1. Einleitung
Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.
Bild 1.1: Vorderseite view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.
2. Sicherheitshinweise
Um das Risiko von Bränden, Stromschlägen oder Verletzungen zu verringern, befolgen Sie stets diese grundlegenden Sicherheitsvorkehrungen:
- WARNUNG: Stromschlaggefahr. Trennen Sie vor der Installation oder Wartung die Stromversorgung von der Sicherung oder dem Schutzschalter.
- Dieses Produkt muss gemäß den geltenden Installationsvorschriften von einer Person installiert werden, die mit der Konstruktion und Bedienung des Produkts und den damit verbundenen Gefahren vertraut ist.
- Use only 120V AC, 60Hz circuits.
- Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
- Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind.
- Diese Leuchte ist nur für den Innenbereich geeignet.
3. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- 6-Inch Black Motion Sensor LED Ceiling Light (x1)
- Befestigungsmaterial (Schrauben, Drahtklemmen)
- E26 Adapter Accessories (for recessed can installation)
- Bedienungsanleitung (dieses Dokument)
Abbildung 3.1: Im Lieferumfang enthaltenes Zubehör für die Installation.
4. Produktmerkmale
- 3CCT auswählbar: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
- Bewegungssensor: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
- Einstellbare Zeitverzögerung: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
- Lichtsensor: The motion sensor functions only in dark environments, remaining off during daylight hours.
- Energieeffizient: 16W LED provides 1000 lumens of brightness.
- Vielseitige Installation: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.
Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.
5. Einrichtung und Installation
Before installation, ensure the power supply is turned off at the circuit breaker.
5.1. Installation der Anschlussdose
- Entfernen Sie die Linse, indem Sie sie im Uhrzeigersinn drehen.
- Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
- Attach the fixture base to the junction box using the provided screws.
- Twist the lens counter-clockwise to secure it back onto the fixture.
5.2. Recessed Can Installation
- Entfernen Sie die Linse, indem Sie sie im Uhrzeigersinn drehen.
- Install the spring clips onto the fixture base using screws.
- Connect the E26 adapter to the existing socket in the recessed can.
- Connect the fixture wires to the E26 adapter wires using wire nuts.
- Push the disk light into the recessed can until the spring clips secure it.
- Twist the lens counter-clockwise to secure it back onto the fixture.
Image 5.1: Installation diagrams for junction box and recessed can.
6. Bedienungsanleitung
After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.
6.1. Funktionalität des Bewegungssensors
- Tageszeit: The light remains off even if motion is detected, due to the integrated light sensor.
- Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
- The light will turn off after the set time delay if no further motion is detected.
Image 6.1: Motion sensor operation during day and night.
6.2. Color Temperature (CCT) Adjustment
The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:
- Stellen Sie sicher, dass die Stromversorgung ausgeschaltet ist.
- Carefully remove the lens by twisting it clockwise.
- Locate the CCT selector switch on the LED board (refer to Image 4.1).
- Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
- Replace the lens by twisting it counter-clockwise.
- Restore power to test the new setting.
Image 6.2: Visual representation of 3CCT options.
6.3. Zeitverzögerungseinstellung
The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:
- Stellen Sie sicher, dass die Stromversorgung ausgeschaltet ist.
- Carefully remove the lens by twisting it clockwise.
- Locate the time delay selector switch on the fixture (refer to Image 4.1).
- Slide the switch to your desired time setting (30s, 1min, or 5mins).
- Replace the lens by twisting it counter-clockwise.
- Restore power to test the new setting.
Image 6.3: Time delay countdown feature.
7. Wartung
The ECOELER LED ceiling light requires minimal maintenance.
- Reinigung: Vor der Reinigung unbedingt den Strom abschalten. Wischen Sie die Leuchte mit einem weichen, trockenen oder leicht feuchten Tuch ab.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
- Linse: Keep the lens clean to ensure optimal light output and motion sensor performance.
8. Fehlerbehebung
If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | No power supply; Incorrect wiring; Ambient light too bright; Motion sensor obstructed or faulty. | Check circuit breaker and wall switch. Verify wiring connections. Ensure installation is in a dark environment for sensor activation. Clear any obstructions from the sensor. |
| Licht bleibt dauerhaft an. | Constant motion in detection area; Faulty motion sensor. | Ensure there is no continuous motion within the sensor's range. If the issue persists, contact customer support. |
| Light turns off too quickly or too slowly. | Die Zeitverzögerungseinstellung ist falsch. | Adjust the time delay switch to your desired setting (30s, 1min, or 5mins) as described in Section 6.3. |
| Das Licht flackert oder wird unerwartet dunkler. | Loose wiring connection; Incompatible dimmer switch (this light is non-dimmable); Power fluctuations. | Check all wiring connections for tightness. Ensure no dimmer switch is being used. Consult an electrician if power fluctuations are suspected. |
9. Spezifikationen
| Marke | ECOELER |
| Modellnummer | CDR616C-9P3X5BB |
| Technische Daten | 7.48 Zoll L x 7.48 Zoll B x 1.45 Zoll H |
| Artikelgewicht | 11.3 Unzen |
| Farbe | Schwarz |
| Material | Acryl, Aluminium, Kunststoff |
| Stromquelle | Kabelgebundene Elektrik |
| Bandtage | 120 Volt (Wechselstrom) |
| Wastage | 16 Watt |
| Helligkeit | 1000 Lumen |
| Lichtfarbe | 3CCT: 3000K (Warm White) - 4000K (Cool White) - 5000K (Daylight) |
| Controllertyp | Bewegungssensor |
| Besondere Merkmale | 30sec-1min-5min Countdown Timer Selectable, Adjustable Color Temperature, Energy Efficient, Motion Sensor, Shock Resistant |
| Installationstyp | Unterputz |
| Zertifizierung | ETL, FCC |
10. Garantie und Support
This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.
For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webWebsite.
Hersteller: ECOELER ELECTRIC INC
