Sharkoon AK6 RGB ATX PC Case User Manual

1. Einleitung

Thank you for choosing the Sharkoon AK6 RGB ATX PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this guide thoroughly before beginning the assembly process to ensure optimal performance and longevity of your components.

2. Sicherheitshinweise

• Vor dem Einbau oder Ausbau von Komponenten im PC-Gehäuse muss immer die Stromversorgung von der Steckdose getrennt werden.
• Behandeln Sie gehärtete Glasscheiben mit Vorsicht. Sie sind zerbrechlich und können bei Stürzen oder Stößen brechen.
• Avoid exposing the case to extreme temperatures, humidity, or direct sunlight.
• Keep small parts and screws out of reach of children.
• Sorgen Sie für eine ordnungsgemäße Erdung, um Schäden an empfindlichen elektronischen Bauteilen durch elektrostatische Entladung (ESD) zu verhindern.

3. Packungsinhalt

Bitte überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• Sharkoon AK6 RGB ATX PC-Gehäuse
• Zubehörbox (mit Schrauben, Kabelbindern und anderen Kleinteilen)
• Benutzerhandbuch (dieses Dokument)

4. Produktüberschreitungview

The Sharkoon AK6 RGB ATX PC Case is designed with a modern glass aesthetic, featuring seamless integration of tempered glass on the front and side panels. It includes four pre-installed 120mm addressable RGB PWM fans for optimal airflow and visual appeal. The case supports a wide range of components, including BTF motherboards, and offers ample space for high-performance hardware.

Figure 4.1: Front interior view of the Sharkoon AK6 RGB PC case, showcasing the pre-installed addressable RGB fans and the spacious main chamber.

Abbildung 4.2: Schräg view of the Sharkoon AK6 RGB PC case, highlighting the tempered glass side panel and the top mesh for ventilation.

Abbildung 4.3: Rückseite view of the Sharkoon AK6 RGB PC case, showing the I/O shield cutout, rear exhaust fan mount, and expansion slots.

Vorderes E/A-Panel

The front I/O panel is located on the side of the case and includes:

• Netzschalter
• Reset-Taste
• 2 x USB Ports (Type-A)
• 1 x USB-Typ-C-Anschluss
• Audio Jacks (TRRS)

5. Einrichtung und Installation

Follow these steps to install your components into the Sharkoon AK6 RGB PC Case.

5.1 Vorbereitung des Falls

1. Stellen Sie das Gehäuse auf eine ebene, stabile Oberfläche.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear and gently pulling the panel away.
3. Remove the rear metal side panel by unscrewing the thumb screws.

5.2 Motherboard-Installation

The AK6 RGB supports Mini-ITX, Micro-ATX, ATX, and BTF motherboards.

1. Install the I/O shield into the cutout at the rear of the case (if not pre-installed on your motherboard).
2. Richten Sie das Motherboard an den Abstandshaltern im Gehäuse aus. Stellen Sie sicher, dass alle Abstandshalter mit den Befestigungslöchern des Motherboards übereinstimmen.
3. Befestigen Sie das Motherboard mit den passenden Schrauben aus dem Zubehörkasten.

Abbildung 5.1: Innenraum view of the Sharkoon AK6 RGB PC case, illustrating the motherboard tray, cable management cutouts, and front fan mounting points.

5.3 Installation der Stromversorgung

The case features a bottom-mount power supply design.

1. Slide the power supply unit (PSU) into the dedicated compartment at the bottom rear of the case.
2. Align the PSU with the screw holes at the rear of the case.
3. Befestigen Sie das Netzteil mit den mitgelieferten Schrauben.

5.4 Installation des Speichergeräts

The AK6 RGB supports up to two 3.5" HDDs or four 2.5" SSDs.

1. Für 3.5"-Festplatten: Locate the drive cages beneath the PSU shroud. Slide the HDD into a drive tray and secure it with screws.
2. Für 2.5"-SSDs: SSDs can be mounted on the dedicated brackets behind the motherboard tray or on the 3.5" drive trays using adapter screws.

Abbildung 5.2: Innenraum hinten view of the Sharkoon AK6 RGB PC case, detailing the drive cages for 3.5-inch HDDs and 2.5-inch SSDs, and the power supply shroud area.

5.5 Installation der Grafikkarte und der Erweiterungskarte

1. Entfernen Sie die erforderlichen Erweiterungssteckplatzabdeckungen an der Rückseite des Gehäuses.
2. Stecken Sie Ihre Grafikkarte oder andere Erweiterungskarten in die entsprechenden PCIe-Steckplätze auf Ihrem Motherboard.
3. Secure the cards with screws. The case includes a rubberized graphics card support for larger cards.

5.6 Installation von CPU-Kühler und Radiator

The case supports CPU coolers up to 17 cm in height and allows for extensive liquid cooling setups.

• Installieren Sie Ihren CPU-Kühler gemäß den Anweisungen des Herstellers.
• For liquid cooling, the case can accommodate a 360mm radiator at the top and an additional 280mm radiator.

5.7 Kabelmanagement

Nutzen Sie die Kabeldurchführungen und Befestigungspunkte hinter dem Mainboard-Tray, um Kabel zu verlegen und zu sichern. Dies verbessert die Luftzirkulation und die Optik.

6. Bedienungsanleitung

6.1 Einschalten

After all components are installed and cables are connected, replace the side panels. Connect the power cable to your PSU and a wall outlet, then press the power button on the front I/O panel to start your system.

6.2 RGB-Lüftersteuerung

The AK6 RGB comes with four pre-installed addressable RGB PWM fans. These fans are connected to an RGB controller which also provides connections for up to four LED elements and four PWM fans. The RGB lighting can typically be controlled via your motherboard's RGB software (if compatible) or through a dedicated button on the case (if present and connected).

6.3 Optimierung des Luftstroms

The case is designed for ideal airflow, with three inverted fans drawing air from the side into the case. The top and rear fan mounts allow for additional exhaust fans. Ensure proper fan orientation for optimal cooling performance.

Abbildung 6.1: Bspample of a fully assembled system within the Sharkoon AK6 RGB PC case, featuring various components and active RGB lighting.

7. Wartung

Regular maintenance helps ensure the longevity and performance of your PC components.

• Staubfilter: Periodically clean the removable dust filters (e.g., on the top and bottom) to maintain optimal airflow and prevent dust buildup inside the case. Use compressed air or a soft brush.
• Glasplatten: Clean tempered glass panels with a soft, lint-free cloth and a glass cleaner. Avoid abrasive materials that could scratch the surface.
• Innenreinigung: Use compressed air to remove dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.

8. Fehlerbehebung

If you encounter issues with your PC case, refer to the following common troubleshooting steps:

• Kein Strom: Ensure the power supply is properly connected to the wall outlet and the motherboard. Check all internal power cables (24-pin ATX, 8-pin CPU, PCIe power).
• Lüfter drehen sich nicht/RGB funktioniert nicht: Verify that all fan and RGB cables are correctly connected to the motherboard or the included RGB controller. Check your motherboard's BIOS/UEFI settings or RGB software for fan speed and lighting control.
• Front-I/O-Anschlüsse funktionieren nicht: Confirm that the front panel connectors (USB, audio, power/reset switches) are correctly plugged into the corresponding headers on your motherboard.
• Überhitzung: Ensure all fans are spinning correctly and oriented for proper airflow. Clean dust filters and internal components. Verify CPU cooler installation.

For further assistance, please contact Sharkoon support.

9. Spezifikationen

10. Gewährleistung

Sharkoon products are manufactured to high quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon webDie Garantie deckt in der Regel Material- und Verarbeitungsfehler bei normalem Gebrauch ab.

11. Unterstützung

If you require technical assistance or have questions regarding your Sharkoon AK6 RGB ATX PC Case, please visit the official Sharkoon website for support resources, FAQs, and contact information. You may also find updated drivers or software for the RGB controller there.

WebWebsite: www.sharkoon.com