M5Stack Cardputer v1.1

Offizieller M5Stack Cardputer mit M5stampS3 v1.1 Entwicklungskit – Benutzerhandbuch

Brand: M5Stack | Model: Cardputer v1.1

1. Einleitung

This manual provides essential information for the M5Stack Official Cardputer with M5stampS3 v1.1 Development Kit. It covers product features, setup instructions, operational guidelines, maintenance tips, and technical specifications to ensure proper use and functionality.

M5Stack Cardputer v1.1 Development Kit

Image 1.1: The M5Stack Cardputer v1.1 Development Kit, a compact, card-sized computer with a full QWERTY keyboard and integrated M5stampS3 microcontroller.

2. Packungsinhalt und Einrichtung

2.1. Lieferumfang

  • Cardputer v1.1 x 1
  • L-shaped hex wrench 1.5mm (for M2 screws) x 1
M5Stack Cardputer and hex wrench

Image 2.1: The Cardputer v1.1 and the included hex wrench for potential assembly or maintenance.

2.2. Erste Inbetriebnahme und Konfiguration

  1. Stromanschluss: Connect the Cardputer to a power source using the USB-C port. The device includes a 1400mAh battery.
  2. Einsetzen der SD-Karte: For optimal use, insert a Micro SD card (32GB or less recommended) into the designated slot.
  3. Firmware: The device comes with pre-installed firmware. To explore additional functionalities or custom applications, consider installing the M5 Launcher or M5Stack Burner. Refer to the official M5Stack website for detailed instructions and available firmware.

3. Hardware-Overview

The Cardputer v1.1 integrates several components into a compact form factor.

Labeled diagram of M5Stack Cardputer v1.1 features

Image 3.1: Key external features of the Cardputer v1.1, including the 1.14" IPS-LCD, 56-key keyboard, microphone, speaker, and M5stampS3-Modul.

3.1. Hauptkomponenten

  • Mikrocontroller: M5stampS3 (ESP32-S3)
  • Anzeige: 1.14-inch IPS-LCD (ST7789V2, 240x135 pixels)
  • Eingang: 56-key QWERTY keyboard, PDM-MIC@SPM1423 (microphone)
  • Ausgabe: I2S-Speaker@NS4168 (1W speaker)
  • Konnektivität: Wi-Fi, Bluetooth, Grove port (G5V G2 G1), Micro SD card slot, USB-C
  • Leistung: Internal 120mAh battery, additional 1400mAh battery in the backpack module.
  • Andere: IR G44 (infrared), Magnet, Button RST (reset), Button GO.
Intern view of M5Stack Cardputer v1.1 board with labeled components

Abbildung 3.2: Ein interner view of the Cardputer's main board, highlighting the M5stampS3, IPS-LCD, and various connection points.

3.2. Physikalische Abmessungen

The device measures approximately 84mm (3.3in) in length, 54mm (2.1in) in width, and 19.7mm (0.77in) in thickness, with a weight of approximately 90.0 grams.

M5Stack Cardputer v1.1 with dimensions labeled

Image 3.3: Physical dimensions of the M5Stack Cardputer v1.1.

4. Operating the Cardputer

4.1. Keyboard and Screen Interaction

The Cardputer features a 56-key QWERTY keyboard for text input and command execution. The 1.14-inch IPS-LCD provides visual feedback and interface navigation.

Close-up of M5Stack Cardputer v1.1 screen and keyboard

Abbildung 4.1: Eine detaillierte view of the Cardputer's screen and keyboard, showing key layout and display clarity.

4.2. Basic Functions and Applications

The Cardputer is designed for various development and learning applications. Depending on the loaded firmware, it can perform tasks such as:

  • Wi-Fi scanning and network analysis
  • Zeitfunktionen
  • System hardware tests (e.g., display, microphone, speaker, gyroscope)
  • Infrared remote control capabilities
  • Bluetooth Low Energy (BLE)-Kommunikation
  • Embedded system development and learning
  • Industrial control and automation
  • Home control systems
  • Wireless communication and IoT projects
M5Stack Cardputer v1.1 screen displaying various functions

Image 4.2: The Cardputer's screen interface, showing options for Wi-Fi scan, record, chat, and other functions.

4.3. Konnektivitätsports

The device offers multiple connectivity options for expansion and interaction:

  • Hafen von Grove: For connecting M5Stack's ecosystem of modules and sensors.
  • Micro-SD-Kartensteckplatz: Für externe Speicherung.
  • USB-C-Anschluss: For power, data transfer, and programming.
Seite view of M5Stack Cardputer v1.1 with Grove port

Abbildung 4.3: Seite view showing the Grove port for external module connections.

Seite view of M5Stack Cardputer v1.1 with Micro SD card slot

Abbildung 4.4: Seite view showing the Micro SD card slot for expandable storage.

5. Spezifikationen

BesonderheitDetail
SoCESP32-S3@Xtensa LX7 Wi-Fi, USB-OTG function
Blitz16 MB Flash
PSRAM8 MB PSRAM
W-lan802.11 b/g/n (2.4 GHz Wi-Fi)
BerührenFT6336U@capacitive touch, touch area pixels 320 x 280 (Note: Product description states 1.14" IPS-LCD 240x135, this touch spec might be for a different model or general capability)
LCD Bildschirm1.14"@240 x 135 ILI9342C, SPI communication
Power-Management-ChipAXP2101
EchtzeituhrBM8563
CPU-HerstellerEspressif
Anzahl der Prozessoren2
RAMLPDDR4
BetriebssystemLinux (Note: This is a general capability, specific firmware may vary)
Artikelgewicht3.52 Unzen
Verpackungsabmessungen5.63 x 3.58 x 0.91 Zoll
Batterien1 nicht standardmäßige Batterie (im Lieferumfang enthalten)

6. Wartung

6.1. Batteriepflege

The Cardputer contains an internal 120mAh battery and an additional 1400mAh battery in the backpack module. To prolong battery life:

  • Vermeiden Sie extreme Temperaturen.
  • Charge the device regularly, but avoid overcharging or completely draining the battery for extended periods.
  • Verwenden Sie zum Aufladen das mitgelieferte USB-C-Kabel.
Explodierte view of M5Stack Cardputer v1.1 showing internal battery

Abbildung 6.1: Eine explodierte view illustrating the internal battery component of the Cardputer.

6.2. Reinigung

Reinigen Sie das Gerät mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von scharfen Chemikalien oder Scheuermitteln, die den Bildschirm oder die Elektronik beschädigen könnten.asing.

7. Fehlerbehebung

If you encounter issues with your Cardputer, consider the following general troubleshooting steps:

  • Probleme mit der Stromversorgung: Stellen Sie sicher, dass das Gerät vollständig aufgeladen oder an eine stabile Stromquelle angeschlossen ist.
  • Gerät reagiert nicht: Try pressing the Reset button (BtnRst) or power cycling the device using the ON/OFF switch.
  • Firmware Related: If a specific function is not working, it might be related to the installed firmware. Check the M5Stack official documentation for firmware updates or alternative firmware options.
  • Konnektivität: Verify all physical connections (USB-C, Grove, SD card) are secure.

For more detailed troubleshooting guides and community support, visit the official M5Stack webWebsite: m5stack.com. Navigate to the 'DOCUMENT' section and search for your product model to find tutorials and resources.

8. Garantie und Support

The M5Stack Cardputer v1.1 Development Kit is covered by the manufacturer's standard warranty. For specific warranty terms, technical support, or service inquiries, please refer to the official M5Stack website or contact their customer service directly. Additional protection plans may be available from your retailer.

Zugehörige Dokumente - Cardputer v1.1

Vorview M5Stack Cardputer V1.1: Leitfaden für tragbare Computer und Entwicklungsplattformen
Ausführlicher Leitfaden zum M5Stack Cardputer v1.1, einem leistungsstarken tragbaren Computer für Ingenieure und Entwickler. Funktionen StampS3A-Controller, 56-Tasten-Tastatur, 1.14-Zoll-TFT-Bildschirm, MEMS-Mikrofon und umfangreiche Anschlussmöglichkeiten. Inklusive Installationsanleitung, FAQs, Spezifikationen und Details zur Entwicklungsplattform.
Vorview M5STACK Cardputer: Tragbarer ESP32-S3 Entwicklungscomputer
Entdecken Sie den M5STACK Cardputer, einen kompakten und vielseitigen Entwicklungsrechner mit ESP32-S3FN8-Chip, 56-Tasten-Tastatur, TFT-Bildschirm und umfangreichen Anschlussmöglichkeiten für schnelles Prototyping und Embedded-Projekte.
Vorview M5Stack Cardputer V1.1 Benutzerhandbuch und Firmware-Flashing
Umfassende Anleitung für den M5Stack Cardputer V1.1. Sie umfasst das Flashen der werkseitigen Firmware, die Behebung häufiger Probleme wie schwarzer Bildschirme und die Installation des USB-Treibers mit M5Burner. Erfahren Sie, wie Sie Ihr Gerät vorbereiten, Treiber installieren, Anschlüsse auswählen und Firmware brennen.
Vorview M5STACK Dinmeter: Product Overview und Kurzanleitung
Comprehensive guide to the M5STACK Dinmeter, an embedded development board powered by M5StampS3. Features include a 1.14-inch screen, rotary encoder, and extensive connectivity. Learn about its specifications and how to perform WiFi and BLE scans with Arduino IDE.
Vorview M5 STACK STAMPS3 Datenblatt und technische Spezifikationen
Entdecken Sie den M5STACK STAMPS3-Entwicklungsboard mit dem ESP32-S3-Chip mit WLAN und Bluetooth 5 (LE). Dieses Datenblatt beschreibt die Hardwarezusammensetzung, Pin-Beschreibungen, Funktionsumfang und elektrischen Eigenschaften für IoT-Projekte.
Vorview M5Stack AtomS3-Lite ESP32-S3 Entwicklungsboard
Entdecken Sie das M5Stack AtomS3-Lite, ein kompaktes ESP32-S3-Entwicklungsboard mit WLAN, integrierter Antenne und vielseitigen Schnittstellen für IoT- und Mikrocontroller-Projekte. Erfahren Sie mehr über seine Spezifikationen, Funktionen und Entwicklungsmöglichkeiten mit Arduino IDE und UiFlow2.