Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your APPECK Permanent Outdoor Lights (Model C5109-C). These smart RGBW string lights are designed for outdoor use, offering customizable lighting effects, app and remote control, and compatibility with voice assistants.
Image: APPECK Permanent Outdoor Lights C5109-C, illustrating the product and its control methods.
Sicherheitshinweise
- Stellen Sie vor der Installation oder Wartung sicher, dass die Stromversorgung unterbrochen ist.
- This product is designed for outdoor use with an IP65 waterproof rating for the string lights and control box. However, avoid submerging the product in water.
- Do not cut the string lights. The total length should not exceed 100ft.
- Verwenden Sie nur das mitgelieferte Netzteil.
- Die Fernbedienung benötigt 2 AAA-Batterien (nicht im Lieferumfang enthalten).
- For optimal performance and safety, install the lights 2-4 inches away from the wall surface.
Packungsinhalt
Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:
- 16.4ft Light String x 6
- Netzteil x 1
- Steuerkasten x 1
- Fernbedienung x 1
- Screw Clips Pack x 1
- Tail Plug x 1
- Benutzerhandbuch x 1
Image: Diagram of included components for APPECK Permanent Outdoor Lights C5109-C.
Setup und Installation
- Installation planen: Determine the desired placement for your lights. It is recommended to install the string lights 2-4 inches away from the wall surface for optimal wall washing effects.
- Saubere Oberfläche: Clean the installation surface thoroughly with a cloth to ensure proper adhesion.
- Attach Lights (Temporary): Peel off the backing film from the adhesive tape on the back of each light. Firmly press each light against the surface for more than 8 seconds. This adhesive is for short-term use.
- Secure Lights (Permanent): For long-term stability, use the provided screw clips. Install screws and clips to each light segment to secure them firmly.
- Lichterketten verbinden: Connect the 16.4ft light string segments using the waterproof connectors. Ensure they are securely fastened. The total length should not exceed 100ft (6 segments).
- Connect Control Box and Power Adapter: Connect the control box to the light string and then connect the power adapter to the control box.
- Seal Tail Plug: Firmly screw on the waterproof connector cap of the last light segment to ensure water resistance.
Image: Installation steps for APPECK Permanent Outdoor Lights C5109-C.
App Setup (Smart Life App)
- Schalten Sie WLAN und Bluetooth auf Ihrem Smartphone ein.
- Download the "Smart Life" App from Google Play Store or Apple App Store, or scan the QR code provided in the product packaging.
- Melden Sie sich mit einem bestehenden Konto an oder erstellen Sie ein neues Konto.
- Start pairing mode: Ensure the lights are powered on, then press and hold the on/off button on the control box for 3-5 seconds until the lights blink red.
- In the Smart Life App, tap the "+" icon in the top right corner and search for "C5109".
- Ensure you select a 2.4GHz Wi-Fi network. 5GHz Wi-Fi will not work.
- Complete the pairing steps as guided by the app. The device will be added successfully.
Image: Smart Life App pairing process for APPECK Permanent Outdoor Lights C5109-C.
Bedienungsanleitung
Your APPECK Permanent Outdoor Lights offer multiple control options for personalized lighting experiences.
Smart Life App-Steuerung
- Szenenanpassung: Choose from 111 built-in scene modes. The app supports programming, saving, collecting, looping, timing, and length settings for scenes.
- Individuelle Lichtsteuerung: Adjust the color of each light bead individually from 16 million available colors.
- Helligkeitsanpassung: Control the brightness of both RGB and warm white lights.
- Terminplanung: Legen Sie Zeitpläne für automatische Ein-/Ausschaltzeiten fest.
Image: Smart Life App interface for scene customization and individual light control.
Fernbedienung
Use the included remote controller for convenient operation. The remote allows you to change colors, adjust brightness, and select preset modes without using the app.
- Ensure 2 AAA batteries are installed (not included).
- Point the remote towards the control box for best response.
Sprachsteuerung
The lights are compatible with Amazon Alexa and Google Assistant. Once connected via the Smart Life App, you can use voice commands to control your lights.
- Link your Smart Life account to your Amazon Alexa or Google Assistant app.
- Use commands such as "Alexa, turn on the outdoor lights" or "Hey Google, change outdoor lights to red."
Bild: Überview of control options for APPECK Permanent Outdoor Lights C5109-C.
Wartung
The APPECK Permanent Outdoor Lights are designed for durability and reliability in various outdoor conditions.
- Reinigung: Periodically wipe the lights and control box with a soft, damp cloth to remove dirt and debris. Ensure the power is off before cleaning.
- Wasserbeständigkeit: The string lights and control box have an IP65 waterproof rating, making them resistant to rain and splashes. Ensure all connections are securely tightened to maintain water resistance.
- Temperaturbeständigkeit: The lights are designed to withstand temperatures from -20~60℃ (-4~140℉).
- Langlebigkeit: With a lifespan of up to 50,000 hours, these lights require minimal maintenance.
Image: Durability features of APPECK Permanent Outdoor Lights C5109-C.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nicht an. | Kein Strom, Wackelkontakt, defektes Netzteil. | Check power outlet. Ensure all connections (power adapter, control box, light strings) are secure. Test with another power source if possible. |
| Lights are not responding to app/remote. | Not paired, remote batteries low, Wi-Fi issue. | Ensure lights are paired correctly (refer to App Setup). Replace remote batteries. Verify your Wi-Fi is 2.4GHz and stable. Re-pair if necessary. |
| Cannot connect to 5GHz Wi-Fi. | Product only supports 2.4GHz Wi-Fi. | Connect your smartphone and the lights to a 2.4GHz Wi-Fi network. 5GHz networks are not compatible. |
| Lights are not displaying desired colors/scenes. | Incorrect app settings, remote mode. | Check scene selections in the Smart Life App. Ensure the remote is not overriding app settings. |
| Lights are not waterproof. | Loose connections, damaged casing. | Ensure all waterproof connectors are tightly screwed. Inspect for any visible damage to the light string or control box. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | C5109-C |
| Marke | Appeck |
| Lichtart | RGBW LED String Lights (4-in-1 LED Bead) |
| Gesamtlänge | 100ft (6 x 16.4ft segments) |
| Anzahl der LEDs | 72 |
| Abstrahlwinkel | 105° |
| Wandwaschtiefe | Bis zu 16 Zoll |
| Warmweiße Farbtemperatur | 2700 |
| Helligkeit des weißen Lichts | Up to 40lm per light |
| RGB-Helligkeit | Up to 25lm per light |
| Wasserbeständigkeit | IP65 (String Lights & Control Box) |
| Temperaturbeständigkeit | -20 … 60 °C (-4 … 140 °F) |
| Lebensdauer | Bis zu 50,000 Stunden |
| Kontrollmethoden | Smart Life App, Remote Control, Control Box, Voice Control (Alexa/Google Assistant) |
| Wi-Fi-Kompatibilität | Nur 2.4 GHz |
| Stromquelle | Kabelgebundene Elektrik |
| Bandtage | 24 Volt (DC) |
| Wastage | 54 Watt |
Garantie und Support
APPECK provides customer support for its products. If you encounter any issues or require further assistance, please contact our support team.
- Kundendienst: We are available 7 days a week, 24 hours a day to assist you. Please refer to the contact information provided in your product packaging or on the official APPECK webWebsite.
- Garantie: Information regarding product warranty can be found on the official APPECK webWebsite oder durch Kontaktaufnahme mit dem Kundendienst.
