Xtreme Smart Wi-Fi Window & Door Sensor User Manual

Einführung

This manual provides instructions for the installation, operation, and maintenance of your Xtreme Smart Wi-Fi Window & Door Sensor. This device is designed to enhance home security by detecting the opening and closing of windows and doors, sending instant notifications to your smartphone.

Sicherheitshinweise

• Setzen Sie das Gerät keinen extremen Temperaturen, direkter Sonneneinstrahlung oder Feuchtigkeit aus.
• Versuchen Sie nicht, das Gerät selbst zu zerlegen oder zu reparieren. Dadurch erlischt die Garantie.
• Bewahren Sie Batterien außerhalb der Reichweite von Kindern auf. Bei Verschlucken sofort einen Arzt aufsuchen.
• Batterien sind gemäß den örtlichen Vorschriften zu entsorgen. Alte und neue Batterien dürfen nicht zusammen verwendet werden.
• Ensure the installation surface is clean and dry for proper adhesive attachment.

Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• Xtreme Smart Wi-Fi Window & Door Sensor (Main Unit)
• Xtreme Smart Wi-Fi Window & Door Sensor (Magnetic Contact)
• Benutzerhandbuch (dieses Dokument)

Image: The main sensor unit and the smaller magnetic contact unit.

Installationshandbuch

1. Einlegen der Batterie

1. Gently slide open the battery cover on the main sensor unit.
2. Legen Sie zwei AAA-Batterien (nicht im Lieferumfang enthalten) in das Batteriefach ein und achten Sie dabei auf die richtige Polarität (+/-).
3. Schließen Sie die Batterieabdeckung fest.

Image: The main sensor unit with its battery compartment open, showing where to insert two AAA batteries.

2. App-Download und Kontoerstellung

1. Laden Sie die Xtreme Connect Home App from the Apple App Store (for iOS 11 or higher) or Google Play Store (for Android 7.0 or higher).
2. Öffnen Sie die App und folgen Sie den Anweisungen auf dem Bildschirm, um ein neues Konto zu erstellen oder sich anzumelden, falls Sie bereits eines besitzen.

Image: The product box illustrating the Xtreme Connect Home App download options for both iOS and Android devices.

3. Gerätekopplung

1. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The sensor does not support 5GHz networks.
2. In the Xtreme Connect Home App, tap the "+" icon to add a new device.
3. Select "Sensor" or "Door/Window Sensor" from the device list.
4. Follow the app's instructions to put the sensor into pairing mode (usually involves pressing and holding a button on the sensor until an indicator light flashes).
5. Confirm the Wi-Fi network and enter the password in the app. The sensor will then connect to your home network.
6. Once successfully paired, you can name your sensor within the app (e.g., "Front Door," "Bedroom Window").

4. Physische Installation

The sensor consists of two parts: a main unit and a smaller magnetic contact. These two parts must be installed close to each other (within 1 cm) on a door or window frame.

1. Choose a clean, dry, and flat surface on your door or window frame.
2. Peel off the protective backing from the adhesive on both the main unit and the magnetic contact.
3. Attach the main unit to the fixed part of the door/window frame.
4. Attach the magnetic contact to the moving part of the door/window (the door or window itself), aligning it with the main unit so they are no more than 1 cm apart when the door/window is closed.
5. Test the installation by opening and closing the door/window. The app should register the change in status.

Image: Left: The sensor installed on a window sill with the window closed. Right: The sensor detecting an open window, with the magnetic contact separated from the main unit.

Betrieb

Monitoring Door/Window Status

Once installed and paired, the Xtreme Smart Wi-Fi Window & Door Sensor will continuously monitor the open/closed status of your designated entry point. When the magnetic contact separates from the main unit (door/window opens), the sensor will detect this change.

Sofortige Benachrichtigungen

Upon detecting an open or close event, the sensor will send an instant notification to your smartphone via the Xtreme Connect Home App. Ensure app notifications are enabled in your phone's settings to receive these alerts.

Fernzugriff

Du kannst view the current status of your sensor (open or closed) and review event history from anywhere using the Xtreme Connect Home App, provided your smartphone has an internet connection.

Smart Scenes Integration

The Xtreme Connect Home App allows you to create "Smart Scenes" to automate actions based on sensor activity. For exampauf:

• "If door opens, then turn on living room lights."
• "If window opens after 10 PM, then send an alert to family members."

Explore the "Smart Scenes" section within the app to customize your home automation.

Wartung

Batteriewechsel

The sensor is powered by two AAA batteries. When the battery level is low, you may receive a notification via the Xtreme Connect Home App. To replace batteries:

1. Gently slide open the battery cover on the main sensor unit.
2. Entfernen Sie die alten Batterien.
3. Insert two new AAA alkaline batteries, ensuring correct polarity (+/-).
4. Schließen Sie die Batterieabdeckung fest.

Note: The sensor is designed for up to four months of battery life under normal usage conditions.

Reinigung

Reinigen Sie den Sensor mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reinigungsmittel oder Scheuermittel, da diese das Gerät beschädigen können.

Fehlerbehebung

Technische Daten

Garantie und Support

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Xtreme Digital Lifestyle Accessories website. Do not attempt to return the product to the retailer without first contacting customer support, as per manufacturer guidelines.

Hersteller: Xtreme

Marke: EXTREME DIGITALE LIFESTYLE-ACCESSOIRES