Einführung
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ASD 2x2 LED Flat Panel Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use only in commercial or industrial settings such as offices, schools, hospitals, retail spaces, and residential areas.
Sicherheitshinweise
- WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Die Installation sollte von einem qualifizierten Elektriker durchgeführt werden.
- Sicherstellung der Versorgungsvoltage is compatible with the luminaire (120-277V).
- Do not handle live wires.
- Dieses Produkt ist geeignet für damp Standorte.
- Verändern Sie das Gerät nicht.
Produkteigenschaften
- Modernes Design: LED back-lit flat panel with anti-glare PC lens and durable commercial-grade aluminum housing.
- Microwave Motion Sensor: Built-in sensor automatically turns off the fixture when no motion is detected. Settings are adjustable via remote control (sold separately, ASIN B0D2KRKZHN).
- Color and Power Selectable: Choose between 3500K Neutral White, 4000K Cool White, or 5000K Daylight color temperatures and adjust power (20W/25W/30W) with a simple switch.
- Dimmable Driver: 0-10V dimmable driver with circuit overload, short circuit, and low-voltage Schutz.
- Lange Lebensdauer: Calculated lifespan up to 180,000 hours.
- Zertifizierungen: UL and DLC Premium certified.
Setup und Installation
The ASD 2x2 LED Flat Panel Light offers multiple mounting options: recessed, suspended, and surface mount. This section details the recessed installation process. For suspended or surface mount installations, additional hardware (sold separately) is required.
Schritte zur versenkten Installation:
- Bereiten Sie das Panel vor: Lift all mounting clips along the edges of the panel. Turn the mounting clip head outwards.
- Elektrischer Anschluss: Connect the wires into the junction box of the panel. Match the neutral (N), live (L), and ground (G) wires using appropriate wire nuts. Ensure power is disconnected before making any electrical connections.
- Sichern Sie das Panel: Adjust the panel into place within the ceiling grid. Ensure the clips are securely fastened to the ceiling's T-BAR/T-GRID.
Image: Step 1 shows how to adjust the mounting clips on the LED panel.
Image: Step 2 illustrates connecting the electrical wires to the panel's junction box.
Image: Step 3 shows the final placement and securing of the LED panel in the ceiling grid.
Andere Montageoptionen:
The panel supports surface mount (with ASD-FDW-ELP24 frame) and suspended mount (with ASD-CHS4 kit). These accessories are not included and must be purchased separately.
Image: This diagram illustrates the three available mounting methods: recessed, surface, and suspended.
Bedienungsanleitung
Farbtemperatur und Wattage Auswahl:
The LED panel features selectable color temperature (CCT) and wattage settings. These can be adjusted using switches located on the fixture before installation or by using the remote control (sold separately).
- Farbtemperaturen: 3500K (Neutral White), 4000K (Cool White), 5000K (Daylight).
- Wastage Optionen: 20W, 25W, 30W.
Image: This image displays the switches for selecting desired color temperature and wattage.
Microwave Motion Sensor Operation:
The integrated microwave motion sensor detects movement and controls the light output. The sensor settings can be customized using the ASD-06RC remote control (ASIN B0D2KRKZHN), which is sold separately.
Image: This diagram shows the motion sensor's detection range and configurable parameters like hold time, stand-by period, and stand-by dimming.
Remote Control Functions (ASD-06RC, sold separately):
| Taste | Funktion | Hinweise |
|---|---|---|
| EIN/AUS | Schalten Sie den Sensor ein/aus. | |
| Auto | Enter "sensor mode" and perform previous settings. | |
| Zurücksetzen | Enter "sensor mode" and perform the default settings. | |
| Szenen | Zeigt die aktuellen, in der Fernbedienung gespeicherten Einstellungen an. | |
| Start | Drücken Sie diese Taste, um mit der Einrichtung der Szene zu beginnen. | |
| Erinnerung | Speichert die Szeneneinstellungen. | |
| Anwenden | Wendet die aktuellen Szeneneinstellungen auf die Vorrichtung an. | |
| Montagehöhe | Adjust detection area/sensitivity levels according to real installation situations, higher or lower. | |
| Schicken | Memorizes and sends out the previous setting of individual parameters. | |
| Erfassungsbereich | Also known as "Sensitivity". 100% means the highest sensitivity and longest distance. Use this button and the +/- buttons to adjust. | |
| Tageslichtsensor | The preset lux level at which motion will be detected. Use this button and the +/- buttons to adjust. | |
| Standby-Dimmung | After hold time, the light will dim from 100% to optional stand-by dimming levels. Use this button and the +/- buttons to adjust. | |
| Haltezeit | The period that light will stay illuminated 100% after no motion is detected. Use this button and the +/- buttons to adjust. | |
| Standby-Zeit | The period after hold time, during which the light keeps stand-by dimming level. Use this button and the +/- buttons to adjust. | |
| +/- | Die wichtigsten Funktionstasten dienen zum Anpassen der Faktoren auf das gewünschte Niveau. | |
| Runter | Press "-" button to dim light directly to non-detection mode. | |
| CCT wählbar | Gilt nicht für dieses Produkt. | |
| Leistung | Adjust brightness in ON/OFF mode & sensor mode, minimum 10%, max 100%, each time this button is pressed it is changed by 3%. | |
| Reservierte Schaltfläche | Gilt nicht für dieses Produkt. | |
| Tageslichtnutzung | Tageslichtnutzungsfunktion aktiviert oder deaktiviert. | |
| Test-Taste | Press this button to test the sensor, it will temporarily change the hold time to 2s. This setting cannot be saved. |
Image: The ASD-06RC remote control, used for adjusting the motion sensor settings.
Wartung
The ASD 2x2 LED Flat Panel Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Reinigung: Vor der Reinigung die Stromzufuhr unterbrechen. Verwenden Sie ein weiches, trockenes oder leicht angefeuchtetes Tuch.amp Verwenden Sie ein Tuch, um die Oberfläche des Panels abzuwischen. Verwenden Sie keine Scheuermittel, Lösungsmittel oder aggressive Chemikalien, da diese die Oberfläche oder die optischen Komponenten beschädigen können.
- Inspektion: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and contact a qualified electrician for repair.
- Lampenwechsel: The LED light source is integrated and not user-replaceable. The fixture has a long lifespan, reducing the need for frequent replacements.
Fehlerbehebung
If you encounter issues with your LED Flat Panel Light, refer to the following common troubleshooting steps:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Keine Stromversorgung; lose Verkabelung; defekte Leuchte. | Check circuit breaker/fuse. Ensure all wiring connections are secure. If problem persists, contact support. |
| Das Licht flackert oder wird unerwartet dunkler. | Incompatible dimmer switch; unstable power supply; loose wiring. | Ensure a 0-10V dimming system is used. Verify stable power. Check wiring connections. |
| Motion sensor not detecting movement or activating incorrectly. | Incorrect sensor settings; obstruction; sensor malfunction. | Adjust sensor settings using the remote control (hold time, detection range). Ensure no obstructions block the sensor. Reset sensor to default settings. |
| Color temperature or wattage not changing. | Switches not set correctly; remote control issue. | Verify physical switches on the fixture are set to desired CCT/wattage. If using remote, ensure it's paired and functioning. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | A-BLP-22A30-MS |
| Abmessungen (L x B x H) | 23.74" x 23.74" x 1.37" (603 mm x 603 mm x 35 mm) |
| Wastage | Selectable: 20W / 25W / 30W |
| Helligkeit | Bis zu 3633 Lumen (bei 30 W) |
| Farbtemperatur (CCT) | Selectable: 3500K (Neutral White) / 4000K (Cool White) / 5000K (Daylight) |
| Bandtage | 120 bis 277 V |
| Dimmbar | Yes, 0-10V Dimming |
| Bewegungssensor | Built-in Microwave Motion Sensor |
| Kontrollmethode | Remote (ASD-06RC, sold separately) |
| Material | Aluminum, Iron, Polycarbonate |
| CRI | >80 |
| Lebensdauer | 180,000 hours (calculated) |
| Zertifizierungen | UL, DLC Premium |
| Installationstyp | Recessed, Surface Mount (kit sold separately), Suspended (kit sold separately) |
| Verwendung im Innen- und Außenbereich | Nur für den Innenbereich geeignet. |
Garantie
ASD bietet eine 5 Jahr eingeschränkte Garantie for this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official ASD webWebsite oder wenden Sie sich an den Kundendienst.
Unterstützung
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact ASD customer support.
- Online-Ressourcen: Visit the official ASD webWeitere Produktinformationen, FAQs und Supportdokumente finden Sie auf dieser Website.
- Kontaktinformationen: Refer to the product packaging or the ASD webHier finden Sie die aktuellsten Kontaktdaten unseres Kundenservice.
Weitere Ressourcen
For a quick and hassle-free installation, you can also refer to the step-by-step manual available on our website or through the product's Amazon listing.
Offizielles Benutzerhandbuch (PDF): PDF herunterladen
