BoxWave MagnetoSnap PD AllCharge Kabel (100W) Bedienungsanleitung

Einführung

This manual provides instructions for the BoxWave MagnetoSnap PD AllCharge Cable (100W). This versatile magnetic charging cable is designed to provide efficient power delivery and data transfer for a wide range of devices, including the Typhur Sync Quad. Please read this manual thoroughly before use to ensure proper operation and longevity of your product.

Produkt überview

The BoxWave MagnetoSnap PD AllCharge Cable is a high-performance charging and data transfer solution. It features a durable braided nylon cable and a unique magnetic design with interchangeable tips, allowing a single cable to serve multiple devices. Key features include:

• Hohe Leistungsabgabe: Supports up to 100W Power Delivery for fast charging of laptops, tablets, and smartphones.
• Magnetic Interchangeable Tips: Includes USB-C, Micro USB, and an Apple-compatible connector for broad device compatibility.
• Schnelle Datenübertragung: Capable of blazing-fast data transfers up to 480Mbps.
• Langlebige Konstruktion: Braided nylon cable enhances strength and durability, reducing tangles and fraying.
• Built-in USB Adapter: Features a reversible USB-A to USB-C adapter for compatibility with various power sources.

Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• 1 x BoxWave MagnetoSnap PD AllCharge Cable (100W)
• 1 x Magnetic USB-C Connector Tip
• 1 x Magnetic Micro USB Connector Tip
• 1 x Magnetic Apple-compatible Connector Tip

Aufstellen

Follow these steps to set up and begin using your MagnetoSnap PD AllCharge Cable:

1. Wählen Sie den richtigen Tipp aus: Choose the appropriate magnetic connector tip (USB-C, Micro USB, or Apple-compatible) for your device's charging port.
2. Insert Tip into Device: Carefully insert the chosen magnetic tip into your device's charging port. Ensure it is fully seated. This tip can remain in your device for convenience.
3. Connect Cable to Tip: Bring the main cable's magnetic end close to the tip inserted in your device. The magnets will automatically snap the cable into place, establishing a connection.
4. An Stromquelle anschließen: Plug the other end of the MagnetoSnap cable into a compatible power source. The cable features a built-in USB-A adapter that can be pulled away to reveal a USB-C connector, allowing connection to either a traditional USB-A port or a USB-C PD charger.

Bedienungsanleitung

Aufladen Ihres Geräts

Once the magnetic tip is inserted into your device and the cable is connected to a power source, your device will begin charging. The MagnetoSnap cable supports Power Delivery up to 100W, enabling rapid charging for compatible devices. Ensure your power adapter also supports the desired wattage for optimal charging speeds.

Datenübertragung

To transfer data, connect the MagnetoSnap cable to your device (via the magnetic tip) and then plug the other end into a computer's USB-A or USB-C port. The cable supports data transfer speeds of up to 480Mbps, allowing for quick synchronization of files.

Interchanging Tips

The magnetic design allows for easy swapping of connector tips. Simply pull the cable away from the inserted tip to disconnect. To connect to a different device, insert the appropriate magnetic tip into that device's port and then snap the cable onto it.

Wartung

To ensure the longevity and optimal performance of your BoxWave MagnetoSnap PD AllCharge Cable, follow these maintenance guidelines:

• Sauber halten: Regularly wipe the cable and magnetic tips with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Vorsichtig handhaben: While the braided nylon cable is durable, avoid excessive bending, twisting, or pulling, especially near the connectors.
• Richtig lagern: When not in use, coil the cable neatly. Avoid tangling or knotting, which can stress the internal wires.
• Protect Magnetic Tips: If you remove the magnetic tips from your devices, store them in a safe place to prevent loss or damage.
• Vermeiden Sie den Kontakt mit Flüssigkeiten: Do not expose the cable or tips to water or other liquids.

Fehlerbehebung

If you encounter issues with your MagnetoSnap PD AllCharge Cable, refer to the following common problems and solutions:

• Gerät wird nicht geladen:
  • Stellen Sie sicher, dass die magnetische Spitze vollständig in den Ladeanschluss Ihres Geräts eingeführt ist.
  • Prüfen Sie, ob die magnetische Verbindung zwischen Kabel und Spitze sicher ist.
  • Check that the cable is firmly plugged into a working power source.
  • Confirm your power source (wall adapter, power bank, computer port) is functional and provides sufficient power.
  • Try a different magnetic tip or a different device to isolate the issue.
• Langsamer Ladevorgang:
  • Ensure your power adapter supports Power Delivery (PD) and provides adequate wattage (up to 100W for optimal speed).
  • Close unnecessary applications on your device that may consume significant power.
  • Check for debris in the magnetic tip or device port that might hinder connection.
• Datenübertragung funktioniert nicht:
  • Ensure the cable is securely connected to both your device and the computer.
  • Verify that your device is set to allow data transfer (e.g., 'File Transfermodus auf Android-Geräten).
  • Versuchen Sie, eine Verbindung zu einem anderen USB-Anschluss an Ihrem Computer herzustellen.
• Die magnetische Verbindung ist schwach:
  • Clean the magnetic surfaces of both the cable and the tips to remove any metallic dust or debris.
  • Ensure the tip is not damaged or bent.

Technische Daten

Garantie und Support

For warranty information or technical assistance, please contact BoxWave customer support directly. Refer to the product packaging or the official BoxWave webAuf dieser Website finden Sie die aktuellsten Kontaktdaten und Garantiebedingungen.