MOUNTUP MU0057-L Full Motion TV Wall Mount Instruction Manual

1. Einleitung

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your MOUNTUP MU0057-L Full Motion TV Wall Mount. Please read all instructions carefully before installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.

The MOUNTUP MU0057-L is designed to securely mount most 42-75 inch flat or curved screen televisions weighing up to 99 lbs (45 kg). It features a 30-inch extension arm, +/-90° swivel, +5°/-10° tilt, and +/-3° leveling for optimal viewFlexibilität ein.

2. Sicherheitshinweise

WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of warranty.

Gewichtskapazität: Die maximale Tragfähigkeit von 45 kg (99 lbs) darf nicht überschritten werden. Diese Halterung ist ausschließlich für die Verwendung mit den angegebenen Maximalgewichten vorgesehen. Die Verwendung mit schwereren Produkten kann zu Instabilität und damit zu Verletzungen führen.
TV-Größe: This mount is compatible with TVs from 42 to 75 inches.
VESA-Kompatibilität: Ensure your TV's VESA pattern (mounting hole spacing) is within the range of 150x100mm to 600x400mm.
Wandtyp: This mount is designed for installation on solid concrete/brick walls or single wood studs. NICHT allein in Trockenbauwände einbauen.
Professionelle Installation: If you have any doubts about your ability to safely install this mount, consult a qualified professional.
Komponentenprüfung: Before installation, verify that all components are present and undamaged. Do not use damaged or defective parts.
Werkzeuge: Verwenden Sie für die Installation geeignete Werkzeuge.

3. Packungsinhalt

Please check the package to ensure all parts are included and undamaged. If any parts are missing or damaged, contact MOUNTUP customer service.

Wandplattenbaugruppe
TV-Halterungen (2)
Montagezubehör-Set (verschiedene Schrauben, Unterlegscheiben, Abstandshalter, Dübel)
Wasserwaage
Bohrschablone
Bedienungsanleitung

4. Spezifikationen

Spezifikation	Wert
Modell	MU0057-L
Kompatibilität mit TV-Größen	42 - 75 Zoll
Gewichtskapazität	Bis zu 99 kg (45 Pfund)
VESA-Kompatibilität	150 x 100 mm bis 600 x 400 mm
Verlängerung von der Wand	3 Zoll (eingefahren) bis 30 Zoll (ausgefahren)
Schwenkbereich	+/-90°
Neigungsbereich	+5° / -10°
Pegelanpassung	+/-3°
Material	Metall
Farbe	Schwarz
Artikelgewicht	13.77 Pfund

Notiz: The TV plate is offset approximately 8.5 inches (215mm) from the wall plate center. Consider this when positioning your TV on the wall.

Diagram showing the offset between the TV plate center and the wall plate center, indicating an 8.5 inch (215mm) difference.

Image: TV Plate Offset Diagram

5. Installationsanweisungen

5.1 Prüfungen vor der Installation

TV-Kompatibilität prüfen: Check your TV's size, weight, and VESA mounting pattern. The VESA pattern refers to the four mounting holes on the back of your TV.

Diagram showing various VESA patterns from 150x100mm to 600x400mm, with a note that 100x100mm is not supported.

Image: Available VESA Patterns and TV Mounting Holes

Wandtyp identifizieren: Determine if your wall is solid concrete/brick or a single wood stud.

Image illustrating compatibility with Concrete/Brick Wall and Single Wood Stud, with a warning not to mount on drywall alone.

Image: Diverse Wall Compatibility

Check TV Ports: Ensure the mount will not block any necessary ports on your TV.

Image showing a TV with the mount attached, highlighting that ports should not be blocked.

Image: Ensure Mount Won't Block Ports

5.2 Schrittweise Installation

The installation process involves three main steps:

Mount Brackets to TV: Attach the TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are securely fastened.
Wandplatte installieren: Using the provided drilling template and bubble level, mark and drill pilot holes in your wall. Secure the wall plate assembly to the wall with the appropriate anchors and lag bolts.
Fernseher an der Wandplatte befestigen: Carefully lift your TV with the attached brackets and hook them onto the wall plate. Secure the TV to the wall plate using the safety screws or locking mechanisms.

Image showing a hand screwing a bracket onto the back of a TV.

Image showing a person tightening a bolt on the wall plate assembly with a wrench.

Image showing a TV being hung onto the installed wall plate.

Image of the drilling template included with the mount.

Image: Easy & Quick 3-Step Installation Overview

6. Betrieb und Anpassungen

6.1 Verlängerung und Einzug

The mount allows your TV to extend up to 30 inches from the wall and retract to approximately 3 inches, providing flexibility for various viewing positions and saving space when not in use.

Image demonstrating the TV mount extending 30 inches and retracting to 3 inches from the wall.

Image: Mount Extension and Retraction

6.2 Schwenkverstellung

The articulating arm allows for a smooth +/-90° swivel, enabling you to adjust the TV's angle to suit different viewing areas within a room, including corner mounting scenarios.

Image showing a TV mounted in a corner, swiveled to face different directions, illustrating the wide swivel range.

Image: Wide Swivel Range for Corner Mounting

6.3 Neigungseinstellung

Adjust the TV's vertical angle with a +5°/-10° tilt range. This feature helps reduce glare from lights or windows and provides a comfortable viewing-Winkel.

6.4 Nivellierungsanpassung

After installation, you can make minor horizontal adjustments of +/-3° to ensure the TV is perfectly level.

Image showing a TV being leveled after installation with a +/-3 degree adjustment, and tilted to reduce glare with a +5/-10 degree range.

Image: Level and Tilt Adjustments

7. Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und den sicheren Betrieb Ihrer TV-Wandhalterung.

Reinigung: Reinigen Sie die Halterung mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel, die die Oberfläche beschädigen könnten.
Überprüfung der Befestigungselemente: Überprüfen Sie regelmäßig alle Schrauben und Bolzen, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach.
Bewegungsprüfung: Test the mount's full range of motion (extension, retraction, swivel, tilt) occasionally to ensure smooth operation.

8. Fehlerbehebung

Sollten während oder nach der Installation Probleme auftreten, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:

Der Fernseher ist nicht waagerecht: Use the +/-3° post-installation leveling feature to adjust the TV's horizontal position.
Die Halterung fühlt sich locker an: Re-check all wall and TV fasteners to ensure they are securely tightened. Do not overtighten.
Difficulty moving the arm: The mount's joints may be stiff initially. Apply gentle force. If persistent, ensure no cables are snagged.
TV not fitting VESA pattern: Double-check your TV's VESA pattern against the mount's specifications (150x100mm to 600x400mm). If incompatible, the mount cannot be used.

9. Garantie und Support

MOUNTUP is dedicated to providing quality products and customer satisfaction. While specific warranty details are not provided in this document, MOUNTUP offers comprehensive support.

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact MOUNTUP customer service. Experts are available 7 days a week to provide support and advanced technology solutions.

For more information or to contact support, please visit the official MOUNTUP store or webWebsite.