Fuxtec FX-E1VC20 Cordless Wet/Dry Vacuum Cleaner with Blower Function

1. Einleitung

This manual provides essential information for the safe and efficient operation of your Fuxtec FX-E1VC20 cordless wet/dry vacuum cleaner. Please read these instructions carefully before initial use and retain them for future reference. This device is designed for versatile cleaning tasks, both indoors and outdoors, including homes, gardens, vehicles, campers, basements, and workshops.

The FX-E1VC20 features a 10-liter tank, a compact design, and an integrated handle for maximum portability. It includes both vacuuming and blowing functions to address various cleaning needs, from dust and dirt to liquids.

2. Sicherheitshinweise

Beachten Sie beim Gebrauch elektrischer Geräte stets grundlegende Sicherheitsvorkehrungen, um das Risiko von Bränden, Stromschlägen und Verletzungen zu verringern.

• Lesen Sie alle Anweisungen, bevor Sie das Gerät in Betrieb nehmen.
• Betreiben Sie den Staubsauger nicht ohne eingesetzte Filter.
• Ensure the battery pack is fully charged before use (battery and charger sold separately for 'SOLO' variant).
• Brennbare oder entzündliche Flüssigkeiten, heiße Asche oder scharfe Gegenstände dürfen nicht eingesaugt werden.
• Halten Sie Haare, lose Kleidung, Finger und alle Körperteile von Öffnungen und beweglichen Teilen fern.
• Use only Fuxtec recommended accessories and replacement parts.
• Bewahren Sie das Gerät bei Nichtgebrauch an einem trockenen Ort in Innenräumen auf.
• Dieses Gerät ist nicht für die Verwendung durch Personen mit eingeschränkten physischen, sensorischen oder geistigen Fähigkeiten oder mangelnder Erfahrung und Kenntnis bestimmt, es sei denn, sie werden von einer für ihre Sicherheit verantwortlichen Person beaufsichtigt oder in die Verwendung des Geräts eingewiesen.

3. Packungsinhalt

Verify that all items are present in your package. If any parts are missing or damaged, contact Fuxtec customer support.

• Fuxtec FX-E1VC20 Cordless Wet/Dry Vacuum Cleaner Unit
• Flexibler Schlauch
• Universal-Bodenbürste
• 2-in-1 Nozzle (Crevice and Brush Tool)
• Filterkorb
• Schaumstofffilter (für Nasssaugen)
• Fabric Filter (for dry vacuuming)

Note: For the 'SOLO' variant (FX-E1VC20 SOLO), the battery and charger are not included and must be purchased separately.

Image: All included accessories for the Fuxtec FX-E1VC20 vacuum cleaner, including hose, filters, floor brush, and 2-in-1 nozzle.

Image: Fuxtec FX-E1VC20 cordless wet/dry vacuum cleaner, illustrating that battery and charger are not included.

4. Produktüberschreitungview

Familiarize yourself with the main components of your Fuxtec FX-E1VC20 vacuum cleaner.

Image: Fuxtec FX-E1VC20 cordless wet/dry vacuum cleaner with hose and floor nozzle attached.

Bild: Oben view of the Fuxtec FX-E1VC20 vacuum cleaner, highlighting the handle, power switch, and accessory storage slots.

• Integrierter Griff: Für den einfachen Transport.
• Stromschalter: Easily accessible for turning the unit on/off.
• Schnellverschlusssystem: For easy access to the 10L tank for cleaning and maintenance.
• Hose Connection Ports: For vacuuming and blowing functions.
• Accessory Storage Slots: Conveniently store nozzles and hose.
• Schwimmerventil: Safety system to prevent overfilling during wet vacuuming.

5. Einrichtung

1. Einlegen der Batterie: Open the battery compartment. Insert a charged Fuxtec 20V battery pack (not included with 'SOLO' variant) into the slot until it clicks into place. Close the compartment securely.
2. Filterinstallation:
   • Für Trockensaugen: Place the fabric filter over the filter basket.
   • Für Nasssaugen: Remove the fabric filter and install the foam filter over the filter basket. Ensure it is properly seated to prevent liquid from entering the motor.
3. Hose and Accessory Attachment:
   • Attach the flexible hose to the suction port on the front of the unit for vacuuming.
   • Select the desired nozzle (universal floor brush or 2-in-1 nozzle) and attach it to the end of the flexible hose.
   

   Image: Fuxtec FX-E1VC20 vacuum cleaner with the floor brush attachment and hose extended.
   

   Abbildung: Seite view of the Fuxtec FX-E1VC20 vacuum cleaner with the crevice tool attached to the hose.

6. Bedienungsanleitung

6.1. Staubsaugen

1. Ensure the correct filter is installed for either wet or dry vacuuming.
2. Connect the flexible hose to the front suction port.
3. Bringen Sie für die Reinigungsaufgabe die passende Düse an.
4. Drücken Sie den Netzschalter in die Position „EIN“.
5. Guide the nozzle over the surface to be cleaned.
6. For wet vacuuming, the float valve will automatically stop suction when the tank is full. Turn off the unit and empty the tank immediately.

6.2. Gebläsefunktion

1. Disconnect the flexible hose from the front suction port.
2. Attach the flexible hose to the blower port, typically located at the rear or side of the unit.
3. Drücken Sie den Netzschalter in die Position „EIN“.
4. Direct the airflow to clear debris from surfaces.

7. Wartung

Regelmäßige Wartung gewährleistet optimale Leistung und verlängert die Lebensdauer Ihres Staubsaugers.

7.1. Den Tank leeren

1. Turn off the vacuum cleaner and remove the battery.
2. Use the quick-release latches to detach the motor head from the tank.
3. Carefully lift the motor head and empty the contents of the 10-liter tank.
4. Reinigen Sie das Innere des Tanks gegebenenfalls mit Wasser und einem milden Reinigungsmittel und trocknen Sie ihn anschließend gründlich ab.

7.2. Filter reinigen

• Gewebefilter: Shake off dust or gently brush clean. If heavily soiled, wash with water and mild soap, then allow to air dry completely before reinstallation.
• Schaumstofffilter: Rinse with water and mild soap. Squeeze out excess water and allow to air dry completely before reinstallation.
• Never operate the vacuum cleaner with a wet filter for dry vacuuming.

7.3. Allgemeine Reinigung

Wischen Sie die Außenseite des Staubsaugers mitamp Mit einem Tuch abwischen. Keine scharfen Chemikalien oder Scheuermittel verwenden. Vor der Lagerung sicherstellen, dass alle Teile trocken sind.

8. Fehlerbehebung

If you encounter issues with your Fuxtec FX-E1VC20, refer to the following common problems and solutions.

If the problem persists after attempting these solutions, please contact Fuxtec customer support.

9. Spezifikationen

10. Garantie und Support

For warranty information, technical support, or to order replacement parts, please refer to the official Fuxtec website or contact your local Fuxtec dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

Fuxtec is committed to providing high-quality products and customer satisfaction. Do not attempt to repair the device yourself; unauthorized repairs may void your warranty.