BitFenix ​​CETO Basic High Airflow PC-Gaming-Gehäuse – Benutzerhandbuch

Einführung

This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix CETO Basic High Airflow PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

The BitFenix CETO Basic is designed for high airflow and features panoramic tempered glass, three pre-installed Infinity Mirroring ARGB fans (two reverse, one positive), and extensive compatibility for modern PC components.

Packungsinhalt

Vergewissern Sie sich vor der Installation, dass alle Komponenten vorhanden sind:

• BitFenix CETO Basic PC Gaming Case
• 3 x 120mm Infinity Mirroring ARGB Fans (2x Reverse, 1x Positive)
• 1 x 8+8 Pin ARGB/Fan Controller
• Zubehörbox (Schrauben, Kabelbinder, Abstandshalter usw.)
• Benutzerhandbuch (dieses Dokument)

Abbildung 1: Included components, showing the PC case, three 120mm ARGB fans, and the 8+8 pin controller for fan and lighting management.

Technische Daten

Abbildung 2: External dimensions and internal component layout overview.

Abbildung 3: Detailed internal clearances for CPU coolers, graphics cards, and cable management.

Setup und Installation

1. Vorbereitung des Falls

Carefully remove the case from its packaging. Place it on a stable, flat surface. The tempered glass side panel can be removed for easier access during component installation. The case features snap-on panels for tool-free removal.

Abbildung 4: Removing the side panel. Always handle tempered glass with care, using both hands.

2. Motherboard-Installation

Install the necessary standoffs for your motherboard form factor (ATX, Micro-ATX, or Mini-ITX). Carefully place your motherboard into the case, aligning it with the standoffs and I/O shield opening. Secure the motherboard with screws.

3. Installation des Netzteils (PSU)

The BitFenix CETO Basic supports ATX power supplies up to 200mm in length, mounted at the bottom of the case. Slide the PSU into its designated bay and secure it with screws from the rear of the case.

4. Installation des Speichermediums

The case supports 2+1 3.5" drive bays and 2+1 2.5" drive bays. Install your HDDs and SSDs into the appropriate trays or mounting points and secure them.

Abbildung 5: Storage drive bay locations and PSU mounting area.

5. Installation der Grafikkarte (GPU)

The case accommodates GPUs up to 390mm in length. Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the retention mechanism or screws.

6. Installation des Kühlsystems (Lüfter und Kühler)

The case comes with three 120mm Infinity Mirroring ARGB fans pre-installed for enhanced airflow. The top panel supports radiators up to 360mm/280mm/240mm (max thickness 27mm), and the rear supports a 120mm radiator.

Abbildung 6: Radiator and fan mounting options within the case.

7. Kabelmanagement

Utilize the 20mm cable management space behind the motherboard tray to route and secure cables. This improves airflow and aesthetics. Connect all necessary power cables from the PSU to your components and the front panel I/O cables to your motherboard.

The pre-installed ARGB fans connect to the included 8+8 Pin controller. Connect this controller to your power supply via SATA and to your motherboard's ARGB header (if available) for software control, or use the case's LED/Reset button for manual control.

Bedienung der Gehäusefunktionen

Vorderes E/A-Panel

Das vordere I/O-Panel bietet bequemen Zugriff auf wichtige Anschlüsse und Bedienelemente:

• 1 x Typ-C-Anschluss: For modern USB-C devices.
• 2 x USB 3.0-Anschlüsse: Für High-Speed-USB-Geräte.
• LED/Reset Button: Controls ARGB lighting modes or functions as a system reset button depending on motherboard connection.
• Netzschalter: Zum Ein- und Ausschalten Ihres Systems.

Abbildung 7: Front I/O panel layout and dust filter locations.

ARGB-Beleuchtungssteuerung

The pre-installed Infinity Mirroring ARGB fans offer striking visual effects. Control their lighting via the included 8+8 Pin controller. If your motherboard supports ARGB synchronization (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Biostar RGB Sync), connect the controller to the motherboard's 3-pin ARGB header to manage lighting through software. Otherwise, use the case's LED/Reset button to cycle through pre-set lighting modes.

Abbildung 8: The BitFenix CETO Basic case with its illuminated ARGB fans, highlighting the aesthetic design.

Abbildung 9: Airflow optimization within the case, demonstrating the path of cool air intake and hot air exhaust for efficient cooling.

Wartung

Reinigung des Staubfilters

The BitFenix CETO Basic case is equipped with magnetic dust filters on the top, bottom, and right steel panel. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your system.

1. Gently remove the magnetic dust filters from their respective locations.
2. Reinigen Sie die Filter mit Druckluft, einer weichen Bürste oder durch Abspülen mit Wasser (stellen Sie sicher, dass sie vor dem Wiedereinsetzen vollständig trocken sind).
3. Reattach the magnetic filters to the case.

Abbildung 10: Locations of removable magnetic dust filters for easy maintenance.

Allgemeine Reinigung

Wischen Sie die Außenseite des Gehäuses mit einem weichen, fusselfreien Tuch ab.amp Verwenden Sie kein Tuch. Vermeiden Sie die Verwendung von scharfen Chemikalien oder Scheuermitteln, die die Oberfläche oder das gehärtete Glas beschädigen könnten.

Fehlerbehebung

System lässt sich nicht einschalten

• Ensure the power supply is properly connected to the wall outlet and the PSU switch is in the 'ON' position.
• Vergewissern Sie sich, dass das 24-polige ATX-Stromkabel und das CPU-Stromkabel fest mit dem Motherboard verbunden sind.
• Prüfen Sie, ob das Kabel des Netzschalters an der Vorderseite korrekt an den Frontpanel-Anschluss des Mainboards angeschlossen ist. Die korrekte Pinbelegung finden Sie im Handbuch Ihres Mainboards.

Fans Not Spinning or ARGB Not Lighting Up

• Ensure the 8+8 Pin ARGB/Fan controller is receiving power via its SATA power connector from the PSU.
• Verify that the fans are correctly connected to the controller.
• If using motherboard software control, ensure the controller's ARGB cable is connected to the motherboard's 3-pin ARGB header and the software is installed and configured correctly.
• If using the case's LED/Reset button for control, ensure the button's cable is connected to the controller.

Schlechte Luftzirkulation oder hohe Temperaturen

• Clean the magnetic dust filters regularly as described in the Maintenance section.
• Ensure all fans are spinning in the correct direction for optimal airflow (intake from front/bottom, exhaust from top/rear). The BitFenix CETO Basic includes both positive and reverse fans for optimized airflow.
• Check for proper cable management to avoid obstructing airflow paths.
• Verify that CPU cooler and GPU fans are functioning correctly.

Garantie und Support

For warranty information and technical support, please refer to the official BitFenix webBesuchen Sie unsere Website oder wenden Sie sich an Ihren Händler vor Ort. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Hersteller: BITFENIX

Modell: BFC-CET-200-WWGSW-3A

WebWebsite: www.bitfenix.com