Minetom BL-HW02

Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector User Manual

Model: BL-HW02

1. Einleitung

Vielen Dank für Ihren Einkauf.asing the Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector. This device is designed to create dynamic and decorative light displays for various occasions, both indoors and outdoors. Featuring multiple color combinations, motion effects, and remote control operation, it offers a versatile lighting solution. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Sicherheitshinweise

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

4. Einrichtung

4.1 Auswahl einer Installationsmethode

The projector offers three installation options: ground-mounted, wall-mounted, or placed on a flat surface.

Minetom laser light projector showing three installation methods: wall-mounted, ground-mounted, and placed on a flat surface.

Image: The Minetom laser light projector can be installed in three ways: wall-mounted, ground-mounted, or placed on a flat surface using the included accessories.

  1. Ground-Mounted: Attach the ground stake to the projector. Insert the stake firmly into soft ground in your desired outdoor location.
  2. An der Wand montiert: Attach the round base to the projector. Secure the base to a wall using appropriate screws (not included) for a stable installation.
  3. Placed on Plane: Attach the round base to the projector. Place the projector on any stable, flat surface indoors or outdoors.

4.2 Stromanschluss

5. Bedienungsanleitung

Once powered on, the projector will begin its default light show. Use the RF remote control to customize the display.

5.1 Fernbedienungsfunktionen

The RF remote control allows you to manage various settings from a distance. Ensure 2*AAA batteries (not included) are installed in the remote.

Diagram of the RF remote control for the Minetom laser light projector, showing buttons for power, timers, color selection, motion, and strobe effects.

Image: RF Remote Control layout with functions for each button.

Funktionen der Fernbedienungstasten
TasteFunktion
EIN/AUSSchaltet den Projektor ein oder aus.
2H / 4H / 6HSets the timer for 2, 4, or 6 hours.
(H) RestoreRestores to default timing (6 hours on, 18 hours off).
FarbzyklusCycles through Green, Blue, Red-Green, Blue-Green, Red-Blue, Red-Green-Blue, and Red-Green-Blue cycle.
AtemmodusActivates a slow fade-in/fade-out effect.
Jumping ModeActivates a rapid color change effect.
S0 (Static)Sets the light display to static (no motion).
S- / S+Adjusts rotation speed (S- for slow, S+ for fast).
R / G / BSelects Red, Green, or Blue light individually.
R/G/B BreathingActivates breathing mode for individual Red, Green, or Blue colors.
R/G/B StrobeActivates strobe mode for individual Red, Green, or Blue colors. Press sequentially to adjust speed (Slow, Medium, Fast, Stop).
R/G/B SteadySets individual Red, Green, or Blue colors to steady (non-flashing).

5.2 Farbkombinationen

The projector supports various color combinations to create diverse effects.

Seven different color combinations displayed by the Minetom laser light projector: Red, Green, Blue, Red Green, Red Blue, Green Blue, and Red Green Blue.

Bild: Examples of the 7 available color combinations.

6. Wasserdichtigkeitsklasse IP65

The projector body is designed with an IP65 waterproof rating, ensuring reliable performance in various weather conditions such as snow, rain, dust, and intense sunlight. It is cold-proof, operating effectively from -30°F to 104°F.

Minetom laser light projector operating outdoors in both rain and snow, demonstrating its IP65 waterproof and cold-proof capabilities.

Image: The projector operating in rainy and snowy conditions, highlighting its IP65 waterproof and cold-proof features.

7. Abdeckungsbereich

The projector can cover a significant area, illuminating indoor ceilings, walls, or outdoor walls, gardens, lawns, trees, and rooftops. From a distance of 32.8 feet, it can cover approximately 3229.17 square feet.

Diagram showing the Minetom laser light projector's coverage area increasing with distance, from 226 sq ft at 10 ft to 3541 sq ft at 40 ft.

Image: Coverage area chart illustrating how the projected area expands with increased distance from the surface.

8. Wartung

9. Fehlerbehebung

Häufige Probleme und Lösungen
ProblemLösung
Der Projektor lässt sich nicht einschalten.
  • Stellen Sie sicher, dass das Netzteil fest in eine funktionierende Steckdose eingesteckt ist.
  • Prüfen Sie, ob die Batterien der Fernbedienung richtig eingelegt und nicht leer sind.
  • Press the ON/OFF button on the remote.
Die Fernbedienung reagiert nicht.
  • Replace the remote control batteries (2*AAA, not included).
  • Stellen Sie sicher, dass sich keine Hindernisse zwischen Fernbedienung und Projektor befinden.
  • Confirm you are within the remote's operating range.
Die Lichtausbeute ist schwach oder ungleichmäßig.
  • Reinigen Sie die Projektorlinse, falls sie verschmutzt aussieht.
  • Ensure the projector is not operating in extreme temperatures outside its specified range.
Multiple projectors interfere with each other.
  • This can occur with multiple RF remote-controlled devices. Try to operate one projector at a time, or position them further apart.

10. Spezifikationen

BesonderheitDetail
ModellnummerBL-HW02
MarkeMinetom
FarbeRot Grün Blau
MaterialPlastik
AusführungProjektor
LichtquellentypLeuchtdiode
StromquelleKabelgebundene Elektrik
MontagetypBodenmontage, Wandmontage
Technische Daten2.75 Zoll L x 2.75 Zoll B x 11.02 Zoll H
Artikelgewicht14 Unzen
Abstrahlwinkel120 Grad
WasserdichtigkeitIP65
Betriebstemperatur-30°F bis 104°F
Coverage Area (approx.)3229.17 sq ft at 32.8 ft distance

11. Garantie und Support

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Minetom webBewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.

Zugehörige Dokumente - BL-HW02

Vorview Minetom S14 Solar-Lichterketten – Benutzerhandbuch und Sicherheitshandbuch
Umfassende Anleitung für die Minetom S14 Solar-Lichterkette mit Installation, Bedienung, Sicherheitsvorkehrungen, Fehlerbehebung und Garantieinformationen. Erfahren Sie, wie Sie Ihre solarbetriebene Lichterkette installieren und warten.
Vorview BlissLights BL-15 Laserprojektor – Benutzerhandbuch, Spezifikationen und Garantie
Ausführliche Bedienungsanleitung für den BlissLights BL-15 Laserprojektor. Enthält Informationen zu Einrichtung, Bedienung, Sicherheitshinweisen, Produktspezifikationen, Installationstipps und eingeschränkter Garantie.
Vorview BlissLights BL-50 Laserprojektor – Benutzerhandbuch und Spezifikationen
Ausführliche Bedienungsanleitung für den Laserprojektor BlissLights BL-50, die Einrichtung, Bedienung, Sicherheit, technische Daten und die eingeschränkte Garantie abdeckt.
Vorview Panasonic Netzwerkkameras der Serie BL-VT164/BL-VP100 – Bedienungsanleitung
Ausführliche Bedienungsanleitung für die Netzwerkkameras der Panasonic BL-VT164- und BL-VP100-Serie. Beinhaltet Einrichtung, Konfiguration, Überwachung und Wartung.
Vorview Benutzerhandbuch für die smarte WLAN-Musik-Sternenleuchte - BL-XK01
Ausführliches Benutzerhandbuch für die Smart Wi-Fi Music Star Light (Modell BL-XK01) der Shenzhen Bolong Technology Co., Ltd., mit detaillierten Informationen zu Einrichtung, Bedienung, App-Steuerung über „Smart Life“, Sprachbefehlen, Fehlerbehebung und Sicherheitsvorkehrungen.
Vorview BL-3D01 Benutzerhandbuch: Einrichtung, Betrieb und Spezifikationen
Umfassendes Benutzerhandbuch für das Projektionsgerät BL-3D01 mit detaillierten Informationen zum Auspacken, Einrichten, zu Tastenfunktionen, Fernbedienungsvorgängen, Spezifikationen und rechtlichen Informationen.