ANTEC CX700 ATX Mid-Tower-Gaming-Gehäuse – Benutzerhandbuch

Einführung

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your ANTEC CX700 ATX Mid Tower Gaming Case. Please read this manual carefully before beginning installation to ensure proper assembly and optimal performance.

Figure 1: ANTEC CX700 ATX Mid Tower Gaming Case. This image displays the overall design of the case, highlighting its panoramic glass panels and the vibrant ARGB fans visible through the transparent surfaces.

Packungsinhalt

Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:

• ANTEC CX700 ATX Mid Tower Gaming Case
• Zubehörbox (Schrauben, Kabelbinder, Abstandshalter)
• Benutzerhandbuch (dieses Dokument)
• Pre-installed ARGB Fans (3 x 120mm reverse fans on PSU shroud, 2 x 120mm reverse fans on right side, 1 x 120mm fan in rear)

Setup und Installation

Follow these steps for proper installation of your PC components into the CX700 case.

1. Vorbereitung des Falls

1. Seitenteile entfernen: The CX700 features tool-free panel design. Gently pull the tempered glass side panel (left) and the steel side panel (right) to detach them.
2. Zubehörbox: Suchen Sie im Inneren des Gehäuses die Zubehörbox, die alle notwendigen Schrauben und Befestigungsmaterialien enthält.

Abbildung 2: Innenraum view of the ANTEC CX700 case. This image illustrates the spacious interior, fan mounting locations, and the layout for component installation.

2. Motherboard-Installation

1. Abstandshalter installieren: Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, ITX).
2. Motherboard montieren: Carefully place your motherboard onto the standoffs and secure it with the provided screws.

3. Installation des Netzteils (PSU)

1. Position PSU: Schieben Sie das Netzteil in das dafür vorgesehene Fach an der unteren Rückseite des Gehäuses.
2. Sicheres Netzteil: Fasten the PSU with screws from the rear of the case. The PSU mount includes EVA anti-vibration foams.

4. Installation des Speicherlaufwerks

The CX700 supports 2 x 3.5"/2.5" drive mounts and 2 x 2.5" drive mounts.

1. 3.5"/2.5" Drives: Utilize the drive cages located near the PSU shroud.
2. 2.5" Drives: Mount SSDs on the dedicated 2.5" brackets behind the motherboard tray.

5. Installation der Grafikkarte (GPU)

1. PCI-Steckplatzabdeckungen entfernen: Remove the necessary reusable PCI slot covers from the rear of the case.
2. GPU einsetzen: Carefully insert your GPU into the PCIe slot on the motherboard and secure it with screws. The case supports GPUs up to 410mm in length (270mm with side radiator).

6. Kabelmanagement

The CX700 provides 23mm of cable management space behind the motherboard tray. Route cables neatly using the provided cable ties and routing holes to ensure optimal airflow and a clean build.

Bedienungsanleitung

Sobald alle Komponenten installiert und die Kabel angeschlossen sind, können Sie Ihr System einschalten.

• Netzschalter: Located on the front access panel. Press to power on or off your system.
• LED-Steuertaste: Also on the front access panel. Use this button to cycle through various ARGB lighting modes for the pre-installed fans.
• USB-Anschlüsse: The front panel includes 1 x USB 3.0 and 1 x Type-C 3.2 Gen 2 port for convenient peripheral connectivity.
• Audiobuchse: A combined headphone/mic combo jack is available on the front panel.

Figure 3: Front I/O Panel of the ANTEC CX700. This image highlights the accessible ports and control buttons for user convenience.

Wartung

Regular maintenance ensures the longevity and optimal performance of your gaming case.

• Staubreinigung: Periodically clean dust filters and interior components using compressed air or a soft brush. Dust accumulation can impede airflow and cooling performance.
• Panelreinigung: Wipe the tempered glass panels with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.
• Kabelmanagement-Check: Ensure cables remain neatly organized and do not obstruct airflow.

Fehlerbehebung

In diesem Abschnitt werden häufig auftretende Probleme behandelt.

• Kein Strom:
  • Prüfen Sie, ob das Netzteil ordnungsgemäß an die Wandsteckdose und das Motherboard angeschlossen ist.
  • Ensure the power button cable from the case is correctly connected to the motherboard's front panel header.
• Lüfter drehen sich nicht/ARGB leuchtet nicht:
  • Prüfen Sie, ob die Lüfterstromkabel fest mit dem Motherboard oder der Lüftersteuerung verbunden sind.
  • Ensure ARGB cables are properly connected to the motherboard's ARGB header or the integrated LED controller.
  • Use the LED control button on the front panel to cycle through modes.
• Schlechte Luftzirkulation/Überhitzung:
  • Reinigen Sie Staubfilter und interne Bauteile.
  • Stellen Sie sicher, dass die Ventilatoren für einen optimalen Luftstrom (Zuluft/Abluft) richtig ausgerichtet sind.
  • Check for obstructions to airflow inside the case.

Technische Daten

Detailed technical specifications for the ANTEC CX700 ATX Mid Tower Gaming Case.

Garantie und Support

For warranty information and technical support, please visit the official Antec webBesuchen Sie die Website oder kontaktieren Sie den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Offizieller Antec WebWebsite: www.antec.com