Einführung
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HALLOMOTOR Speed Unlimited 600C TFT Display. This advanced display is designed to seamlessly integrate with various Bafang mid-drive motors, including M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, and M820 models. It utilizes CAN protocol for reliable communication and offers a vibrant TFT screen for clear data monitoring and customizable settings.
Produkt überview
Abbildung 1: Vorderseite view of the HALLOMOTOR 600C TFT Display, showing the screen and control buttons.
Figure 2: The 600C TFT Display, highlighting its CAN version and compatibility with Bafang M200, M300, M400, M410, M420, M500, M510, M560, M600, M620, M800, and M820 motors.
Figure 3: The 600C TFT Display mounted on bicycle handlebars, demonstrating its 2.4-inch HD screen, multi-language support, multi-mode interface, and IP65 waterproof rating.
Figure 4: An installed view of the 600C TFT Display on an electric bicycle, showing its compact design and handlebar mounting.
Setup und Installation
1. Packungsinhalt
- 600C TFT Display Unit
- Mounting Bracket (integrated)
- Verbindungskabel
2. Montage des Displays
The 600C TFT Display is designed for handlebar mounting. Ensure the handlebar diameter is compatible with the integrated clamp (approximately Ø22.2mm as per dimensions). Position the display centrally for optimal viewing and access to buttons.
- Loosen the mounting screw on the display's integrated clamp.
- Place the display on your bicycle's handlebar in the desired position.
- Ziehen Sie die Befestigungsschraube fest an, um sicherzustellen, dass das Display stabil sitzt und sich nicht frei drehen kann. Nicht zu fest anziehen.
Figure 5: Technical dimensions of the 600C TFT Display, showing measurements in millimeters for width, height, and handlebar clamp diameter (Ø22.2mm).
3. Elektrische Verbindung
Connect the display's cable to the corresponding port on your Bafang mid-drive motor system. Ensure the connectors are clean and dry before mating. The display uses a specific CAN protocol connector (often green, as shown in product images).
- Locate the display connection port on your Bafang motor's wiring harness.
- Align the male and female connectors of the display cable and the motor harness.
- Push firmly until the connectors click into place, ensuring a secure and waterproof seal.
- Route the cable neatly along the handlebars and frame, securing it with cable ties to prevent snagging or damage.
Bedienungsanleitung
1. Display Layout and Buttons
The 600C TFT display features a clear screen and intuitive button layout for easy control.
- Power Button (middle): Schaltet das Display und das E-Bike-System ein/aus.
- Aufwärtstaste (+): Increases assist level, navigates menus upwards, or increases values.
- Abwärtstaste (-): Decreases assist level, navigates menus downwards, or decreases values.
- M-Taste (Modus): Cycles through display information, enters/exits settings menus.
2. Grundlegende Bedienung
- Ein-/Ausschalten: Press and hold the Power button for approximately 2 seconds to turn the system on or off.
- Changing Assist Levels: Use the Up (+) and Down (-) buttons to adjust the motor's pedal assist level. The current level will be displayed on the screen.
- Cycling Display Information: Press the M button briefly to cycle through various data displays such as speed (current, average, max), distance (trip, total), battery level, and power output.
3. Advanced Settings and Interface Modes
The 600C display supports multiple interface modes and customizable settings. Refer to the on-screen menu for specific options.
Abbildung 6: Bspamples of multiple interface modes available on the 600C TFT Display, including digital, simulation, basic information, and detailed information views.
- Zugriff auf die Einstellungen: Typically, pressing and holding the M button, or a combination of buttons, will enter the settings menu. Follow the on-screen prompts.
- Anpassung: Within the settings, you may be able to adjust parameters such as wheel diameter, speed unit (km/h or mph), battery voltage, backlight brightness, and password protection.
- Schnittstellenmodi: The display offers various visual layouts for data presentation. Navigate to the 'Interface Mode' setting to select your preferred view.
Wartung
- Reinigung: The display is IP65 waterproof. Use a soft, damp Tuch zum Abwischen des Bildschirms und casing. Avoid abrasive cleaners or solvents. Do not use high-pressure water jets directly on the display.
- Lagerung: When not in use for extended periods, store the display and e-bike in a cool, dry place, away from direct sunlight and extreme temperatures.
- Kabelinspektion: Periodically check the display cable and connectors for any signs of wear, damage, or corrosion. Ensure connections remain secure.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Display schaltet sich nicht ein. | Low battery, loose connection, system fault. | Check e-bike battery charge. Ensure all cables are securely connected. If problem persists, consult a technician. |
| No speed or distance data. | Speed sensor issue, loose motor connection. | Check speed sensor alignment and connection. Verify motor connection. |
| Auf der Anzeige erscheint ein Fehlercode. | Systemstörung. | Note the error code and refer to your motor's manual or contact support for specific meaning and resolution. |
| Tasten reagieren nicht. | Vorübergehender Softwarefehler, physischer Schaden. | Try restarting the display (power off and on). Inspect buttons for physical damage. |
Technische Daten
- Modellname: 600C TFT display with CAN protocol
- Marke: HALLOMOTOR
- Anzeigetyp: TFT (Thin-Film Transistor)
- Bildschirmgröße: 2.4-inch (HD display screen)
- Protokoll: CAN (Controller Area Network)
- Kompatibilität: Bafang Mid Drive Motors (M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, M820)
- Material: Plastik
- Farbe: Schwarz
- Montageart: Handlebar Mount (Ø22.2mm)
- Wasserdichtigkeit: IP65
- Enthaltene Komponenten: LCD 600C CAN
Garantie und Support
Garantieinformationen
This product comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your purchase or contact HALLOMOTOR directly. Keep your proof of purchase for warranty claims.
Kundenservice
If you encounter any issues not covered in this manual or require further assistance, please contact the seller or HALLOMOTOR customer support. Provide your product model number and a detailed description of the issue for efficient service.
