tangled hair. |
| Mangelhafte Reinigungsleistung. | Full dust bin; dirty filters; worn brushes. | Empty dust bin. Clean or replace filters. Clean or replace side brushes. |
| Der Roboter kehrt nicht zur Ladestation zurück. | Charging station is blocked or not powered; robot too far from station. | Ensure charging station is accessible and powered. Manually place robot near station to assist docking. |
Technische Daten
| Marke | SENSOR |
| Modellnummer | SRV1550WH |
| Farbe | Weiß |
| Abmessungen (L x B x H) | 29 x 29 x 7 cm (11.4 x 11.4 x 2.7 Zoll) |
| Gewicht | 1.9 Kilogramm (4.19 Pfund) |
| Kapazität des Staubbehälters | 200 Milliliter |
| Bandtage | 220 Volt |
| Material | Plastik |
| Geräuschpegel | 60 Dezibel |
| Akkulaufzeit (Laufzeit) | Bis zu 60 Minuten (1 Stunde) |
| Besondere Merkmale | Automatic docking, Anti-fall, Anti-collision, Automatic stop, Continuous suction, Simultaneous suction and cleaning, Dirt detection sensor, Logical navigation, Programmable, Pet hair pickup, Easy-to-empty dirt container, Cordless, Bagless, Low noise level, Washable primary filter, HEPA filter. |
| Filtertyp | HEPA |
| Controllertyp | Fernbedienung |
Garantie und Support
Sencor offers a satisfaction guarantee for this product. Please refer to your purchase documentation for specific warranty terms and conditions.
- Zufriedenheitsgarantie: A 30-day satisfaction guarantee is offered.
- Ersatzteile: Informationen zur Verfügbarkeit von Ersatzteilen sind derzeit nicht verfügbar.
- For further assistance or technical support, please contact Sencor customer service through their official webWebsite oder die Kontaktinformationen, die Sie bei Ihrem Kauf erhalten haben.





