1. Einleitung
The GHome Smart KD30 is an advanced smart deadbolt lock designed to enhance home security and convenience. It offers multiple unlocking methods, including fingerprint recognition, passcode entry, physical key, and smartphone app control. This manual provides detailed instructions for the proper installation, operation, and maintenance of your KD30 smart lock.
2. Sicherheitshinweise
Please read and understand all instructions before installing and using the GHome Smart KD30 lock. Failure to follow these instructions may result in product malfunction, property damage, or personal injury.
- Do not disassemble or modify the lock.
- Keep the lock away from water and direct sunlight.
- Achten Sie beim Einbau auf die korrekte Batteriepolarität.
- Always keep a physical backup key in a safe, accessible location outside your home.
- Avoid using corrosive cleaners on the lock's surface.
3. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind.
- Exterior Assembly (Keypad with Fingerprint Reader)
- Interior Assembly (Battery Cover, Thumb Turn)
- Riegelverriegelung
- Montageplatte
- Schlagplatte
- Physische Schlüssel (2)
- Montageschrauben und Befestigungsmaterial
- Installationsvorlage
- Bedienungsanleitung
Bild: Überview of the GHome Smart KD30 lock, showing the exterior keypad with fingerprint reader, the interior unit, and a smartphone displaying the companion app interface.
4. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Marke | GHome Smart |
| Modellname | KD30 |
| Sperrtyp | Riegel |
| Zugriffsmethoden | Fingerprint, Passcode, Physical Key, App Control |
| Fingerabdruckkapazität | Bis zu 50 Gruppen |
| Passcode-Kapazität | Up to 50 passwords |
| Geschwindigkeit freischalten | 0.3 seconds (fingerprint) |
| Material | Zink |
| Farbe | Silber |
| Abmessungen (L x B x H) | 9.13 x 7.13 x 3.62 Zoll |
| Artikelgewicht | 2.35 Pfund |
| Konnektivität | Bluetooth, Zigbee (G2 gateway required for remote access) |
| Stromversorgung | 4 x AA-Alkalibatterien (nicht im Lieferumfang enthalten) |
| Notstromversorgung | USB-C-Anschluss |
| Betriebstemperatur | -4°F bis 140°F (-20°C bis 60°C) |
| IP-Schutzart | IP54 |
5. Installation
The GHome Smart KD30 lock is designed for easy DIY installation. A screwdriver is the only tool required. Refer to the included installation template for precise drilling if your door is not pre-drilled.
5.1 Türvorbereitung
Stellen Sie sicher, dass Ihre Tür die folgenden Spezifikationen erfüllt:
- Door thickness: 1 3/8" to 2 1/8" (35mm-55mm)
- Door hole diameter: 2 1/8" (55mm)
- Backset: 2 3/8" or 2 3/4" (60mm or 70mm)
- Latch hole diameter: 1" (25mm)
Image: Diagram illustrating required door dimensions and measurements for proper installation of the KD30 smart lock.
5.2 Schrittweise Installation
- Installieren Sie den Riegelriegel: Insert the deadbolt latch into the door edge. Ensure it is oriented correctly for your door's backset.
- Außenbaugruppe installieren: Place the exterior keypad assembly onto the door, ensuring the spindle and control wire pass through the door holes.
- Montageplatte installieren: Secure the mounting plate to the interior side of the door using the provided screws, passing the control wire through the plate.
- Connect Control Wire: Carefully connect the control wire from the exterior assembly to the interior assembly.
- Innenbaugruppe installieren: Attach the interior assembly to the mounting plate, ensuring the thumb turn engages with the deadbolt mechanism. Secure with screws.
- Batterien installieren: Open the battery cover on the interior assembly and insert 4 AA alkaline batteries (not included), observing correct polarity.
- Testbetrieb: With the door open, test the lock and unlock functions using the thumb turn and keypad.
For a visual guide on the unlocking options, please refer to the video below:
Video: This video demonstrates the various unlocking methods available for the GHome Smart KD30 lock, including fingerprint, passcode, and app control.
6. Bedienungsanleitung
6.1 Entsperrmethoden
- Entsperren per Fingerabdruck: Place your registered finger on the fingerprint sensor. The lock will unlock in approximately 0.3 seconds. The system supports up to 50 unique fingerprints.
- Passworteingabe: Enter your programmed passcode on the keypad, then press the unlock button. The lock supports up to 50 passcodes.
- Physischer Schlüssel: Verwenden Sie den mitgelieferten physischen Schlüssel als herkömmliche Sicherungsmethode.
- App-Steuerung: Use the GHome Smart app on your smartphone to unlock the door via Bluetooth. Remote unlocking requires a G2 gateway (sold separately).
Image: Visual representation of the four primary unlocking methods for the KD30 smart lock: fingerprint, PIN password, mechanical key, and smartphone app control.
6.2 Fingerabdruckverwaltung
The KD30 lock features AI-powered fingerprint recognition with 98.99% accuracy and 100% local data storage for enhanced privacy. It can store up to 50 fingerprints.
Image: Details on the fingerprint unlock feature, emphasizing support for 50 fingerprints, 0.3-second rapid identification, and a 99.99% accuracy rate.
6.3 Automatische Verriegelungsfunktion
The auto-lock function automatically secures the door after a set period (10 to 30 minutes) once it has been closed. This ensures your door is always locked, providing peace of mind.
Image: The KD30 lock's auto-lock feature, which can be set to engage between 10 seconds and 30 minutes after closing, alongside a one-touch locking option.
6.4 Temporary & Dynamic Passcodes
Generate temporary or dynamic passcodes through the GHome Smart app for visitors, cleaners, or short-term guests. These codes can be set with specific validity periods or for one-time use, enhancing security without sharing permanent access.
6.5 App-Steuerung (Bluetooth)
Connect your KD30 lock to the GHome Smart app via Bluetooth (up to 15 meters). The app allows you to:
- Unlock/Lock the door.
- Monitor lock status.
- Überprüfen Sie den Batteriestand.
- View entry logs.
- Receive alerts for forced entry attempts or incorrect passcodes.
For remote control functionality beyond Bluetooth range, a G2 gateway (sold separately) is required.
Image: A user interacting with the GHome Smart app on a smartphone to control the KD30 smart lock, demonstrating the convenience of keyless entry.
7. Wartung
7.1 Batteriewechsel
The KD30 lock requires 4 AA alkaline batteries. When the battery level is low (below 4.8V), the lock will provide a voice prompt. Replace batteries promptly to ensure continuous operation.
Image: Battery specifications for the KD30 lock, indicating an approximate 6-month battery life, the need for 4 AA batteries, and the inclusion of a USB-C port for emergency power.
7.2 Notstromversorgung
In case of complete battery depletion, the lock features a USB-C port on the exterior assembly. Connect a portable power bank to temporarily power the lock and gain entry using a registered fingerprint or passcode.
7.3 Reinigung
Clean the lock's surface with a dry, soft cloth. Avoid using abrasive or corrosive cleaning agents, as they may damage the finish or electronic components.
8. Fehlerbehebung
If you encounter any issues with your GHome Smart KD30 lock, please refer to the troubleshooting section in the full user manual or contact customer support.
- Schloss reagiert nicht: Check battery levels and replace if necessary. Ensure the control wire connection is secure.
- Fingerabdruck nicht erkannt: Stellen Sie sicher, dass Ihr Finger sauber und trocken ist. Registrieren Sie Ihren Fingerabdruck erneut, falls die Probleme weiterhin bestehen.
- Probleme mit der App-Verbindung: Ensure Bluetooth is enabled on your phone and you are within range. Restart the app or the lock if needed.
9. Garantie und Support
GHome Smart provides a 1-year product warranty and a 30-day satisfaction assurance for worry-free purchases. For any questions or support, please contact GHome Smart customer service.
- Kundendienst: Available PST 9am-5pm (Monday-Friday) with 24/7 online support.
- Kontaktinformationen: Refer to the product packaging or official GHome Smart webDie aktuellsten Kontaktdaten finden Sie auf der Website.
