Philips 14T5HE/46-850/IF1/G/DIM 14W T5 LED Bulb User Manual

Einführung

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Philips 14T5HE/46-850/IF1/G/DIM 14W T5 LED Bulb. Please read this manual thoroughly before use and retain it for future reference.

This LED bulb is designed as a direct replacement for traditional 4-foot T5 High Efficiency (HE) 28W fluorescent lamps and requires an electronic ballast for operation. It is a Plug & Play solution, ensuring compatibility with specific existing fixtures.

Wichtige Sicherheitsinformationen

WARNUNG: Only use to replace 4' T5 HE (High Efficiency) 28W lamps (not HO lampS).
Verify ballast type (28W T5 HE Ballasts) before installation.
Check ballast compatibility before using this product. Incompatible ballasts may cause improper operation or damage to the bulb.
Always disconnect power before installation or removal.
Die Glühbirne darf nicht auseinandergenommen oder verändert werden.
Ensure the bulb is securely seated in the fixture.
This product is designed for indoor use in dry locations unless otherwise specified by the fixture.

Bildbeschreibung: A yellow warning label with black text. The text states: "WARNING Only used to replace 4' T5 HE (High Efficiency) 28W lamps (not HO lamps). Verify ballast type (28W T5 HE Ballasts) before installation. Check ballast compatibility before using product." Below the English text, the same warning is provided in French.

Packungsinhalt

Your package contains 10 Philips 14T5HE/46-850/IF1/G/DIM 14W T5 LED Bulbs.

Packaging for Philips T5 LED bulbs, showing a pack of 10

Bildbeschreibung: A close-up of the product packaging, indicating a "10_pack" of Philips LED tubes. The image shows the end of a box with a label confirming it contains 10 lamps.

Setup und Installation

Stromabschaltung: Vor Beginn der Installation muss sichergestellt werden, dass die Stromzufuhr zur Leuchte am Sicherungsautomaten vollständig abgeschaltet ist.
Vorschaltgerätkompatibilität prüfen: Confirm that your existing fixture uses a compatible 28W T5 High Efficiency (HE) electronic ballast. This LED bulb is a Plug & Play type and requires an electronic ballast. It is compatible with GE F28W/T5/850/Eco and Philips F28T5/850/Alto bulbs.
Vorhandenes L entfernenamp: Carefully remove the old fluorescent T5 lamp von der Halterung.
LED-Glühbirne installieren: Insert the Philips 14T5HE/46-850/IF1/G/DIM LED bulb into the fixture's G5 bi-pin sockets. Ensure both pins on each end are fully seated.
Sichere Installation: Gently twist the bulb if necessary to ensure it is firmly in place and making proper electrical contact.
Strom wiederherstellen: Sobald die Glühbirne sicher installiert ist, schalten Sie die Leuchte am Sicherungsautomaten wieder in die Stromversorgung ein.
Testbetrieb: Turn on the light switch to verify the LED bulb is functioning correctly.

Bildbeschreibung: Eine Nahaufnahme view of the end of a Philips LED tube, showing the G5 bi-pin base. The label on the bulb indicates "TYPE A LAMP" and "Use only with electronic ballasts."

Bedienungsanleitung

The Philips 14T5HE/46-850/IF1/G/DIM LED bulb operates as a direct replacement for compatible T5 fluorescent lamps. Once installed in a fixture with a compatible electronic ballast and power is supplied, the bulb will illuminate when the fixture's switch is turned on.

Dimmbare Funktionalität: This bulb is dimmable, provided the existing electronic ballast and dimmer switch are compatible with dimmable T5 LED lamps. Consult your ballast and dimmer specifications for compatibility.
Sofort ein: Unlike some fluorescent lamps, this LED bulb provides instant full brightness upon switching on, with no warm-up time.

Wartung

Philips LED bulbs are designed for long-term, maintenance-free operation. Minimal maintenance is required.

Reinigung: Ensure power is disconnected before cleaning. Gently wipe the bulb with a soft, dry, or slightly damp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
Ersatz: When the bulb reaches the end of its operational life, replace it with another compatible Philips 14T5HE/46-850/IF1/G/DIM LED bulb. Follow the installation steps outlined in the "Setup and Installation" section.

Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Glühbirne leuchtet nicht.	Kein Strom am Gerät. Die Glühbirne sitzt nicht richtig. Incompatible or faulty electronic ballast. Defekte Glühbirne.	Prüfen Sie den Sicherungsautomaten und den Wandschalter. Ensure bulb pins are fully inserted into sockets. Verify ballast compatibility. If incompatible or faulty, replace the ballast. Test with a known working bulb.
Die Glühbirne flackert oder dimmt unerwartet.	Incompatible or failing electronic ballast. Wackelkontakt. Inkompatibler Dimmerschalter (falls zutreffend).	Verify ballast compatibility and condition. Stellen Sie sicher, dass die Glühbirne fest sitzt. Confirm dimmer switch is compatible with dimmable T5 LED lamps.

Technische Daten

Modellname:	14T5HE/46-850/IF1/G/DIM
Teilenummer:	476523
Marke:	Signify (Philips)
Lichtart:	LED
Wastage:	14 Watt
Equivalent Fluorescent:	28W T5 HE (High Efficiency)
Lampensockel:	G5 Bi-Pin
Farbtemperatur:	5000 Kelvin
Bandtage:	120 Volts (Ballast Dependent)
Besonderheit:	Dimmable (with compatible ballast/dimmer), Plug & Play
Länge:	46 Zoll
Material:	Plastik
Item Weight (per 10-pack):	20 Pfund
GTIN:	50046677476521

Philips T5 LED bulb with specifications printed on it

Bildbeschreibung: A close-up of the Philips LED tube, showing detailed specifications printed on the bulb itself. Information visible includes "14T5HE/46-850/IF1/G/DIM", "Use only with electronic ballasts", model numbers, and compliance marks like UL and RoHS.

Garantie und Support

For warranty information or technical support regarding your Philips LED bulb, please refer to the official Signify (Philips) webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.

Hersteller: Philips (Signify)

Teilenummer: 476523

	Interact Pro: Einfaches, effektives und intelligentes Beleuchtungssystem für Unternehmen Entdecken Sie Interact Pro, das drahtlose Smart-Lighting-System von Signify, das Energieeffizienz, Komfort und fortschrittliche Funktionen für Büros, Industrie und Schulen bietet. Erfahren Sie mehr über Systemeinrichtung, Vorteile, Hardware und Anwendungsbereiche.
	Signify MultiOne Mobile User Manual v1.7: Driver Configuration and NFC Scanner Guide Comprehensive user manual for the Signify MultiOne Mobile app. Learn to configure Philips and Advance lighting drivers using NFC and Bluetooth, manage features like ALO, AOC, DynaDimmer, and DALI, and utilize the external NFC scanner for efficient driver management and cloning.
	Philips Signify Luminaire Dismantling Recommendation for End-of-Life Disposal Detailed guide from Signify on how to dismantle Philips luminaires for proper end-of-life disposal, covering component breakdown, material recycling, and disposal recommendations. Includes a parts list and step-by-step dismantling process.
	LS & SCG Dismantling Instructions (After End of Life) for EM259C WL/CM Exit Sign Provides detailed dismantling instructions for the LS & SCG EM259C WL/CM Exit Sign M3 ELW WH after its end of life, including safety precautions, step-by-step procedures, a component list, and environmental disposal guidelines.
	Philips PV Vertical Panel 200Wp Installation Guide \| Signify This guide provides detailed instructions for the installation of the Philips PV Vertical Panel 200Wp by Signify. Learn about mounting, connections, dimensions, and safety precautions for a secure and efficient setup.
	Signify MC Gateway Technical Specifications and Installation Guide Detailed technical specifications, system description, installation instructions, and safety information for the Signify MC Gateway, a device for MasterConnect lighting systems.

Signify 14T5HE/46-850/IF1/G/DIM