Wichtige Sicherheitsinformationen
Bitte lesen und verstehen Sie alle Anweisungen sorgfältig, bevor Sie dieses Produkt zusammenbauen und verwenden. Die Nichtbeachtung dieser Anweisungen kann zu Verletzungen oder Produktschäden führen. Bewahren Sie diese Anleitung zum späteren Nachschlagen auf.
- Ensure the umbrella is securely anchored with an appropriate base (sold separately) to prevent tipping, especially in windy conditions.
- Do not use the umbrella in strong winds or severe weather. Close and secure the umbrella when not in use or during adverse weather.
- Keep children and pets away from the umbrella during assembly and operation.
- Stellen Sie den Regenschirm nicht in die Nähe von offenen Flammen oder Wärmequellen.
- Überprüfen Sie regelmäßig alle Bauteile auf Verschleiß. Beschädigte Teile müssen umgehend ausgetauscht werden.
Packungsinhalt
Vor Beginn der Montage prüfen Sie, ob alle Komponenten vorhanden sind:
- Schirmdach mit Streben
- Oberer Polabschnitt
- Lower Pole Section (with crank mechanism)
- Endgültig
- Bedienungsanleitung
Note: Umbrella base and furniture are not included and must be purchased separately. This umbrella is not suitable for tables with hole diameters smaller than 1.5 inches.
Montageanleitung
Schritt 1: Komponenten auspacken
Carefully remove all parts from the packaging. Lay them out on a clean, flat, soft surface to prevent scratches.
Schritt 2: Montieren Sie die Stange
Connect the upper pole section to the lower pole section. Ensure the connection is firm and secure. The lower pole section contains the crank mechanism for opening and closing the umbrella.

Image: The convenient rotating handle on the umbrella pole, used for opening and closing the canopy.
Step 3: Attach Umbrella Canopy
Carefully place the umbrella canopy onto the assembled pole. Ensure the canopy slides down completely and is properly seated. Screw the finial onto the top of the umbrella pole to secure the canopy.

Image: The elegant finial design at the apex of the umbrella, providing a finishing touch.
Step 4: Secure the Umbrella
Insert the assembled umbrella pole into a suitable umbrella base (sold separately). Ensure the base is heavy enough to provide stability for an 8' x 8' umbrella. Tighten any securing knobs on the base to hold the pole firmly in place. The pole diameter is 1.5 inches, suitable for table holes larger than 1.5 inches.

Image: Size information for the 8x8 ft umbrella, indicating a 1.5-inch pole diameter.
Betrieb
Den Regenschirm öffnen
Rotate the crank handle clockwise to extend the umbrella canopy. Continue cranking until the canopy is fully open and taut.
Den Regenschirm schließen
Rotate the crank handle counter-clockwise to retract the umbrella canopy. Ensure the canopy is fully closed and secured when not in use.
Anpassen der Neigung
This umbrella features a 30° rotation with adjustable tilt. Locate the tilt adjustment mechanism on the pole (typically a button or lever). Press the button or engage the lever and gently tilt the canopy to your desired angle. Release the button/lever to lock the tilt in place. This allows for optimal sun protection throughout the day.

Image: The multi-angle adjustment feature, allowing the canopy to tilt up to 30 degrees for flexible shade.
Wartung
- Reinigung des Baldachins: Clean the 200 GSM premium fabric canopy with mild soap and water. Rinse thoroughly and allow to air dry completely before closing or storing. Do not use harsh chemicals or abrasive cleaners.
- Rahmen reinigen: Wipe the champagne aluminum frame with a damp cloth. Aluminum is durable and resistant to rust and corrosion.
- Lagerung: When not in use for extended periods, especially during off-season or severe weather, close the umbrella and store it in a dry, protected area. A protective cover (sold separately) is recommended.
- Inspektion: Periodically check all screws, bolts, and moving parts to ensure they are tight and functioning correctly.

Image: Close-up of the premium 200 GSM fabric, known for its fade-resistance and durability.

Bild: View of the umbrella's robust aluminum ribs, designed for enhanced stability.
Fehlerbehebung
- Regenschirm öffnet/schließt nicht reibungslos: Check for any obstructions in the canopy or crank mechanism. Ensure the pole sections are securely connected. Apply a silicone-based lubricant to moving parts if necessary.
- Umbrella unstable: Verify that the umbrella base is adequately weighted for the umbrella size. Ensure the pole is fully inserted and secured in the base. Do not use in high winds.
- Canopy fading: While the fabric is fade-resistant, prolonged exposure to intense sunlight can still cause some fading over time. Regular cleaning and using a protective cover when not in use can help prolong its color.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | LILA BLATT |
| Modell | 8' x 8' Square Patio Umbrella |
| Form | Quadrat |
| Rahmenmaterial | Aluminium |
| Schaftmaterial | Aluminium |
| Griffmaterial | Gummi |
| Baldachinstoff | 200 GSM Premium Fabric |
| Besonderheit | UV Resistant, 30° Rotation with Adjustable Tilt |
| Empfohlene Verwendung | Patio, Deck, Garden, Poolside |
| Mastdurchmesser | 1.5 Zoll |
Garantie und Support
PURPLE LEAF products are manufactured to high-quality standards. For warranty information, product support, or to purchase replacement parts, please contact PURPLE LEAF customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can typically find support information on the official PURPLE LEAF weboder über den Einzelhändler, bei dem das Produkt gekauft wurde.





