ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

1. Einleitung

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

Bild: Überview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Produktmerkmale

• Freihändige Steuerung: Automatically detects presence and ambient light to activate or deactivate lights.
• Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
• Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
• Universelle Kompatibilität: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
• Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
• Einfache Installation: Fits standard junction boxes and requires a neutral wire.
• Langlebiges Design: Constructed with tough thermoplastic housing for impact and scratch resistance.

Bild: Detailliert view of the product features and adjustable settings on the dimmer switch.

3. Sicherheitshinweise

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

• Dieses Gerät ist für die Installation in Übereinstimmung mit dem National Electric Code und den lokalen Vorschriften vorgesehen.
• Es wird empfohlen, diese Installation von einem qualifizierten Elektriker durchführen zu lassen.
• Verwenden Sie nur Kupferdrähte.
• Für den ordnungsgemäßen Betrieb ist ein Neutralleiter erforderlich.
• This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Packungsinhalt

• ECOELER Motion Sensor Dimmer Switch
• Wandplatte
• Installationsanleitung (dieses Handbuch)
• Befestigungsschrauben
• Verdrahtungskappen

Abbildung: Produktabmessungen und mitgeliefertes Zubehör.

5. Spezifikationen

Image: Universal compatibility with various bulb types and their wattage Bewertungen.

6. Installation

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Vorinstallation

1. Strom ausschalten: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage Tester.
2. Alten Schalter entfernen: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
3. Drähte identifizieren: Identify the following wires in your electrical box:
   • Hot (Line) Wire: Leitet Strom vom Leistungsschalter.
   • Lastkabel: Wird an die Leuchte angeschlossen.
   • Neutralleiter: (Required) Typically white, often capped together with other neutral wires.
   • Erdungskabel: (Recommended) Typically bare copper or green.

6.2 Verdrahtungsanweisungen

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

• Verbinden Sie Schwarz wire from the switch to the Hot (Line) wire from the wall.
• Verbinden Sie Rot wire from the switch to the Laden wire from the wall.
• Verbinden Sie Weiß wire from the switch to the Neutral wire from the wall.
• Verbinden Sie Grün wire from the switch to the Boden wire from the wall.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Montage und Endbearbeitung

1. Carefully push all wired connections into the electrical box.
2. Mount the switch into the electrical box using the provided screws.
3. Bringen Sie die Wandplatte an.
4. Schalten Sie den Strom am Sicherungsautomaten wieder ein.