MARK ADLER Expert 5.7 Ergonomischer Bürostuhl – Benutzerhandbuch

Einführung

The MARK ADLER Expert 5.7 is an ergonomic office chair designed to provide optimal support and comfort during extended periods of sitting, whether for work or gaming. Its advanced adjustment systems allow for a personalized seating experience, promoting healthy posture and reducing fatigue. This manual provides essential information for the proper assembly, operation, and maintenance of your chair.

Image: The MARK ADLER Expert 5.7 chair, showcasing its ergonomic design and multiple adjustment points including headrest, lumbar support, armrests, and footrest.

Einrichtung und Montage

Before beginning assembly, ensure all components are present and undamaged. It is recommended to assemble the chair on a soft, clean surface to prevent scratches. An Allen key is typically included for assembly.

1. Komponenten auspacken: Nehmen Sie alle Teile vorsichtig aus der Verpackung und überprüfen Sie sie anhand der beiliegenden Teileliste.
2. Räder an der Basis befestigen: Insert the five silent nylon wheels into the reinforced nylon FX base until they click securely into place.
3. Gaslift einsetzen: Place the BIFMA Class 3 gas lift cylinder into the center hole of the assembled base.
4. Sitzmechanismus montieren: Befestigen Sie den Sitzmechanismus mit den mitgelieferten Schrauben an der Unterseite des Sitzkissens. Achten Sie darauf, dass die Vorderseite des Mechanismus mit der Vorderseite des Sitzes abschließt.
5. Armlehnen anbringen: Secure the 3D armrests to the seat base using the designated screws.
6. Rückenlehne verbinden: Attach the backrest to the seat mechanism using the appropriate screws.
7. Sitz auf Gasdruckfeder montieren: Setzen Sie den zusammengebauten Sitz und die Rückenlehne vorsichtig auf den Gasdruckfederzylinder und achten Sie darauf, dass sie mittig und stabil sitzen.
8. Install Headrest and Lumbar Support: Attach the adjustable headrest and lumbar support to the backrest as per the instructions.
9. Fußstütze anbringen: Install the retractable footrest mechanism to the underside of the seat.

Always refer to the detailed assembly diagram provided with your product for precise instructions and screw placement. Ensure all screws are tightened securely before using the chair.

Operating the Chair and Adjustments

The Expert 5.7 chair offers multiple adjustment options to customize your seating experience for optimal ergonomic support.

1. Sitzhöhenverstellung

• To raise the seat: While standing, pull the lever located on the right side of the seat upwards.
• To lower the seat: While seated, pull the same lever upwards. Adjust until your feet are flat on the floor and your knees are at a 90-degree angle.

2. Tilt Mechanism (Tilt Plus)

• To recline: Pull the lever on the left side of the seat outwards. Lean back to the desired angle.
• To lock the tilt: Push the lever inwards at your desired recline position.
• To unlock and return upright: Pull the lever outwards, lean forward slightly, and the backrest will return to its upright position.

Image: Illustration of the chair's adjustable backrest and the "Multilock" tilt mechanism, allowing for various recline positions.

3. Seat Depth Adjustment (Slide Technology)

• Locate the lever or button under the seat.
• Activate the mechanism and slide the seat forward or backward to ensure a comfortable distance between the edge of the seat and your knees, reducing pressure on your legs.

4. Einstellung der Lordosenstütze

• The lumbar support can be adjusted in both height and depth. Use the knobs or levers on the backrest to position it to comfortably support the natural curve of your lower back.

Image: A user seated in the chair, highlighting the adjustable lumbar support and the multi-directional movement of the 3D armrests for optimal back and shoulder comfort.

5. Einstellung der Kopfstütze

• The 2D adjustable headrest can be moved up and down, and tilted to provide optimal neck and head support. Adjust it to align with the curve of your neck.

Image: Close-up of the chair's adjustable headrest, demonstrating its ability to move in height and tilt for optimal cervical spine support.

6. Armlehnenverstellung

• The 3D armrests can be adjusted in height, forward/backward, and rotated inwards/outwards. Adjust them to support your forearms comfortably, keeping your shoulders relaxed.

7. Ausziehbare Fußstütze

• To extend the footrest: Pull the footrest mechanism out from under the seat.
• To retract the footrest: Push it back under the seat until it is fully stored. This feature is designed for relaxation during breaks.

Image: The MARK ADLER Expert 5.7 chair with its sliding footrest extended, illustrating its use for relaxation during work breaks.

Wartung

Regular maintenance will extend the life and performance of your MARK ADLER Expert 5.7 chair.

• Cleaning the Mesh Fabric: The breathable Mesh HD fabric can be cleaned with a soft cloth dampened with mild soap and water. Avoid harsh chemicals or abrasive cleaners. Allow to air dry completely.
• Reinigung von Untergestell und Rädern: Wipe the reinforced nylon FX base and silent nylon wheels with a damp cloth. Periodically remove any hair or debris that may accumulate around the wheel casters to ensure smooth movement.
• Komponenten prüfen: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary. Inspect the gas lift and other moving parts for any signs of wear or damage.
• Schmierung: Moving parts, such as the tilt mechanism, may benefit from occasional lubrication with a silicone-based spray to prevent squeaking and ensure smooth operation.

Fehlerbehebung

Here are solutions to common issues you might encounter with your office chair.

• Stuhlknarren:
  • Prüfen und ziehen Sie alle Schrauben fest, insbesondere jene, die den Sitz mit dem Mechanismus und der Rückenlehne verbinden.
  • Apply a small amount of silicone lubricant to moving parts of the tilt mechanism and where the gas lift meets the base.
• Schwierigkeiten bei der Höhenverstellung:
  • Ensure the gas lift lever is fully engaged when attempting to adjust.
  • Wenn die Gasdruckfeder gar nicht reagiert, muss sie möglicherweise ausgetauscht werden. Wenden Sie sich an den Kundendienst.
• Räder rollen nicht reibungslos:
  • Remove any hair, dust, or debris wrapped around the wheel casters.
  • Ensure the wheels are securely inserted into the base.
• Der Stuhl fühlt sich instabil an:
  • Verify that all screws are tightened.
  • Ensure the gas lift is properly seated in the base.
  • Check for any damage to the base or gas lift.

Technische Daten

Garantie und Support

For warranty information, technical support, or to inquire about replacement parts, please refer to the documentation included with your purchase or contact MARK ADLER customer service directly. Keep your proof of purchase for warranty claims.