Sena U1 E-Bike Smart Helm Bedienungsanleitung

1. Einleitung

The Sena U1 E-Bike Smart Helmet is designed to enhance your cycling experience by integrating advanced communication, safety, and comfort features. This manual provides essential information for the proper use, maintenance, and troubleshooting of your U1 helmet.

Key features include Mesh 2.0 Intercom for reliable rider-to-rider communication, a rear LED for improved visibility, Advanced Noise Control for clear audio, and IPX4 water resistance. The helmet is also designed for comfort with an adjustable fit and ventilation.

2. Produktüberschreitungview

2.1 Hauptmerkmale

• Enhanced Mesh 2.0 Intercom: For reliable rider-to-rider communication.
• Hintere LED: For better visibility at night.
• Fortschrittliche Geräuschunterdrückung: For clear audio in noisy or windy environments.
• IPX4 Wasserbeständigkeit: Schutz gegen Spritzwasser aus allen Richtungen.
• Convenient Over-the-Air Firmware Updates: Ensures your helmet is always up-to-date.
• NTA (E-Bike helmet certification): Meets safety standards for e-bikes.

2.2 Was ist in der Box?

• U1 Helmet
• Visor (Yellow & Gray)
• Front & Side Pad
• Mittelpolster
• Hinteres Polster
• USB-C-Kabel

2.3 Produktkomponenten

Abbildung 1: Sena U1 E-Bike Smart Helmet (Matte Gray)

Abbildung 2: Built-in Speakers & Microphone with Advanced Noise Control

Abbildung 3: Integrated Rear LED for enhanced visibility

Abbildung 4: Mesh Intercom allows communication with other riders

2.4 Unboxing the Sena U1 Smart Helmet

3. Einrichtung

3.1 Helmet Fitting

Proper helmet fit is crucial for safety and comfort. Follow these steps to ensure your Sena U1 helmet fits correctly:

1. Messen Sie Ihren Kopfumfang: Use a flexible tape measure to find the circumference of your head, roughly 1 inch above your eyebrows and the top of your ears. Compare this measurement to the sizing guide below to select the appropriate helmet size.
2. Adjust the Dial: Before placing the helmet on your head, open the dial adjustment at the back to its widest setting.
3. Positionieren Sie den Helm: Place the helmet on your head, ensuring it sits level and covers your forehead without tilting too far forward or backward.
4. Tighten the Dial: Gradually tighten the dial adjustment at the back until the helmet feels snug but comfortable. It should not be too tight or cause pressure points.
5. Buckle the Chin Strap: Fasten the chin strap. It should be loose enough to allow you to move your mouth, but tight enough that you can only fit two to three fingers between your chin and the strap.
6. Adjust Side Straps: Adjust the buckles on the side straps so they form a 'V' shape just below your ears and lie flat against your head.

Größentabelle

Helmet Sizing Guide Video

3.2 Aufladen des Helms

The Sena U1 helmet features a USB-C charging port. Connect the provided USB-C cable to the helmet and a power source to charge. A full charge from a dead battery takes approximately 2.5 hours, providing up to 12 hours of talk time.

3.3 Sena Cycling App

Download the Sena Cycling App to manage your helmet settings, customize features, and perform over-the-air firmware updates. This ensures your helmet always has the latest functionalities and enhancements.

Abbildung 5: Verwalten Sie die Einstellungen von Ihrem Smartphone aus mit der Sena Cycling App.

4. Bedienungsanleitung

4.1 Ein-/Ausschalten

• So schalten Sie das Gerät ein: Press the center button and the '+' (volume up) button simultaneously for one second.
• So schalten Sie das Gerät aus: Press the center button and the '+' (volume up) button simultaneously for one second.

4.2 Mesh Intercom

The U1 helmet features Mesh 2.0 Intercom technology, allowing for hands-free, real-time communication with other Sena helmet users. This system offers high audio quality across multiple open mesh channels.

• Activate/Deactivate Mesh Intercom: Single tap the center button to turn Mesh Intercom on or off.
• Change Mesh Network Channel: Double tap the center button to enter channel selection mode and change your Mesh network.
• Mikrofon stummschalten/Stummschaltung aufheben: Press the center button for one second to mute or unmute your microphone during a conversation.

Abbildung 6: Enhanced adventure with helmet-to-helmet communication

Abbildung 7: Hands-free operation for safer riding

4.3 Rear LED Lights

The integrated rear LED lights improve your visibility to others, especially in low-light conditions. You can control the lights directly from the helmet or through the Sena Cycling App.

• Ein-/Ausschalten: Single press the light button on the helmet to toggle the lights on or off.
• Customize Functions: Use the Sena Cycling App to customize the tail light functions (e.g., solid, flash modes).

4.4 Phone Connectivity

The Sena U1 helmet connects to your smartphone via Bluetooth, allowing you to:

• Hear GPS navigation.
• Take hands-free phone calls.
• Stream music.

5. Wartung

• Reinigung: The helmet's inner pads are removable and washable for hygiene.
• Lagerung: Store the helmet in a cool, dry place away from direct sunlight when not in use.
• Firmware-Updates: Regularly check for and install firmware updates via the Sena Cycling App to ensure optimal performance and access to new features.

6. Fehlerbehebung

If you encounter any issues with your Sena U1 helmet, please refer to the following common solutions:

• Kein Strom: Ensure the helmet is fully charged. Connect it to a power source using the USB-C cable.
• Probleme mit der Gegensprechanlage: Verify that Mesh Intercom is activated. Ensure all riders are within range and on the same Mesh network channel.
• Schlechte Audioqualität: Check that the microphone is not muted. Ensure Advanced Noise Control is active.
• Verbindungsprobleme: If experiencing issues with Bluetooth pairing, try restarting both the helmet and your smartphone. Ensure the Sena Cycling App is up-to-date.
• Helmpassform: Re-adjust the dial and straps as per the fitting instructions to ensure a snug and comfortable fit without excessive pressure.

For further assistance, please contact Sena customer support.

7. Spezifikationen

• Marke: Sena
• Modellname: U1
• Farbe: Mattgrau
• Größe: Medium
• Altersspanne: Erwachsene
• Besonderheit: Bluetooth
• Außenmaterial: Acrylnitril-Butadien-Styrol (ABS)
• Innenmaterial: Expandiertes Polystyrol
• Artikelgewicht: 560 Gramm
• UPC: 885465021513
• Zertifizierungen: NTA (E-Bike helmet certification)

8. Garantie und Support

The Sena U1 E-Bike Smart Helmet comes with a 2 Jahr Garantie Diese Garantie gilt ab Kaufdatum und deckt Herstellungsfehler ab. Sie gewährleistet, dass das Produkt den Qualitätsstandards entspricht.

For warranty claims, technical support, or any questions regarding your Sena U1 helmet, please visit the official Sena webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg für alle Garantieanfragen auf.