LEDVANCE Flash Car Emergency Light User Manual

1. Produktüberschreitungview

The LEDVANCE Flash Car Emergency Light is a versatile mobile lighting device designed for outdoor use, particularly in emergency situations. It features a robust aluminum housing and integrates essential tools for roadside safety.

Key features include a glass hammer for breaking windows and a seat belt knife for cutting seat belts, enhancing its utility in critical moments. The light offers multiple operating modes for various lighting needs.

This product is classified as a surrounding product, meaning its included light source(s) can be disassembled for separate verification. The light source within this device is of energy efficiency class G.

Image: The LEDVANCE Flash Car Emergency Light, a compact, black, cylindrical device with a light at one end and a textured grip, designed for emergency use.

2. Sicherheitshinweise

• Batteriesicherheit: Use only the specified battery type (4 AAA batteries). Do not mix old and new batteries, or different types of batteries. Ensure correct polarity when inserting batteries. Remove batteries if the device will not be used for an extended period.
• Notfallwerkzeuge: The glass hammer and seat belt knife are sharp and designed for emergency use only. Handle with extreme care to prevent injury. Keep out of reach of children.
• Lichtquelle: Schauen Sie nicht direkt in den Lichtstrahl, da dies zu vorübergehenden Sehbeeinträchtigungen führen kann.
• Umgebungsbedingungen: This device is designed for outdoor use but should not be submerged in water. Avoid extreme temperatures.

3. Packungsinhalt

Bitte prüfen Sie das Paket auf folgende Artikel:

• 1 x LEDVANCE Flash Car Emergency Light (Model: FLASHL CAR BTRY EM FS1 LEDV)

4. Einrichtung

4.1 Einlegen der Batterie

1. Locate the battery compartment. This is typically found by twisting or unscrewing a section of the light's body.
2. Insert 4 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Verschließen Sie das Batteriefach sorgfältig.

5. Bedienungsanleitung

5.1 Schaltmodi

The LEDVANCE Flash Car Emergency Light features a convenient button for switching between its four operating modes:

• 1. Drücken: Activates bright light mode (100 lumens).
• 2. Drücken: Switches to soft light mode (70 lumens).
• 3. Drücken: Activates SOS mode (Morse code for SOS).
• 4. Drücken: Activates flashing mode.
• Subsequent presses will cycle through the modes or turn the light off, depending on the model's specific sequence.

5.2 Adjusting Light Beam Angle

The angle of the light beam can be adjusted by turning the lens of the device. Rotate the lens clockwise or counter-clockwise to achieve the desired focus or spread of light.

5.3 Akkulaufzeit

The light provides approximately 1.5 hours of operation at full brightness (100 lumens) with fresh batteries.

6. Wartung

• Reinigung: Wischen Sie das Gerät mit einem weichen, damp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
• Batteriewechsel: Replace all 4 AAA batteries when the light output diminishes or the device stops functioning. Refer to Section 4.1 for battery installation.
• Lagerung: Store the light in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

7. Fehlerbehebung

• Licht geht nicht an:
  • Prüfen Sie, ob die Batterien korrekt und mit der richtigen Polarität eingelegt sind.
  • Alte oder leere Batterien sollten durch neue ersetzt werden.
  • Stellen Sie sicher, dass das Batteriefach fest verschlossen ist.
• Das Licht ist schwach oder flackert:
  • Möglicherweise sind die Batterien schwach. Ersetzen Sie sie durch neue.

8. Spezifikationen

9. Garantie und Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact LEDVANCE customer service directly. Keep your proof of purchase for warranty claims.