Einführung
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your RESTMO Sprinkler Timer. Please read this manual carefully before use to ensure proper function and longevity of your device.
Bild: Vorderseite view of the RESTMO 2-Zone Sprinkler Timer, displaying its large LCD screen, control dial, and brass connections.
Produkt überview
Hauptmerkmale
- Reliable & Leak-Proof Design: Features pure brass inlet and outlet metal threads for enhanced durability and high working pressure (max. 120psi) to prevent water leakage. Weatherproof construction with UV-resistant material.
- Dual Independent Zones: Two independent outlets, each capable of setting up to 3 separate watering programs.
- Multiple Programming Options: Each zone supports 3 distinct programs (P1, P2, P3) for a total of 6 customizable schedules.
- Flexible Watering Schedules: Watering frequency from 1-23 hours or 1-30 days. Watering duration from 1 minute to 299 minutes.
- Benutzerfreundliche Oberfläche: Large 3.2-inch LCD display for easy readability. Oversized dial for setting clock, start time, duration, and frequency.
- Manual & Rain Delay Functions: Manual watering without interrupting preset programs. Long press delay button to pause programs for 0, 24, 48, or 72 hours during rainy conditions.
Komponenten
Image: Detailed diagram illustrating the components of the RESTMO Sprinkler Timer, including the LCD screen, control dial, buttons, and brass inlet/outlet dimensions.
- Brass Inlet: Connects to faucet (3/4" NH thread).
- Brass Outlets (x2): Connects to hoses (3/4" NH thread).
- LCD Bildschirm: Displays time, program settings, and zone status.
- Einstellrad: Used to navigate through settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON/OFF).
- OK-Taste: Bestätigt die Auswahl.
- +/- Tasten: Adjust values and activate Delay function.
- ZN/P Button: Switches between zones (Left/Right) and selects programs (P1/P2/P3).
- MANUELLE Taste: Aktiviert die manuelle Bewässerung.
- Batteriefach: Located on the back, requires 2 AA alkaline batteries.
Aufstellen
1. Einlegen der Batterie
- Suchen Sie das Batteriefach auf der Rückseite des Timers.
- Schieben Sie die Batterieabdeckung ab.
- Insert two (2) new AA alkaline batteries (not included), ensuring correct polarity (+/-).
- Bringen Sie die Batterieabdeckung wieder fest an.
Bild: View of the open battery compartment, showing the correct placement of two AA batteries.
2. Anschließen des Timers
- Stellen Sie sicher, dass der Wasserhahn abgedreht ist.
- Thread the brass inlet of the timer onto your outdoor faucet. Hand-tighten until secure. The 360° swivel brass inlet allows for easy positioning.
- Connect your garden hoses or drip irrigation lines to the brass outlets at the bottom of the timer. Ensure a tight, leak-proof connection.
- Turn on the faucet fully. The timer is designed to withstand high pressure, but ensure there are no leaks at the connections.
Image: The sprinkler timer connected to a faucet, with close-ups of the pure brass inlet thread and pure brass outlet, emphasizing durability and leak-proof design.
Bedienungsanleitung
1. Einstellen der Uhr
- Drehen Sie den Drehknopf auf UHR EINSTELLEN.
- Die Stundenziffern blinken. Verwenden Sie die +/- Tasten zum Einstellen der Stunde.
- Drücken OK to confirm the hour. The minute digits will flash.
- Verwenden Sie die +/- Tasten zum Einstellen der Minuten.
- Drücken OK to confirm the minutes. The day of the week will flash.
- Verwenden Sie die +/- buttons to select the current day (e.g., MO for Monday).
- Drücken OK to save the clock settings.
2. Programming Watering Schedules (P1, P2, P3)
Each zone (Left and Right) can have up to three independent programs (P1, P2, P3). You can switch between zones using the ZN/P Taste.
Bild: Eine Nahaufnahme view of the LCD screen, illustrating the display of program settings (P1, P2, P3) and current time.
- Zone auswählen: Drücken Sie kurz die ZN/P button to switch between ZONE L (Left) and ZONE R (Right).
- Programm auswählen: Drücken Sie lange die ZN/P button to cycle through P1, P2, P3. Select the program you wish to set.
- Startzeit einstellen:
- Drehen Sie den Drehknopf auf STARTZEIT.
- Verwenden +/- to set the desired start hour and minute.
- Drücken OK zur Bestätigung.
- Einstellen der Dauer:
- Drehen Sie den Drehknopf auf WIE LANGE.
- Verwenden +/- to set the watering duration from 1 minute to 299 minutes.
- Drücken OK zur Bestätigung.
- Einstellen der Häufigkeit (Frequenz):
- Drehen Sie den Drehknopf auf WIE OFT.
- Verwenden +/- to set the watering frequency:
- Every 1-23 hours.
- Alle 1-30 Tage.
- Specific days of the week (e.g., MO, TU, WE...).
- Drücken OK zur Bestätigung.
- Programm aktivieren: Drehen Sie den Drehknopf auf ON. The timer will now run according to your programmed schedules. To turn off all programs, rotate the dial to AUS.
Image: Visual representation of setting up three distinct watering programs (P1, P2, P3) with different start times, durations, and frequencies.
3. Manuelle Bewässerung
The manual watering function allows for immediate watering without affecting your preset programs.
- Stellen Sie sicher, dass der Drehknopf auf eingestellt ist. ON.
- Drücken Sie lange die HANDBUCH button. The display will show a flashing duration.
- Verwenden Sie die +/- Tasten zum Einstellen der gewünschten manuellen Bewässerungsdauer (1 bis 299 Minuten).
- Drücken OK um die manuelle Bewässerung zu starten.
- To stop manual watering, long press the HANDBUCH button again, or rotate the dial to AUS und dann zurück zu ON.
Image: Instructions for activating manual watering by long-pressing the MANUAL button, and for activating rain delay by long-pressing the DELAY button.
4. Regenverzögerungsfunktion
The rain delay function temporarily pauses your watering programs to conserve water during rainy periods.
- Stellen Sie sicher, dass der Drehknopf auf eingestellt ist. ON.
- Drücken Sie lange die VERZÖGERUNG button. The display will show "0h".
- Verwenden Sie die +/- buttons to select the desired delay duration: 24 hours, 48 hours, or 72 hours.
- Drücken OK to activate the rain delay. The timer will resume its programmed schedule after the selected delay period.
- To cancel the rain delay, long press the VERZÖGERUNG button again until "0h" is displayed, then press OK.
Image: The timer displaying the rain delay function, showing options to delay watering for 0, 24, 48, or 72 hours.
5. Zonenauswahl
The RESTMO Sprinkler Timer features two independent zones (Left and Right) that can be controlled separately.
- Drücken Sie kurz die ZN/P button to toggle between ZONE L (Left) and ZONE R (Right).
- When setting programs, ensure you are in the correct zone (L or R) for which you intend to create or modify a schedule.
Image: The timer displaying "ZONE L" and "ZONE R", with an arrow pointing to the ZN button, indicating how to switch between the left and right watering zones.
Wartung
- Batteriewechsel: Replace batteries annually or when the low battery indicator appears on the LCD screen. Always use new AA alkaline batteries.
- Reinigung: Clean the timer's exterior with a soft, damp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Filterbildschirm: Periodically check the filter screen inside the brass inlet for debris. If clogged, remove and rinse it under running water.
- Überwinterung: Before freezing temperatures, disconnect the timer from the faucet and hoses. Remove batteries. Store the timer indoors in a dry, frost-free location. Failure to do so may result in damage not covered by warranty.
- Leckprävention: Ensure all connections are hand-tightened. If leaks occur, check for worn washers and replace if necessary.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Timer not turning on/LCD blank. | Defekte oder falsch eingesetzte Batterien. | Replace batteries with new AA alkaline batteries. Ensure correct polarity. |
| Water not flowing. | Faucet is off; timer is set to OFF; low water pressure; clogged filter; program not set correctly. | Turn on faucet. Rotate dial to ON. Check water pressure (8-120 psi required). Clean inlet filter. Verify program settings. |
| Timer leaks at connections. | Lose Verbindungen; verschlissene Unterlegscheiben; beschädigte Gewinde. | Tighten connections. Replace rubber washers if worn. Inspect threads for damage. |
| Programs not running at scheduled times. | Timer set to OFF; incorrect clock setting; rain delay active; program deleted or incorrectly set. | Ensure dial is ON. Reset clock. Check if rain delay is active. Re-program schedules. |
| LCD screen is faded or unreadable. | Exposure to direct, intense sunlight/heat; low battery. | Relocate timer to a shaded area if possible. Replace batteries. If problem persists, contact customer support. |
Technische Daten
- Modell: O-HT-2
- Inlet/Outlet Thread: 3/4" NH (pure brass)
- Independent Zones: 2
- Independent Programs: Up to 3 per zone (P1, P2, P3)
- Arbeitsdruck: 8 - 120 PSI (0.5 - 8 Bar)
- Maximale Durchflussrate: 10 GPM (35 LPM)
- Arbeitstemperatur: 38 - 120°F (3 - 50°C)
- Bewässerungshäufigkeit: 1-23 hours or 1-30 days
- Bewässerungsdauer: 1 Minute zu 299 Minuten
- Energiequelle: 2 x AA-Alkalibatterien (nicht im Lieferumfang enthalten)
- Bildschirmgröße: 3.2 Zoll
- Abmessungen: 3" T x 5" B x 3" H (ungefähr)
- Gewicht: 1.06 Pfund (0.48 kg)
- Material: Brass, UV-resistant plastic
Garantie und Support
Restmo is committed to providing reliable and intelligent watering solutions. For any questions, concerns, or technical assistance regarding your sprinkler timer, please contact Restmo Customer Service.
While specific warranty details are not provided in this manual, Restmo aims to ensure customer satisfaction. Please retain your proof of purchase for any warranty claims.
For further support, visit the official Restmo store or contact their customer service channels as provided with your product packaging or on their official webWebsite.
Image: The official Restmo brand logo.
