1. Produktüberschreitungview
The CYCLAMI Bike Speed/Cadence Sensor is a versatile device designed to track your cycling performance. It supports both speed and cadence measurements, connecting wirelessly via ANT+ and Bluetooth to a wide range of cycling computers and fitness applications. Its compact and lightweight design, combined with IPX6 waterproofing, makes it suitable for various riding conditions.
Image 1.1: The CYCLAMI Bike Speed/Cadence Sensor, a compact device for tracking cycling data.
Hauptmerkmale:
- Dual-Modus: Functions as either a speed sensor or a cadence sensor. Note: Two sensors are required for simultaneous speed and cadence data.
- Kabellose Verbindung: Supports ANT+ and Bluetooth protocols for broad compatibility.
- Breite Kompatibilität: Works with popular apps like Zwift, Rouvy, Xoss, Blackbird, Samsung Health, Apple Watch, TrainingPeaks, Navihood, Keep, Nike+, Gudong, and more.
- Einfache Installation: Simple attachment to the wheel hub for speed or crank arm for cadence using rubber bands.
- Langlebiges Design: IPX6 waterproof rating and lightweight (8.1g).
- Lange Akkulaufzeit: Bis zu 270 Stunden Dauerbetrieb.
2. Einrichtung und Installation
2.1 Batterieaktivierung
Before first use, remove the insulating sheet located underneath the battery. This activates the sensor for operation.
Image 2.1: Locate and remove the insulating sheet from the battery compartment before use.
2.2 Switching Between Speed and Cadence Modes
The sensor features a one-touch switch to toggle between speed and cadence modes. Press the small button on the sensor to switch modes. The LED indicator will change color to confirm the active mode:
- Grünes Licht: Geschwindigkeitsmodus
- Weißes Licht: Trittfrequenzmodus
After switching modes, you may need to reconnect the sensor to your receiving device or application.
Image 2.2: The sensor's LED indicator shows green for speed mode and white for cadence mode.
2.3 Installation for Speed Mode
- Switch the sensor to Speed Mode (Green LED).
- Snap the curved rubber patch onto the back of the sensor.
- Tie the sensor securely to the front or rear wheel hub using the provided rubber band.
- Open your mobile riding app or cycling computer to search for the device.
Image 2.3: Step-by-step guide for installing the sensor in speed mode on the wheel hub.
2.4 Installation for Cadence Mode
- Switch the sensor to Cadence Mode (White LED).
- Snap the curved rubber patch onto the back of the sensor.
- Tie the sensor securely to the pedal crank arm using the provided rubber band.
- Open your mobile riding app or cycling computer to search for the device.
Image 2.4: Step-by-step guide for installing the sensor in cadence mode on the crank arm.
3. Bedienungsanleitung
3.1 Pairing with Devices and Applications
The CYCLAMI sensor supports both Bluetooth and ANT+ protocols, allowing it to connect with a wide range of cycling computers, smartwatches, and fitness applications. Ensure your device's Bluetooth or ANT+ is enabled and follow its instructions to search for and pair with the sensor.
Image 3.1: The sensor is compatible with numerous applications and devices via BLE 5.0 and ANT+ protocols.
3.2 Datenübertragung
Once paired, the sensor will automatically transmit real-time speed or cadence data to your connected device. Ensure the sensor is within range of your device for continuous data reception.
4. Wartung
4.1 Abdichtung
The sensor has an IPX6 waterproof rating, meaning it is protected against powerful water jets. It can withstand rain and splashes during cycling. However, it is not designed for submersion in water for extended periods.
Image 4.1: The sensor's IPX6 rating ensures protection against water splashes during rides.
4.2 Batteriewechsel
The sensor is powered by a replaceable battery, offering up to 270 hours of battery life. When the battery is low, the sensor's performance may degrade or it may stop transmitting data. Refer to the sensor's casing for battery type and replacement instructions. Ensure proper polarity when inserting a new battery.
4.3 Reinigung
Clean the sensor periodically with a soft, damp Tuch. Vermeiden Sie die Verwendung von scheuernden Reinigern oder Lösungsmitteln, die das Material beschädigen könnten.asing oder elektronische Bauteile.
5. Fehlerbehebung
5.1 Sensor Not Activating/No LED Light
- Check Battery Insulation: Ensure the plastic insulating sheet has been removed from under the battery.
- Batteriestand: Ersetzen Sie die Batterie, wenn sie leer ist.
- Batterieausrichtung: Vergewissern Sie sich, dass die Batterie mit der richtigen Polarität eingelegt ist.
5.2 Difficulty Pairing with Device
- Sensormodus: Confirm the sensor is in the correct mode (speed or cadence) for the data you wish to receive.
- Device Bluetooth/ANT+: Ensure Bluetooth or ANT+ is enabled on your receiving device.
- Nähe: Keep the sensor close to your receiving device during the pairing process.
- Interferenz: Halten Sie Abstand von anderen elektronischen Geräten, die Störungen verursachen könnten.
- Neustart: Versuchen Sie, sowohl den Sensor (durch Entfernen und Wiedereinsetzen der Batterie) als auch Ihr Empfangsgerät neu zu starten.
5.3 Ungenaue Messwerte
- Installation: Verify the sensor is securely mounted and correctly positioned according to the installation instructions for the chosen mode (speed on hub, cadence on crank arm).
- Tire Size Calibration (Speed Mode): Ensure your cycling computer or app has the correct wheel circumference entered for accurate speed readings.
- Hindernisse: Check for any physical obstructions between the sensor and the magnet (if applicable, though this sensor is magnet-less) or the receiving device.
6. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Marke | CYCLAMI |
| Modellname | CYCLAMI C1 |
| Technische Daten | 1.3 Zoll L x 0.39 Zoll B x 1.1 Zoll H |
| Artikelgewicht | 8.1 Gramm |
| Sensortyp | Speed Sensor, Cadence Sensor |
| Konnektivitätstechnologie | ANT+, Bluetooth |
| Internationale Schutzbewertung | IPX6 |
| Akkulaufzeit | Bis zu 270 Stunden |
| Eingabe der menschlichen Schnittstelle | Schaltflächen |
| Im Lieferumfang enthaltene Komponenten | Bike sensor |
7. Garantie und Support
7.1 Garantieinformationen
Dieses Produkt wird mit einem 1 Jahre warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
7.2 Kundendienst
For technical assistance, troubleshooting, or warranty inquiries, please refer to the seller's contact information on the platform where the product was purchased. You may also visit the official CYCLAMI brand store for additional resources and support.
CYCLAMI Store: https://www.amazon.com/stores/CYCLAMI/page/A2CA0EF8-4594-4102-A438-7FBC9833393A
