Solid State Logic SSL 18 Benutzerhandbuch

Einführung

The Solid State Logic SSL 18 is a high-performance 26-input, 28-output USB audio interface designed for professional studio recording and production. It features cutting-edge 32-bit/192 kHz converters, eight SSL-designed mic preamps, and extensive connectivity options to deliver exceptional audio quality and flexibility for your creative workflow.

Solid State Logic SSL 18 front view — Front view of the Solid State Logic SSL 18 audio interface.

Aufstellen

1. Auspacken und Inspektion

Carefully remove the SSL 18 from its packaging. Verify that all components are present, including the interface unit, USB cable, and power supply. Inspect the unit for any signs of damage.

2. Software- und Treiberinstallation

Before connecting the SSL 18 to your computer, visit the official Solid State Logic website to download and install the latest drivers and control software for your operating system (Windows or macOS). Follow the on-screen instructions provided by the installer.

3. Anschließen der Hardware

Stromanschluss: Connect the included power supply to the 'DC IN' port on the rear of the SSL 18 and then plug it into a suitable power outlet.
USB-Verbindung: Connect the SSL 18 to your computer using the provided USB cable. Use a high-quality USB port on your computer for optimal performance.
Audioanschlüsse:
- Eingänge: Connect microphones, line-level instruments, or other audio sources to the XLR/TRS combo jacks on the front and rear panels.
- Ausgaben: Connect your studio monitors to the balanced line outputs (1-2 for main monitors) on the rear panel. Additional line outputs are available for other monitoring or outboard gear.
- Kopfhörer: Plug your headphones into the dedicated headphone jacks on the front panel.

Solid State Logic SSL 18 rear view mit Verbindungen — Rear panel connections of the SSL 18, showing power, USB, MIDI, S/PDIF, ADAT, and balanced line outputs.

Close-up of SSL 18 rear panel connections — Detaillierte view of the rear panel, highlighting digital and analog I/O.

Operating the SSL 18

1. Einschalten und Ersteinrichtung

Press the power button on the front panel to turn on the SSL 18. The unit will initialize, and the status indicators will illuminate. Ensure your computer recognizes the device in your Digital Audio Workstation (DAW) or system audio settings.

2. Eingangsverstärkungsregelung

Each input channel features a dedicated 'GAIN' knob. Adjust this knob to set the input level for your connected microphone or instrument. Monitor the input meters on the front panel to ensure levels are healthy without clipping (red indicators).

3. 4K Analogue Enhancement

The SSL 18 includes a '4K' button on each input channel, which activates a legacy 4K analogue enhancement mode. This feature adds a subtle harmonic richness and high-frequency lift inspired by classic SSL 4000 series consoles. Experiment with this feature to enhance your sound.

4. Kopfhörerausgänge

The SSL 18 provides two independent headphone outputs, each with its own volume control. These can be configured for different types of headphones (Standard, High Sensitivity, High Impedance) via the control software to optimize performance.

5. Monitor Control and Speaker Switching

The monitor section allows you to control the main output volume. The 'ALT' button enables alternative speaker switching, allowing you to quickly switch between two sets of monitors (connected to outputs 1-2 and 3-4) for critical listening. The 'CUT' button mutes the main outputs.

6. Gegensprechfunktion

The 'TALK' button activates the built-in talkback microphone, allowing you to communicate with artists in a separate recording space. The talkback signal can be routed to specific outputs as configured in the control software.

Solid State Logic SSL 18 in use, close-up of front panel — Nahaufnahme view of the SSL 18 front panel controls, including gain knobs, 4K buttons, and metering.

Detaillierte view of SSL 18 front panel controls — Closer look at the master section, headphone controls, and power button.

Wartung

To ensure the longevity and optimal performance of your SSL 18, follow these maintenance guidelines:

Reinigung: Use a soft, dry, lint-free cloth to clean the exterior of the unit. Avoid abrasive cleaners, solvents, or waxes. Do not spray liquids directly onto the unit.
Belüftung: Ensure the unit has adequate ventilation. Do not block the ventilation slots on the sides of the chassis.
Firmware-Updates: Periodically check the Solid State Logic website for firmware and software updates. Keeping your device updated ensures compatibility and access to the latest features and bug fixes.
Lagerung: Bei längerer Nichtbenutzung sollte das Gerät an einem kühlen, trockenen Ort, fern von direkter Sonneneinstrahlung und extremen Temperaturen aufbewahrt werden.

Fehlerbehebung

If you encounter issues with your SSL 18, try the following troubleshooting steps:

Kein Strom: Ensure the power cable is securely connected to both the unit and the power outlet. Verify the power outlet is active.
Keine Tonausgabe:
- Überprüfen Sie alle Audiokabelverbindungen (Eingänge, Ausgänge, Kopfhörer).
- Verify the volume levels on the SSL 18 (main monitor, headphone) and in your DAW/computer's system settings.
- Ensure the correct audio device is selected in your DAW and operating system.
Computer erkennt Gerät nicht:
- Probieren Sie einen anderen USB-Anschluss an Ihrem Computer aus.
- Ensure the latest drivers are installed. Reinstall them if necessary.
- Restart your computer and the SSL 18.
Input Signal Issues:
- Check the input gain knob for the specific channel.
- Ensure the microphone or instrument is properly connected and functioning.
- Verify phantom power (if required for your microphone) is enabled.

For persistent issues, refer to the Solid State Logic support webWebsite oder wenden Sie sich an den Kundendienst.

Technische Daten

Modellnummer	OS-Nummer:
Artikelgewicht	12 Pfund
Technische Daten	24.4 x 14.4 x 4.6 Zoll
Ursprungsland	USA
Konverter	32 Bit / 192 kHz
Mikrofonvorstufeamps	8 x SSL-designed, high-performance
Dynamic Range (Inputs)	120 dB
Dynamic Range (Outputs)	125 dB
Leitungsausgänge	10 x Balanced (configurable +9/+24 dBu)
Kopfhörerausgänge	2 x Independent, configurable
Digitale E/A	ADAT, S/PDIF
Kompatible Geräte	Personalcomputer
Betriebssystem	Windows, macOS

Garantie und Support

For detailed warranty information, please refer to the official Solid State Logic website or the documentation included with your purchase. Solid State Logic provides comprehensive support for their products.

Online-Ressourcen: Visit the Solid State Logic support page for FAQs, driver downloads, firmware updates, and additional user guides.

Kontaktieren Sie den Support: If you require further assistance, please contact Solid State Logic customer support through their official webWebsite.

	Solid State Logic SSL 12 – Kurzanleitung Eine kurze Anleitung zum Einrichten und Registrieren Ihres Solid State Logic SSL 12 USB-Audio-Interfaces, einschließlich Installationsanweisungen für Treiber und Software.
	Solid State Logic UC1 – Kurzanleitung Eine kurze Anleitung zum Einrichten und Verwenden des Solid State Logic UC1-Hardwarecontrollers, einschließlich Registrierung, Auspacken, Anbringen von Ständern, Anschließen der Hardware, Installieren der SSL 360-Software und Autorisieren von SSL Native plugins.
	Solid State Logic PURE DRIVE OCTO 8-Kanal-Mikrofonvorverstärkeramp Benutzerhandbuch Ausführliche Bedienungsanleitung für den Solid State Logic PURE DRIVE OCTO, einen 8-Kanal-Analog-Mikrofonvorverstärkeramp Mit digitaler Konnektivität, USB-Audio-Schnittstelle und PureDrive-Technologie. Erfahren Sie mehr über Funktionen, Installation, Hardware, Anschlüsse, Bedienung, Einstellungen und Spezifikationen.
	Solid State Logic SSL 2+ MKII USB-Audio-Interface – Benutzerhandbuch Ein umfassender Leitfaden zum USB-Audio-Interface Solid State Logic SSL 2+ MKII, der seine Funktionen, Einrichtung, Anschlüsse, Bedienelemente auf der Vorderseite, DAW-Integration und Best Practices für Audioaufnahme und -überwachung behandelt.
	SSL 2+ MKII USB-Audio-Interface – Benutzerhandbuch Diese umfassende Bedienungsanleitung für das Solid State Logic SSL 2+ MKII USB-Audiointerface beschreibt detailliert seine Funktionen, Einrichtung und Bedienung. Entdecken Sie, wie Sie mit den fortschrittlichen Vorverstärkern Audio in Studioqualität für Ihre Musikproduktion erzielen.amps, hochauflösende Konverter und ein mitgeliefertes Softwarepaket.
	Benutzerhandbuch für den Solid State Logic Fusion Stereo Analogfarbprozessor Ausführliches Benutzerhandbuch für den Solid State Logic Fusion Stereo Analogue Colour Processor mit detaillierten Informationen zu Funktionen, Einrichtung, Bedienung und technischen Spezifikationen. Erfahren Sie, wie Sie Ihre Mixe mit den einzigartigen analogen Signalverarbeitungsschaltungen optimieren können.

Solid State Logic 729748X2