ANZZI Series Frameless Sliding Shower Door

Einführung

This manual provides detailed instructions for the installation, operation, and maintenance of your ANZZI Series frameless sliding shower door. Please read all instructions carefully before beginning installation to ensure proper function and safety. Professional installation is recommended.

Abbildung 1: Vorderseite view of the ANZZI Series Frameless Sliding Shower Door.

Sicherheitshinweise

• Tragen Sie während der Installation immer eine Schutzbrille.
• Handle glass panels with extreme care. Tempered glass can shatter if struck at the edges.
• Stellen Sie sicher, dass alle Montageflächen statisch tragfähig sind und das Gewicht der Duschtür tragen können.
• Verwenden Sie geeignete Werkzeuge und beachten Sie alle örtlichen Bauvorschriften.
• Schrauben nicht zu fest anziehen, da dies Bauteile oder Glas beschädigen kann.
• Halten Sie Kinder und Haustiere vom Installationsbereich fern.

Packungsinhalt

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact ANZZI customer support.

• Tempered Clear Glass Panels (Deco-Glass, 3/8" / 10mm thick)
• Rhino Alloy Hardware (Brushed Gold finish)
• Sliding Rail and Rollers
• Wall Brackets and Support Bar
• Bottom Rail and Guide Block
• Türgriffe
• Dichtungsstreifen und Dichtungen
• Installation Screws and Anchors

Technische Daten

Figure 2: Product dimensions and reversible installation feature.

Setup und Installation

For a visual guide, please refer to the official installation video below. Ensure you have all necessary tools and follow safety precautions.

Wichtige Installationsschritte:

1. Messen und vorbereiten: Accurately measure your shower opening (W1 and W2) to ensure proper fit. Verify walls are plumb and level. Mark the installation points for the wall brackets.
2. Wandhalterungen installieren: Drill holes at the marked locations. Secure the wall bracket plates, ensuring they are plumb.
3. Stützstange vorbereiten: Remove wall brackets from the support bar. If necessary, cut the support bar to the required length (W1 minus 1.5 inches).
4. Install Support Bar: Attach the support bar to the installed wall bracket plates. Ensure it is level and secure.
5. Install Bottom Rail and Guide Block: Position the bottom rail and guide block at the center of the shower base. Mark and drill holes. Secure with screws if drilling into acrylic or wood, or use silicone sealant for tile.
6. Rollen an Glasscheiben anbringen: Assemble the rollers, gaskets, washers, and stoppers onto the glass panels. Ensure the side holes point upward.
7. Hang Fixed Glass Panel: Carefully lift and hang the fixed glass panel onto the support bar. Ensure it is properly seated and secured.
8. Hängende Glasschiebewand: Hang the sliding glass panel onto the support bar. Place a cloth or blanket under the door for protection during this step.
9. Türausrichtung anpassen: Slightly push the door to the wall to check if the water sealing strip aligns. If not, loosen the screw of the roller and turn the eccentric block to adjust the door's position. Retighten screws after adjustment.
10. Türgriffe montieren: Attach the door handles to the designated holes on the glass panels using the provided screws, anchors, and gaskets.
11. Silikondichtstoff auftragen: Apply silicone sealant along the bottom rail and vertical edges where the glass meets the wall to ensure a watertight seal.

Abbildung 3: Umkehrbare Installationsmöglichkeiten für links- oder rechtsseitige Öffnung.

Bedienungsanleitung

Your ANZZI frameless sliding shower door is designed for smooth and quiet operation. To open or close the door, gently slide the handle along the track. Avoid forcing the door, as this may damage the rollers or track. The door features easy glide rollers for effortless movement.

Wartung

Regelmäßige Reinigung und Wartung gewährleisten die Langlebigkeit und das Aussehen Ihrer Duschabtrennung.

• Glasreinigung: The Tsunami Guard coating repels water, soap scum, and mineral staining, making cleaning easier. For best results, wipe down the glass after each use with a soft cloth or squeegee. For deeper cleaning, use a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that could damage the Tsunami Guard coating.
• Hardware-Reinigung: Clean the brushed gold Rhino Alloy hardware with a soft, damp cloth. Do not use abrasive cleaners, steel wool, or cleaners containing ammonia, bleach, or acid, as these can damage the finish.
• Dichtungen und Dichtungsringe: Periodically check the sealing strips and gaskets for wear or damage. Replace them if necessary to maintain a watertight enclosure.
• Rollenwartung: Ensure the rollers are free of debris and operate smoothly. If they become stiff, clean them and apply a small amount of silicone-based lubricant if needed.

Figure 4: Deco-Glass with Tsunami Guard coating for easy cleaning.

Fehlerbehebung

If you encounter issues with your shower door, try the following solutions:

• Die Tür lässt sich nicht reibungslos verschieben: Check rollers for debris. Clean and lubricate if necessary. Ensure the track is clear.
• Wasserleck: Inspect all silicone sealant lines and sealing strips. Reapply sealant or replace worn seals as needed. Ensure the door is properly aligned and closes completely.
• Door alignment issues: Refer to the installation video and step 9 in the Setup section to adjust the eccentric blocks on the rollers.

Garantie und Support

ANZZI offers peace of mind with a LEBENSLANGE GARANTIE on all products, reflecting our commitment to quality and durability. For technical assistance, replacement parts, or warranty claims, please contact ANZZI customer support.

ANZZI Customer Support:

• WebWebsite: www.anzzi.com
• Telefon: 1-844-44-ANZZI (for general inquiries)
• E-Mail: support@anzzi.com