Polibi Extendable Farmhouse Dining Table Set User Manual

1. Einleitung

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Polibi 5-Piece Extendable Farmhouse Dining Table Set. Please read all instructions carefully before assembly and use to ensure proper function and longevity of your furniture.

Image 1.1: The Polibi 5-Piece Extendable Farmhouse Dining Table Set in a typical home environment.

2. Sicherheitshinweise

• Sämtliche Montageteile müssen für Kinder unzugänglich aufbewahrt werden.
• Vor Gebrauch sicherstellen, dass alle Schrauben und Bolzen fest angezogen sind. Regelmäßig überprüfen und gegebenenfalls nachziehen.
• Stehen oder sitzen Sie nicht auf dem Tisch.
• Do not exceed the weight capacity of the table (350 lbs) or chairs (250 lbs).
• Use on a level surface to prevent wobbling or tipping.
• Vermeiden Sie es, heiße Gegenstände ungeschützt direkt auf die Tischplatte zu stellen.

3. Packungsinhalt

Prüfen Sie vor Beginn der Montage, ob alle Komponenten vorhanden sind. Sollten Teile fehlen oder beschädigt sein, wenden Sie sich bitte an den Kundendienst.

Table Components:

• Tabletop (with removable leaf)
• Tischbeine (4)
• X-shaped Stretchers (2 sets)
• Hardware-Set (Schrauben, Unterlegscheiben, Inbusschlüssel)

Chair Components (x4):

• Chair Backrest (1 per chair)
• Chair Seat (1 per chair)
• Front Legs (2 per chair)
• Back Legs (2 per chair)
• Side and Front Stretchers (various per chair)
• Hardware-Set (Schrauben, Unterlegscheiben, Inbusschlüssel)

4. Aufbau und Montage

Assembly typically requires two adults. Clear a spacious area and lay out all components on a soft, clean surface to prevent scratches.

4.1 Tischmontage

1. Attach the table legs to the X-shaped stretchers. Ensure the stretchers are correctly oriented to form a stable base.


Image 4.1.1: Detail of the table's X-shaped stretchers for stability.

2. Carefully place the tabletop upside down on a protected surface.
3. Align the assembled leg and stretcher base with the pre-drilled holes on the underside of the tabletop.


Image 4.1.2: Underside of the table, illustrating leg attachment points.

4. Secure the base to the tabletop using the provided bolts and washers. Tighten all fasteners evenly with the Allen wrench.
5. Carefully flip the table upright.

4.2 Chair Assembly (Repeat for each of the 4 chairs)

1. Attach the front legs to the chair seat using the provided hardware.
2. Attach the back legs to the chair seat and backrest.
3. Connect the side and front stretchers between the legs to enhance stability.


Image 4.2.1: Details of chair construction, including cushion and frame.

4. Stellen Sie sicher, dass alle Schrauben fest angezogen sind. Ziehen Sie sie nicht zu fest an.

5. Operating Instructions: Extending and Retracting the Table Leaf

Your dining table features a removable leaf to adjust its length from 42 inches (round) to 57.7 inches (oval).

5.1 To Extend the Table:

1. Gently pull the two halves of the tabletop apart from the center. The table will slide on its runners.
2. Insert the 15.7-inch removable leaf into the gap created in the center of the table.
3. Push the two tabletop halves back together until they are flush with the leaf and securely locked.


Image 5.1.1: Visual guide for extending the table with the removable leaf.

5.2 To Retract the Table:

1. Pull the two halves of the tabletop apart slightly.
2. Carefully lift and remove the middle leaf. Store the leaf in a safe place to prevent damage.


Image 5.2.1: The table in its compact, round configuration with the leaf removed.

3. Push the two tabletop halves back together until they meet, forming the round table.

6. Wartung

6.1 Wood Surfaces (Table)

• Regelmäßig mit einem weichen, fusselfreien Tuch abwischen.amp Mit einem sauberen, trockenen Tuch sofort trocknen.
• Avoid using harsh chemicals, abrasive cleaners, or polishes that contain silicone.
• Protect from direct sunlight and extreme temperature changes to prevent warping or fading.
• Use coasters and placemats to protect the surface from spills and heat.

6.2 Upholstered Chairs

• Vacuum regularly with an upholstery attachment to remove dust and debris.
• Verschüttete Flüssigkeiten sofort mit einem sauberen, trockenen Tuch oder Feuchttuch punktuell reinigen.amp cloth and mild soap. Blot, do not rub.
• Vollständig an der Luft trocknen lassen.
• Um ein Ausbleichen des Stoffes zu verhindern, vermeiden Sie längere direkte Sonneneinstrahlung.

7. Fehlerbehebung

7.1 Table or Chair is Wobbly

• Lösung: Check all bolts and screws. Tighten any loose fasteners. Ensure the furniture is on a level surface.

7.2 Table Leaf Does Not Fit Properly

• Lösung: Ensure the table halves are pulled apart evenly and fully before inserting the leaf. Verify the leaf is oriented correctly. If the issue persists, check for any obstructions in the sliding mechanism.

7.3 Scratches or Minor Damage to Wood

• Lösung: For minor scratches, a wood repair marker or furniture polish designed for birch veneer may be used. Consult a professional for significant damage.

8. Spezifikationen

Image 8.1: Dimensional drawing of the table and chairs.

9. Garantie und Support

For warranty information, missing parts, or further assistance, please refer to your purchase documentation or contact Polibi customer support directly. Contact details can typically be found on the retailer's website or within your order history.