Einführung
The BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable is designed to provide efficient charging and high-speed data transfer for your compatible devices, such as the Sonim H100 4G. This 6-foot cable offers reliable connectivity and durability for everyday use.
Produkteigenschaften
- Hi-Speed USB 3.1 Data Transfers: Supports rapid data synchronization.
- Doppelfunktionalität: Capable of both charging your device and transferring data simultaneously.
- Generous 6-Foot Length: Provides flexibility and convenience for use in various settings.
- Shielded Cable Design: Offers protection for enhanced durability and longevity.
- Reinforced Strain Reliefs: Features strong rubberized grommet strain reliefs to prevent kinks and splitting at the connectors.
Aufstellen
Setting up your DirectSync cable is straightforward. No software installation is required for basic functionality.
- Ports identifizieren: Locate the USB-A port on your charging adapter, computer, or power bank, and the USB-C port on your device (e.g., Sonim H100 4G).
- USB-A anschließen: Insert the USB-A end of the DirectSync cable into a compatible USB-A port on your power source or computer.
- USB-C anschließen: Insert the USB-C end of the DirectSync cable into the USB-C port on your device.
- Verbindung überprüfen: Ensure both ends are securely connected. Your device should indicate charging or a data connection.
Bedienungsanleitung
Aufladen Ihres Geräts
To charge your device, connect the DirectSync cable as described in the Setup section. The cable will deliver power from the USB-A source to your USB-C device. Charging speed may vary depending on the power output of your charger and the device's charging capabilities.
Datensynchronisation
For data transfer, connect the USB-A end to a computer's USB 3.0 or higher port and the USB-C end to your device. Your computer should recognize the connected device, allowing you to transfer files, photos, and other data at high speeds (up to USB 3.1 specifications).
Wartung
Proper care will extend the life of your DirectSync cable.
- Lagerung: When not in use, coil the cable loosely. Avoid sharp bends or kinks, especially near the connectors.
- Reinigung: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners or abrasive materials.
- Handhabung: Always pull from the connector head, not the cable itself, when unplugging.
- Umfeld: Das Kabel darf keinen extremen Temperaturen, direkter Sonneneinstrahlung oder übermäßiger Feuchtigkeit ausgesetzt werden.
Fehlerbehebung
| Ausgabe | Mögliche Ursache | Lösung |
|---|---|---|
| Gerät wird nicht geladen. | Loose connection, faulty power source, or incompatible device. | Ensure both ends of the cable are securely plugged in. Try a different power outlet or USB port. Verify your device supports USB-C charging. |
| Langsame Ladegeschwindigkeit. | Low power output from source, or device limitation. | Use a charger with higher power output (e.g., a wall adapter instead of a computer USB port). Ensure your device supports fast charging if applicable. |
| Datenübertragung funktioniert nicht. | Loose connection, incorrect USB port on computer, or device settings. | Reconnect the cable. Try a different USB port on your computer (preferably a USB 3.0 or higher port). Check your device's USB connection settings (e.g., "File Transfermodus). |
| Das Kabel scheint beschädigt zu sein. | Physischer Stress oder unsachgemäße Handhabung. | Discontinue use immediately to prevent damage to your devices. Replace the cable. |
Technische Daten
- Produktname: BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable
- Modell: DirectSync
- Steckertyp 1: USB 3.0 Type-A Male
- Steckertyp 2: USB 3.1 Type-C Male
- Kabellänge: 6 Fuß (ungefähr 1.8 Meter)
- Datenübertragungsgeschwindigkeit: Supports Hi-Speed USB 3.1 (up to 5Gbps)
- Funktionalität: Charge and Sync
- Farbe: Schwarz
- Artikelgewicht: 3 Unzen
- Hersteller: BoxWave
Garantie und Support
BoxWave products are designed for quality and reliability. This product includes limited 3rd party technical support for your device (up to 3 inquiries via messaging). For further assistance or warranty inquiries, please contact BoxWave Corporation directly through their official support channels.
Please note that this product is not affiliated with or endorsed by Sonim.
